Consolidate the Mesa ports, update to 17.0.4, and add Wayland option

* libGL, libEGL, libglesv2, libglapi, and gbm have been moved into mesa-libs,
  graphics/dri has been renamed to mesa-dri, and USE_GL has been adjusted
* mesa-libs has a new WAYLAND option that enables platform support in libEGL
* mesa-dri now depends on graphics/s2tc for compressed texture support [1]
* re-remove obsolete dependency on makedepends [2]
* correct sed fix backported from 17.1 [3]

PR:		218799 (exp-run), 212762 [1], 218552 [2], 218562 [3]
Submitted by:	dbn [1], jbeich [2,3]
Reported by:	afiskon@devzen.ru [1]
Reviewed by:	kwm, johalun0@gmail.com
Approved by:	portmgr, swills (mentor)
Differential Revision:  https://reviews.freebsd.org/D10448

Update Mesa to 17.0.3

* OpenGL 4.5 support for RadeonSI and recent Intel
* Use LLVM 4.0 by default, building with 3.9 is possible via MESA_LLVM_VER
* DRI3 remains enabled at compile time, but is now disabled at runtime for
  stock FreeBSD.  Set LIBGL_DRI3_ENABLE in the environment to enable DRI3.
  This extra check is added when compiling on stock FreeBSD, not DRM-next.
  This change was made to work around a problem in libEGL, which fails to
  fall back to using DRI2 when run on a system without DRI3 support.

Reviewed by:	jmd, mat
Approved by:	swills (mentor)
Differential Revision:	https://reviews.freebsd.org/D10250

Update to 13.0.6

- Allow use of newer LLVM, i.e. llvm40, via MESA_LLVM_VER in make.conf [1]
- Disable use of LLVM on platforms where it's known not to be available [2]

PR:		[1] 217016, [2] 216944
Reported by:	[1] greenreaper@hotmail.com, [2] linimon
Approved by:	swills (mentor)
Differential Revision:	https://reviews.freebsd.org/D10183

Update to 13.0.5

Approved by:	swills (mentor)
Differential Revision:	https://reviews.freebsd.org/D9781

Add one sed command, courtesy of madpilot, to replicate a section of changes
that were over-eagerly trimmed from patch-configure in the last commit.

Approved by:	swills (mentor)
Differential Revision:	https://reviews.freebsd.org/D9555

Remove post-patch cruft accidentally introduced into patch-configure files
with the previous commit. Thanks to tijl for noticing what I overlooked.

Approved by:	swills (mentor)
Differential Revision:	https://reviews.freebsd.org/D9544

Now that all supported FreeBSD versions support libmap.conf files installed
from ports, remove the symlink dance with libGL/libEGL/libgles and the
nvidia-driver ports.

* Revert libGL/libEGL/libglesv2 ports to normal.
* Rename the conflicting libraries from the nvidia-driver ports with a
  -NVIDIA prefix and install a libmap.conf file to map to these versions.
* Remove the special case from Mk/Scripts/qa.sh for libGL and libEGL.
* Sadly the symlink dance between nvidia-driver and xorg-server for glx.so
  need to stay, due to xorg-server opening that file with dlopen(3).

Approved by:	portmgr@ (mat@ (prio version))
Differential Revision:	https://reviews.freebsd.org/D7848

Update Mesa to 13.0.4

* Use LLVM 3.9
* OpenGL 4.4 support for recent Intel and ReadeonSI

PR:	214581
Approved by:	swills (mentor)
Differential Revision:	https://reviews.freebsd.org/D9438

- Remove always-true/false conditions after FreeBSD 9, 10.1, 10.2 EOL

Approved by:	portmgr blanket

- Remove always-true/false conditions after FreeBSD 9, 10.1, 10.2 EOL

Approved by:	portmgr blanket

graphics/libGL: fix typo

Update Mesa to 11.2.2.

Future mesa version will drop the glx-tls configure switch. This is by
default disabled on !linux and when the configure switch is dropped
glx-tls will be enabled always. Add a blob explaining why, we can't
enable this on FreeBSD yet. We might need to backport some patches
until we can.

Obtained from:	graphics team development repo.

Now that the bug in llvm37 is fixed [1], clover can be enabled again on
10.1-RELEASE i386.

[1] https://svnweb.freebsd.org/changeset/ports/412196

Remove ${PORTSDIR}/ from dependencies, categories d, e, f, and g.

