LPROF is the only open source ICC profiler with a graphical user
interface. It can be used to create ICC version 2 compliant profiles
for cameras, scanners and monitors. As such it fills a necessary
niche in the emerging open source color management effort.
WWW: http://lprof.sourceforge.net
===> The following configuration options are available for lprof-devel-20080514_14:
DOCS=on: Build and/or install documentation
===> Use 'make config' to modify these settings
Qt4 deprecation: Remove Qt4 and its consumes.
2019-03-15 accessibility/qt4-accessible: Qt4 has been EOL since december 2015
2019-03-15 astro/qlandkartegt: Qt4 has been EOL since december 2015
2019-03-15 astro/stellarium-qt4: Qt4 has been EOL since december 2015
2019-03-15 astro/xglobe: Qt4 has been EOL since december 2015
2019-03-15 audio/acoustid-fingerprinter: Qt4 has been EOL since december 2015
2019-03-15 audio/cueplayer: Qt4 has been EOL since december 2015
2019-03-15 audio/esperanza: Qt4 has been EOL since december 2015
2019-03-15 audio/lastfm-desktop: Qt4 has been EOL since december 2015
2019-03-15 audio/minitunes: Qt4 has been EOL since december 2015
2019-03-15 audio/mixxx20: Qt4 has been EOL since december 2015
2019-03-15 audio/mumble: Qt4 has been EOL since december 2015
2019-03-15 audio/murmur: Qt4 has been EOL since december 2015
2019-03-15 audio/puddletag: Qt4 has been EOL since december 2015
(Only the first 15 lines of the commit message are shown above )
Change cmake default behaviour to outsource.
Ports that build out of source now simply can use "USES=cmake"
instead of "USES=cmake:outsource". Ports that fail to build
out of source now need to specify "USES=cmake:insource".
I tried to only set insource where explictely needed.
PR: 232038
Exp-run by: antoine
Bump PORTREVISION for ports depending on the canonical version of GCC
defined via Mk/bsd.default-versions.mk which has moved from GCC 7.4 t
GCC 8.2 under most circumstances.
This includes ports
- with USE_GCC=yes or USE_GCC=any,
- with USES=fortran,
- using Mk/bsd.octave.mk which in turn features USES=fortran, and
- with USES=compiler specifying openmp, nestedfct, c11, c++0x, c++11-lang,
c++11-lib, c++14-lang, c++17-lang, or gcc-c++11-lib
plus, as a double check, everything INDEX-11 showed depending on lang/gcc7.
PR: 231590
Mark QT4 ports/functionality for removal on 2019-03-15
While here, chase some KDE4 ports and functionality, these are scheduled for
removal on 2018-12-31. Change the default option/flavor to QT5 where applicable
or use alternative toolkits like GTK.
Submitted by: tcberner
Reviewed by: adridg, jhale, rene, tcberner
Approved by: portmgr (implicit, flavor hook)
Differential Revision: https://reviews.freebsd.org/D17741
Replace bsd.qt.mk by Uses/qt.mk and Uses/qt-dist.mk
From now on, ports that depend on Qt4 will have to set
USES= qt:4
USE_QT= foo bar
ports depending on Qt5 will use
USES= qt:5
USE_QT= foo bar
PR: 229225
Exp-run by: antoine
Reviewed by: mat
Approved by: portmgr (antoine)
Differential Revision: -https://reviews.freebsd.org/D15540
Update Qt5 to 5.7.1, and unify the Qt4 and Qt5 ports some more
* Update Qt5 to 5.7.1
* Move Qt4 binaries to lib/qt4/bin
* Move Qt5 libraries to lib/qt5/lib
By moving the libraries we should finally be able to get rid of the inplace
upgrade bug (see ports bugs 194088, 195105 and 198720): when Qt5's libraries
were lying in /usr/local/lib, which would often get added by pkgconfig to the
linker paths via dependencies, the already installed libraries were linked
against, instead of the ones that were being built. This forced us to make
sure, that -L${WRKSRC}/lib was always coming before -L/usr/local/lib in the
linker flags. With this change this should no longer be the case.
