Remove WWW entries moved into port Makefiles

Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.

This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.

Approved by:		portmgr (tcberner)

Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.

graphics: remove 'Created by' lines

A big Thank You to the original contributors of these ports:

  *  "Waitman Gobble" <uzimac@da3m0n8t3r.com>
  *  Aaron Dalton <aaron@FreeBSD.org>
  *  Abel Chow <ozsanh45vds001@sneakemail.com>
  *  Adam Weinberger <adamw@FreeBSD.org>
  *  Ade Lovett <ade@FreeBSD.org>
  *  Ade Lovett <ade@lovett.com>
  *  Akinori MUSHA aka knu <knu@idaemons.org>
  *  Aldis Berjoza <aldis@bsdroot.lv>
  *  Alex Hayward <xelah@xelah.com>
  *  Alex Ivasyuv <siegerstein@pochta.ru>
  *  Alex Samorukov <samm@os2.kiev.ua>

*/*: Remove redundant '-[0-9]*' from CONFLICTS

The conflict checks compare the patterns first against the package
names without version (as reported by "pkg query "%n"), then - if
there was no match - agsinst the full package names including the
version (as reported by "pkg query "%n-%v").

Many CONFLICTS definitions used patterns like "bash-[0-9]*" to filter
for the bash package in any version. But that pattern is functionally
identical with just "bash".

Approved by:	portmgr (blanket)

Remove # $FreeBSD$ from Makefiles.

- Add LICENSE
- Update WWW

Approved by:	portmgr blanket

Remove libart_lgpl_2.so.5 compatibility link that was added in r374303 to
prevent massive PORTREVISION bumps.  Bump dependent ports that have not
been bumped since.

Do not use post-stage.  Use post-install instead.

The only reason to use post-stage is because the port needs to do
"things" at a later time, like some plist manipulation.
While there, fold post-install in do-install targets when they are
defined.

PR:		214780
Submitted by:	mat
Exp-run by:	antoine
Sponsored by:	Absolight

- Fix trailing whitespace in pkg-descrs, categories [g-n]*

Approved by:	portmgr blanket

Replace USES=libtool:oldver with USES=libtool or USES=libtool:keepla in
the 32 ports that still use it.  Bump PORTREVISION on their dependent
ports except the ones that depend on these:

audio/libogg
audio/libvorbis
devel/pcre
ftp/curl
graphics/jpeg
graphics/libart_lgpl
graphics/tiff
textproc/expat2
textproc/libxslt

In these cases the same trick as in the recent gettext update is used.

Cleanup plist

- Switch to USES=libtool,tar

Approved by:	kwm

Remove NO_STAGE to ports natively stage ready shown by a FORCE_STAGE exp-run

Exp-run by:	bdrewery

Add NO_STAGE all over the place in preparation for the staging support (cat:
graphics)

This changes almost all the "gnomehack" only USE_GNOME cases to USES= pathfix.

If a port used other USE_GNOME items it was untouched.
The ports that used other USES were fixed by hand.

PR:		ports/177081
Reviewed by:	bapt
Approved by:	portmgr (miwi)

* Update the glib to 2.34.3 and gtk20 to 2.24.17 and gtk30 to 3.6.4 which
  are the latest stable releases.
* Update vala to the newest stable release 0.18.1, also update a few ports
  in the gtk/gnome stack.
* The c++ bindings ports for glib, atk, gconf, etc, have now USE_GNOME toggles.
* Remove pkg-config run depends from glib20 and freetype2. This doesn't
  eliminate pkg-config run dependency completely, a second phase is needed
  and is planned.
* Support for .:run. and .:build. for USE_GNOME components was added.
  Currently only libxml2 and libxslt support this mechanism.
* Updates of the telepathy stack and empathy.
* Trim makefile headers, convert ports to new options, trim off library
  versions for some ports.
* Fix other ports so they build with the new glib version.

Thanks to miwi and crees for helping out with some exp-runs.
Approved by:	portmgr (miwi & bapt)
Obtained from:	gnome team repo

Remove USE_GNOME=gnometarget from ports. It has been a empty keyword since
mid 2008.

PR:             ports/159624
Submitted by:   Ruslan Mahmatkhanov <cvs-src@yandex.ru>

-remove MD5

Sync to new bsd.autotools.mk

Presenting GNOME 2.30.1 for FreeBSD. The offical release notes for this
release can be found at http://library.gnome.org/misc/release-notes/2.30/ .

This release brings initial PackageKit support, Upower (replaces power
management part of hal), cuse4bsd integration with HAL and cheese, and a
faster Evolution.

Sadly GNOME 2.30.x will be the last release with FreeBSD 6.X support. This
will also be the last of the 2.x releases. The next release will be the
highly-anticipated GNOME 3.0 which will bring with it a new UI experience.

Currently, there are a few bugs with GNOME 2.30 that may be of note for our
users. Be sure to consult the UPGRADING note or the 2.30 upgrade FAQ at
http://www.freebsd.org/gnome/docs/faq230.html for specific upgrading
instructions, and the up-to-date list of known issues.

-Repocopy devel/libtool15 -> libtool22 and libltdl15 -> libltdl22.
-Update libtool and libltdl to 2.2.6a.
-Remove devel/libtool15 and devel/libltdl15.
-Fix ports build with libtool22/libltdl22.
-Bump ports that depend on libltdl22 due to shared library version change.
-Explain what to do update in the UPDATING.

It has been tested with GNOME2, XFCE4, KDE3, KDE4 and other many wm/desktop
and applications in the runtime.

With help:      marcus and kwm
Pointyhat-exp:  a few times by pav
Tested by:      pgollucci, "Romain Tartière" <romain@blogreen.org>, and
                a few MarcusCom CVS users. Also, I might have missed a few.
Repocopy by:    marcus
Approved by:    portmgr

- Mark MAKE_JOBS_UNSAFE

Submitted by:   David Naylor <naylor.b.david@gmail.com>

- Use GNOME macro instead of ${MASTER_SITE_GNOME}, remove
  MASTER_SITE_SUBDIR when possible.

PR:             ports/125243
Submitted by:   pgollucci
Reworked by:    myself
Tested on:      pointyhat exp-run (pav)

Update to 2.3.20.

Fix checksum

One miscommunication and a resulting avoidable PORTEPOCH bump later ;-(

Add a patch:

* art_misc.h: Fix header when included in C++.

This fixes building kdelibs.

Approved by:   mezz for gnome@
Obtained from: GNOME SVN

- Back down to 2.3.18 for a API breakage in kdelibs

Requested by:   lofi

Update to 2.3.19

Update to 2.3.18.

Use libtool port instead of included one to avoid objformat a.out botch

INSTALLS_SHLIB -> USE_LDCONFIG.

Found by:       portlint (cports.sh)

- Renamed port graphics/libart_lgpl2 -> graphics/libart_lgpl