With hat:	portmgr
Sponsored by:	Absolight

Exclude libclc (and thus OpenCL) on 10.1 i386.

There is a wierd issue with base clang and llvm37 which stops libclc to
build on 10.1 i386. So disable it so we don't block 1500+ ports.

Submitted by:	pkg-fallout via antoine@

Update Mesa to 11.1.2.

Switch to using llvm 3.7.

Obtained from:	graphics team development repo

Fix the build when libelf from ports is used (on dragonfly).

Reported by:	marino@

Update mesa to 11.0.8.

 * Depend on libelf on DragonFly
 * Rework the vdpau support code and enable vdpau for DragonFly, FreeBSD
   doesn't support it just yet.
 * Revert commit that removed support for non-render nodes. Neither
   FreeBSD nor DragonFly supports render nodes at this time.
 * Fix LDFLAGS to work with GCC5, which DragonFly uses by default.
 * Update Makefile.targets: ffast-math isn't used since 8.0.3, don't
   replace x86_64 with amd64 on Dragonfly. Drop obsolete python disable
   replace.

Update mesa to 11.0.7.

Add patch to use drm.h instead of redefining the types.

This unbreaks the build of xorg-server on 9.3.

Update Mesa ports to 11.0.6.

Obtained from:	x11 team development repo.

graphics/libGL: unbreak build on sparc64

Approved by:	x11 (kwm)
MFH:		2015Q4
Differential Revision:	https://reviews.freebsd.org/D4311

Fix the build on powerpc*
The gallium driver is called radeonsi not radeon.

Submitted by:	jmmv@, andreast@
Differential Revision:	https://reviews.freebsd.org/D3966

* Don't hardcode the Gallium drivers instead set the wanted drivers per
  arch, like is done for the dri drivers. This fixes Mesa build on arm. [1]
* Explicitly disable libva support. This resolves a build issue if libva
  is installed. [2]
* remove the gallium-intel configure flag, it is gone.

PR:		197548 [2]
Reported by:	sbruno@ [1]
Reported by:	rozhuk.im@gmail.com [2]
Tested by:	sbruno@ on arm [1]

Improve the sed replace, so it doesn't clobber 2>&1 redirection.

Submitted by:	Wolfgang Jenkner <wjenkner@inode.at>

Update Mesa to 10.6.9.

* Unbreak build on powerpc and other !x86 archs by moving the
  --with-dri-drivers logic from dri/Makefile to the
  libGL/Makefile.common file. So the settings are applied to all mesa ports,
  this was missed in the 10.6.6 update. [1]
* Don't try to enable OpenCL support on anything other then i386 and amd64. [1]
* Move the texture-float and vdpau logic to Makefile.common even if the latter
  isn't supported yet. Keep OPTIONS_DEFINE/DEFAULT in dri/Makefile since they
  need to defined before bsd.port.options.mk is included, and they only affect
  the dri modules.
* Sed on 11 and 10 supports \< and \> however sed on 9.x and dragonfly do not,
  replace the sed keywords with some magic to get the intended results. [2]

Submitted by:		marino@ [2]
Reported and tested by:	arved@ (on ppc32)[1]

Update Mesa 10.6.8.

Python is still needed at build time, don't depend on other software to
pull it in.

Update Mesa port to 10.6.6 and add Clover.
Add beignet 1.1.0.
Add clinfo, clblas, clfft and clrng.

The major change is that all Mesa ports are now configured the same way.
This fixes several problems and enables new features.  The details
are described in this blog post:
http://blogs.freebsdish.org/graphics/2015/03/18/unifying-mesa-ports-configure/

The second important change is the OpenCL support.  Mesa's
implementation, Clover, is enabled as well as Beignet.  Clover
targets all Gallium drivers, only Radeon GPUs in our case.  Beignet
is for Intel GPUs starting with Ivy Bridge.  Thanks to Johannes
Dieterich, O. Hartman, and Koop Mast for their work on OpenCL!  As a
bonus, there are several OpenCL-based math ports added (clblas,

Update mesa ports to 10.4.6.

Update the mesa ports to 10.4.5.

Update Mesa to 10.4.4.

Switch to llvm 3.5 for the Mesa 10.x series to be inline with the current
OpenCL work. There are regressions in llvm 3.4.x regarding OpenCL.