* Rename some ports to match the rest (foo-qtX -> qtX-foo)
* Depend on new port misc/qtchooser [see UPDATING & CHANGES]
There are several new Qt5 ports which all have been created by Marie Loise
Nolden
<nolden@kde.org>. Thanks again.
PR: 216797
Exp-Run by: antoine
Reviewed by: rakuco, mat, groot_kde.org
Approved by: rakuco (mentor)
Differential Revision: https://reviews.freebsd.org/D9213
Update the default version of GCC in the Ports Collection from GCC 4.7.4
to GCC 4.8.3.
Part II, Bump PORTREVISIONs.
PR: 192025
Tested by: antoine (-exp runs)
Approved by: portmgr (implicit)
Upgrade OpenEXR and ilmbase to 2.2.0.
GCC 4.2 in FreeBSD 8.X/9.X base is now too old to compile OpenEXR, so
GCC-based systems will upgrade to the default ports compiler (GCC 4.7
currently.)
Add two patches to OpenEXR to permit building it in a live system with
the older OpenEXR version installed. Bug report filed to upstream Github
at https://github.com/openexr/openexr/issues/130
Couple OpenEXR more tightly to ilmbase and require its exact .so
version.
Add UPDATING note, and bump PORTREVISION of all dependent ports.
Proto-STAGE hugin-devel, and mark it IGNORE because hugin is newer.
Approved by: portmgr (implicit for bumping PORTREVISION on unstaged ports)
- Remove manual creation and removal of share/applications, as it's now in the
mtree (categories starting with [fgijk])
Approved by: portmgr (bdrewery)
- Trim Makefile headers
- Drop ABI versions from LIB_DEPENDS
- OptionsNG
- Pet portlint
- Switch to dynamic plist where useful
- Canonicalize patch names
- Fix DOS line endings in patch files
In preparation of removing devel/libusb (expires 2013-04-30), remove it
from these ports.
Other changes:
- convert Makefile header
- convert to optionsNG
- remove indefinite article from comment
- drop support for FreeBSD < 8.0
- pet portlint (leave library ABI versions in LIB_DEPENDS)
- net-mgmt/spectools: change option name from GTK to GTK2 to use default
description from bsd.options.desc.mk
Approved by: portmgr (bapt)
- Change SET_DIRECTORY_PROPERTIES(INCLUDE_DIRECTORIES) to INCLUDE_DIRECTORIES in
cmake scripts to prepare for cmake 2.8.8
PR: 167488
Submitted by: Raphael Kubo da Costa <rakuco@FreeBSD.org>
Remove CMAKE_USE_PTHREAD from the ports using it.
This setting has not had any effect since r1.13 to bsd.cmake.mk, as it
was only useful when we supported FreeBSD < 7.
Approved by: avilla (mentor), portmgr (miwi)
Feature safe: yes
- Chase libusb20 rename in r189585.
- Mark sane-backends broken on current due to changes
in USB stack.
Reviewed by: thompsa (old version), miwi
Tested by: miwi
Bump portrevision due to upgrade of devel/gettext.
The affected ports are the ones with gettext as a run-dependency
according to ports/INDEX-7 (5007 of them) and the ones with USE_GETTEXT
in Makefile (29 of them).
PR: ports/124340
Submitted by: edwin@
Approved by: portmgr (pav)
LPROF is the only open source ICC profiler with a graphical user
interface. It can be used to create ICC version 2 compliant profiles
for cameras, scanners and monitors. As such it fills a necessary
niche in the emerging open source color management effort.
WWW: http://lprof.sourceforge.net
PR: ports/124240
Submitted by: Dmitry Marakasov <amdmi3 at amdmi3.ru>