Obtained from:	graphics team devel repo

Update Mesa to 10.4.3.

Move LLVM version selection to bsd.mesalib.mk so the clover port can use it.
Clover isn't included yet because it is a work in progress and doesn't work
yet.

Fix plist.

Update mesa based ports to 10.4.0.

Split devel/gettext in devel/gettext-runtime and devel/gettext-tools.  The
first contains runtime libraries such as libintl and the latter contains
developer tools such as msgfmt.  Ports that use gettext will usually need
a LIB_DEPENDS on gettext-runtime and a BUILD_DEPENDS on gettext-tools.

USES=gettext-runtime can be used to set a LIB/BUILD/RUN_DEPENDS on
devel/gettext-runtime and USES=gettext-tools can be used to set a
BUILD/RUN_DEPENDS on devel/gettext-tools.  USES=gettext is now the same
as "USES=gettext-runtime gettext-tools" meaning a LIB_DEPENDS on
devel/gettext-runtime and a BUILD_DEPENDS on devel/gettext-tools.

Update gettext to 0.19.3.

Remove :oldver from converters/libiconv and devel/gettext-runtime.  Leave
symlinks with the old library versions to avoid the need to bump
PORTREVISION on a large number of dependent ports.  When most of the
dependent ports have had normal version updates, PORTREVISION can be
bumped on the remaining ones (low number) and the links can be removed.

Fix some ports that installed files in lib/locale instead of share/locale.

PR:		194038
Reviewed by:	bapt
Exp-run:	antoine
Approved by:	portmgr (antoine)

Update to 10.3.4.

Enable TEXTURE option in dri by default [1]. This allows for OpenGL higher
  then 2.1 to be supported.
Make sure we depend on llvm at run time when gallium is enabled.
  The gallium based modules link to the llvm shared libraries. [2]

PR:		followup on 194655 [2]
Approved by:	core@ [1]
Obtained from:	xorg-dev repo

Fix libEGL and libGLESv2 conflict between libEGL/libglesv2 and the
nvidia-driver port in the same fashion it was done as the conflict
with the libGL port.

Mesa ports:
Add pkg-[de]install scripts to handle the symlinks in the libEGL
  and libglesv2 port.
Move pkg-[de]install scripts of libGL out of files/
Put the real mesa libraries into lib/.mesa so we don't have each
  port create a directory for it own use.

Nvidia-driver:
Only apply the libEGL.so and libGLESv2.so alternative install
  directory if nvidia-driver actually ships them. Copied from
  PR submitter, since it was much cleaner then my initial attempt.

Update mesa to 10.3.3.

graphics/dri:
Move gettext:build to bsd.mesalib.mk so it present for all mesa ports. [1]
VDPAU needs GALLIUM so check for that, since it a Gallium state tracker. [1][2]
Rework llvm33/llvm34 selection so we can use the llvm version later on.
VDPAU links against the llvm libraries so we need to depend on the llvm port
as a run dependency .[1]
After discussion remove the VDPAU option for now. Radeon kernel drivers
currently
don't support hardware-assisted video decoding. And Gallium/VDPAU doesn't
support
the intel driver.

PR:		194655 [1]
PR:		194580 [2]

Update the "new" Mesa to 10.3.2.

Add code to select the correct MASTER_SITE.
Mesa version 10.3.0 -> distdir 10.3
Mesa version 10.3.2 -> distdir 10.3.2

Obtained from:	xorg-dev repo

graphics/libGL: Fix Gallium drivers on DragonFly (No-Op for FreeBSD)

Enable the new Mesa if the DragonFly version is new enough.

Submitted by:	Francois Tigeot

Update Mesa ports to new default of 9.1.7 and more recent version to 10.3.0.

The port will switch to the newer version if hw context is available in the
i915kms driver.

- Get ride of WITH_NEW_XORG.
- Use @comment in plist to ignore unwanted files in the stagedir, instead of
  trying to remove them in post-install.
- Bump portrevision of 9.1.7 due to dependency changes.
- Drop :keepla from USES=libtool.
- Drop @dirrm[try] from plists
- Give dri propper options, with pkg-help for additional information.
- Make separate plist for dri for the different versions, the combined plist
  was headache inducing.
- Add "workaround" patches to allow clang to build the dri port on i386 [1].
  USE_GCC is now only needed for 8.x.
- Add gbm port and USE_GL switch for it.

PR:		192286 [1]
Submitted by:	Carlos Jacobo Puga Medina [1]
Approved by:	portmgr (bapt@)
In collaberation with:	dumbbell@
Obtained from:	xorg-dev

Fix the PORTREVISION bump for the lang/gcc update that went badly for
ports (x11-drivers plus graphics/libGL plus x11-servers/xorg-server)
that handle PORTREVISION in a creative manner hardly lending itself
to any form of automated bumping.

PR:		192025
Reported by:	Scott Allendorf <scott-allendorf@uiowa.edu>

Update the default version of GCC in the Ports Collection from GCC 4.7.4
to GCC 4.8.3.

Part II, Bump PORTREVISIONs.

PR:		192025
Tested by:	antoine (-exp runs)
Approved by:	portmgr (implicit)

Catch up with recent MASTERSITE changes.

Move the ARCH = i386 check to bsd.mesalib.mk so it applies to all
Mesa ports. This will unbreak libglapi/libGL/libglesv2 on i386.

This was probably exposed by when the libglapi port was added.

graphics/libGL: Improve gallium patches to unbreak DragonFly

Some dependent ports are now building Gallium by default.  This never
build on DragonFly before so the ports broke.  Add DragonFly macro
to existing patches and add one new patch to restore DF builds.

Approved by:	portmgr (bapt)

N-i-c-o on #freebsd-fr reported that dri.pc doesn't exist in the stage
directory on ARM. Thus, calling rm(1) on this non-existing file fails.
Passing "-f" to rm(1) fixes the problem.

Move the same commands which are executed in both branches of the "if
(WITH_NEW_XORG)" block, move them outside of it.

Obtained from:	xorg-dev repo

Enable shared libglapi library and make a port for it. It is used by libGL
 and libglesv2. This fixes undefined symbol issues in libglesv2.
Clean up stagedir of unwanted files/directories, so check-plist passes.
Switch logic and always build gallium support in graphics/dri on i386 and
 amd64. Gallium is used for Radeon HD 5000+ support.

Use USES=tar:bzip2
Under WITH_NEW_XORG:
Add patch to remove some dependencies for aclocal.m4 which are absent.
 This allows the removal of USE_AUTOTOOLS, REAPPLY_PATCHES and pre-configure
 target.
Add INSTALL_TARGET=install-strip to strip libraries.
USES=libtool:keepla
Fix a /use typo with /usr in post-patch.

Bump PORTREVISION for the libtool and libglapi changes.

Submitted by:	tijl@ (libtool and autotools changes)
Obtained from:	xorg-dev repo (libglapi and gallium changes)

Convert all :U to :tu and :L to :tl

Since FreeBSD 8.4 and FreeBSD 9.1 make(1) do support :tu and :tl as a
replacement for :U and :L (which has been marked as deprecated)

bmake which is the default on FreeBSD 10+ only support by default
:tu/:tl a hack has been added at the time to support :U and :L to ease
migration. This hack is now not necessary anymore

Note that this makes the ports tree incompatible with make(1) from
FreeBSD 8.3 or earlier

With hat:	portmgr

The FreeBSD x11@ and graphics team proudly presents
a zeising, kwm production, with help from dumbbell, bdrewery:

NEW XORG ON FREEBSD 9-STABLE AND 10-STABLE

This update switches over to use the new xorg stack by default on FreeBSD 9
and 10 stable, on osversions where vt(9) is available.
It is still possible to use the old stack by specifying WITHOUT_NEW_XORG in
/etc/make.conf .
FreeBSD 8-STABLE and released versions of FreeBSD still use
the old version.
A package repository with binary packages for new xorg will
be available soon.

This patch also contains updates of libxcb and related ports, pixman, as well

- Fix build with stagedir support by removing leftovers

Discussed/Reviewed by:	bdrewery/antoine

Add a mirror to avoid failing on clusters

make, make -V MAINTAINER output the correct value again.

Fix graphics/dri on ia64.

Please note that WITH_NEW_XORG isn't tested due to other issues.

Submitted by:	marcel@

Unbreak build with global unset NLS.

Update to 9.1.7.

Stagify, abuse stage dir and plist to only install files we want to install.
So we don't have to do complex do-install anymore, yay.

For the WITH_GALLIUM option we don't need llvm at run-time.

Obtained from:	xorg-dev repo

Unbreak WITH_NEW_XORG patch stage.

 - Fix the usage of 'python' to get rid of the implicit lang/python
   dependency in the mesa ports

Approved by:	x11@ (via kwm@)

The FreeBSD graphics/x11 team proudly presents
a kwm, zeising production:

MESA 9.1.6

Starring:
Mesa 9.1.6, including libGL, libGLU and dri (new xorg only)
Addition of libEGL and libglesv2
KMS support for ATI graphics cards in 10-current (new xorg only)
Improved sparc64 support for new xorg. [1]
pixman 0.30.2, including shlib bump and portrevision bumps
libX11 1.6.2
Make absolute pointing devices work with x11-drivers/xf86-input-mouse
x11-drivers/xf86-video-ati 7.2.0 for 10-current (KMS aware ati driver)

Add NO_STAGE all over the place in preparation for the staging support (cat:
graphics)

Do not overwrite any existing USES that breaks graphics/dri defining
USES=pkgconfig

- Fix Mesa builds by adding lang/python, since it does not support
  setting an explicit Python version as build dependency

- Remove MAKE_JOBS_SAFE variable

Approved by:	portmgr (bdrewery)

Add a maintainer

Obtained from:	xorg development repo

Fix security issues in xorg client libraries.
Most libraries were updated to newer versions, in some cases patches
were backported instead.

Most notably, x11/libX11 was updated to 1.6.0

Security:	CVE-2013-1981
		CVE-2013-1982
		CVE-2013-1983
		CVE-2013-1984
		CVE-2013-1985
		CVE-2013-1986
		CVE-2013-1987
		CVE-2013-1988
		CVE-2013-1989

The FreeBSD x11 team proudly presents
an zeising, kwm, miwi, bapt, eadler production:

Xorg 7.7

Starring:
xserver 1.12.4 (new xorg only)
Mesa 8.0.4, including libGL, libGLU and dri (new xorg only)
libX11 1.5.0
libxcb 1.9
libdrm 2.4.42 (new xorg only)
freeglut 2.8.1
Also starring:
Updates to drivers and other libraries and utilities

Make sure bmake respect :U and :L as it used to work in make(1)

Convert g* to USES=pkgconfig

Unbreak: Switch to USES=bison to pick up dependency on bison.

Obtained from:	xorg development repo

- Fix logic error which caused the gallium-intel driver to be always disabled
[1]
- Make it possible to choose which DRI drivers will be built [2]

PR:		ports/174725 [1]
PR:		ports/154651 [2]
Submitted by:	John Marino <draco@marino.st> [1]
Submitted by:	bf [2]
Reviewed by:	kwm [2]

Without a build dep on pkgconf, configure fails

- Use PTHREAD_LIBS instead of -lpthread

PR:		ports/170506
Submitted by:	Jason E. Hale <bsdkaffee@gmail.com>

After a report of an error, mark graphics/libGL as not MAKE_JOBS_SAFE

PR:		ports/162412
Submitted by:	4720@hushmail.com
Reviewed by:	zeising

Solve libGL.so and libglx.so conflict situation between libGL, xorg-server and
the nvidia-driver. Install the libraries in port specific directories.
Use pkg-install and pkg-deinstall scripts to update the hardlinks to the
default locations of these files.

While here clean up some @dirrmtry lines in xorg-server plist for directories
that aren.t created by xorg-server.

Motivator:	pkgng
Inspiration:	irc, freebsd-x11@ mailinglist discussion (sorry can't find it
		anymore to give credit the people)
Reviewed by:	danfe@ (for nvidia parts), bapt@
Approved by:	danfe@ (for nvidia parts)
With hat:	x11@

Switch from libglut to freeglut and retire libglut. Libglut hasn't been
developed in years and has been dropped from the MESA 8.0 distribution.
Freeglut is a rewrite of glut and is actively developed and is used by
many linux distributions instead of libglut.

Bump all ports that directly depend on libglut because of the shlib version
change.

There are some extra items in this patch.

*) Because freeglut doesn't have the same dependancies as libglut, some ports
	need extra dependencies added to USE_XORG to make them build.
*) Mark graphics/f90gl broken, f90gl depends on a header that is only shipped
	with libglut.
*) Remove option for libglut/freeglut selection in games/cake, only freeglut
	remains now.
*) While here fix a png related build issue games/vegastrike.

Thanks to miwi for running the exp-run.

Approved by:	portmgr (miwi)

Collaboration with:	zeising@
Obtained from:	xorg-dev staging area.

Attempt to fix build of dri, libGL, and libdrm on tier-2 archs.

PR:		ports/169874
Submitted by:	marius, linimon
Tested on:	amd64, arm, i386, powerpc, sparc
Thanks to:	bz, andyt

- Unbreak build with clang

PR:             168902
Submitted by:   dim@
Tested by:      O. Hartmann" <ohartman@zedat.fu-berlin.de>

- Please welcome Xorg 7.5.2

       The Xorg Team is pleased to announce the next round of Xorg updates.
       The team created a new flag called WITH_NEW_XORG that users can include
       in /etc/make.conf. This was created for the intel KMS work being done
       althouthough It probably works for other chips. Unfortunately, the intel
       KMS driver will only work on FreeBSD 9(RELENG|STABLE) or 10/HEAD users.
       Older version of FreeBSD will not be supported. Intel users will need
       to patch their source manually with Konstantin?s KMS kernel patch to get
       the newer chips to work. Please carefully read UPDATING entry.

Changes:

        - libdrm 2.4.31 (including KMS support)
        - mesa 7.11.2
        - xorg-server 1.10.6
        - a lot of new Graphic Drivers.

    I would like to thank:

         Koop Mast
         Eitan Adler
         Niclas Zeising
         and all helpers and testers from x11@.

- Add LDFLAGS to CONFIGURE_ENV and MAKE_ENV (as it was done with LDFLAGS)
- Fix all ports that add {CPP,LD}FLAGS to *_ENV to modify flags instead

PR:             157936
Submitted by:   myself
Exp-runs by:    pav
Approved by:    pav

-remove MD5

Weak the patch so clang can build this on amd64.

Submitted by:   dim@

- Please welcome Xorg 7.5.1

The X-Server has been patched to the latest 1.7.X series, drivers
and fonts have been updated to the latest versions. This update includes
some components from Xorg 7.6 with a lot of improvements, and it seems
that the performance is much better than the old version. Also this
Update fix build issues with clang and binutils 2.17.50 in current,
remove 6.X gruft and de-author pkg-descr.

I would like to thank:

        Beat Gaetzi
        Dima Panov
        Koop Mast
        Eitan Adler
        and all Testers.

PR:             ports/147646
                ports/148035
                ports/148744
                ports/150223
                ports/152889
                ports/154457

Fix make install; make deinstall install

PR:             146184
Submitted by:   Anonymous <swell.k@gmail.com>

Unbreak the Mesa3D 7.4.4 build for powerpc and sparc64 after the 7.6.1
integration.

Approved by:    rnoland

Simplify reference to bsd.mesalib.mk.

Approved by:    maintainer (rnoland via x11)
Feature safe:   yes

Limited Update to Mesa3D 7.6.1 and libdrm 2.4.17.

[MEMO]
In this commit, no version changed.  But if you put
'WITHOUT_NOUVEAU' on /etc/make.conf, you can use
new version of Mesa3D and libdrm.

Discussed with: rnoland on freebsd-ports/freebsd-x11.

- Switch SourceForge ports to the new File Release System: categories starting
with G

Update to 7.4.4

Update to 7.4.3

This is a bug fix release.

- Make following ports MAKE_JOBS_SAFE:

graphics/dri
graphics/libGL
graphics/libGLU
graphics/libGLw
graphics/libglut
graphics/mesa-demos

PR:             133025
Submitted by:   Anonymous <swell.k@gmail.com>
Oked:           rnoland

Update to Mesa release 7.4.2

Update to 7.4.1

Re-enable DRI on powerpc and sparc64, mainly in order to fix
packaging.

Approved by:    rnoland

Update the Mesa ports to 7.4

PR:             133167
Submitted by:   Anonymous <swell.k@gmail.com>

Make libGL bring in dri2proto. This should fix a few failures.

Make graphics/libGL/bsd.mesalib.mk play nicer with its slave port
graphics/libglut and vice versa.

Hat:    portmgr

Fix pkg-plist

Reported by:    barbara <barbara.xxx1975@libero.it>
Approved by:    garga (mentor, implicit)

Add dependency on dri2proto to the rest of the mesa ports

Approved by:    garga (mentor, implicit)