| Port details |
- py-pyprind Python Progress Bar and Percent Indicator Utility
- 2.11.3_1 misc
 =2      2.11.3_1Version of this port present on the latest quarterly branch. - Maintainer: sunpoet@FreeBSD.org
- Port Added: 2016-06-30 09:14:09
- Last Update: 2024-05-13 14:04:02
- Commit Hash: b62faa9
- People watching this port, also watch:: jdictionary, py311-Automat, py311-python-gdsii, py311-PyOpenGL, p5-Sane
- Also Listed In: python
- License: BSD3CLAUSE
- WWW:
- https://github.com/rasbt/pyprind
- Description:
- The PyPrind (Python Progress Indicator) module provides a progress bar and a
percentage indicator object that let you track the progress of a loop structure
or other iterative computation. Typical applications include the processing of
large data sets to provide an intuitive estimate at runtime about the progress
of the computation.
  ¦  ¦  ¦  ¦ 
- Manual pages:
- FreshPorts has no man page information for this port.
- pkg-plist: as obtained via:
make generate-plist - There is no configure plist information for this port.
- Dependency lines:
-
- ${PYTHON_PKGNAMEPREFIX}pyprind>0:misc/py-pyprind@${PY_FLAVOR}
- To install the port:
- cd /usr/ports/misc/py-pyprind/ && make install clean
- To add the package, run one of these commands:
- pkg install misc/py-pyprind
- pkg install py39-pyprind
NOTE: If this package has multiple flavors (see below), then use one of them instead of the name specified above.
NOTE: This is a Python port. Instead of py39-pyprind listed in the above command, you can pick from the names under the Packages section.- PKGNAME: py39-pyprind
- Package flavors (<flavor>: <package>)
- distinfo:
- TIMESTAMP = 1619198557
SHA256 (PyPrind-2.11.3.tar.gz) = e37dcab6e1a9c8e0a7f0fce65fde7a79e2deda1c75aa015910a49e2137b54cbf
SIZE (PyPrind-2.11.3.tar.gz) = 11632
Packages (timestamps in pop-ups are UTC):
- Dependencies
- NOTE: FreshPorts displays only information on required and default dependencies. Optional dependencies are not covered.
- Build dependencies:
-
- py39-setuptools>=0 : devel/py-setuptools@py39
- py39-wheel>=0 : devel/py-wheel@py39
- python3.9 : lang/python39
- py39-build>=0 : devel/py-build@py39
- py39-installer>=0 : devel/py-installer@py39
- Test dependencies:
-
- py39-psutil>=3.2.0 : sysutils/py-psutil@py39
- py39-nose>=0 : devel/py-nose@py39
- python3.9 : lang/python39
- Runtime dependencies:
-
- python3.9 : lang/python39
- This port is required by:
- for Run
-
- finance/py-bt
- graphics/rapid-photo-downloader
Configuration Options:- ===> The following configuration options are available for py39-pyprind-2.11.3_1:
PSUTIL=off: Support monitoring CPU and memory usage
===> Use 'make config' to modify these settings
- Options name:
- misc_py-pyprind
- USES:
- python
- FreshPorts was unable to extract/find any pkg message
- Master Sites:
|
| Commit History - (may be incomplete: for full details, see links to repositories near top of page) |
| Commit | Credits | Log message |
|---|
2.11.3_1
13 May 2024 14:04:02
 |
Po-Chuan Hsieh (sunpoet) |
misc/py-pyprind: Convert to USE_PYTHON=pep517
- Bump PORTREVISION for package change |
2.11.3
27 Jun 2023 19:34:34
|
Rene Ladan (rene) |
all: remove explicit versions in USES=python for "3.x+"
The logic in USES=python will automatically convert this to 3.8+ by
itself.
Adjust two ports that only had Python 3.7 mentioned but build fine
on Python 3.8 too.
finance/quickfix: mark BROKEN with PYTHON
libtool: compile: c++ -DHAVE_CONFIG_H -I. -I../.. -I -I. -I.. -I../.. -I../C++
-DLIBICONV_PLUG -DPYTHON_MAJOR_VERSION=3 -Wno-unused-variable
-Wno-maybe-uninitialized -O2 -pipe -DLIBICONV_PLUG -fstack-protector-strong
-fno-strict-aliasing -DLIBICONV_PLUG -Wall -ansi
-Wno-unused-command-line-argument -Wpointer-arith -Wwrite-strings
-Wno-overloaded-virtual -Wno-deprecated-declarations -Wno-deprecated -std=c++0x
-MT _quickfix_la-QuickfixPython.lo -MD -MP -MF
.deps/_quickfix_la-QuickfixPython.Tpo -c QuickfixPython.cpp -fPIC -DPIC -o
.libs/_quickfix_la-QuickfixPython.o
warning: unknown warning option '-Wno-maybe-uninitialized'; did you mean
'-Wno-uninitialized'? [-Wunknown-warning-option]
QuickfixPython.cpp:175:11: fatal error: 'Python.h' file not found
^~~~~~~~~~
1 warning and 1 error generated.
Reviewed by: portmgr, vishwin, yuri
Differential Revision: <https://reviews.freebsd.org/D40568> |
2.11.3
11 Jan 2023 15:58:34
|
Dmitry Marakasov (amdmi3) |
*/*: rename CHEESESHOP to PYPI in MASTER_SITES
PR: 267994
Differential revision: D37518
Approved by: bapt |
07 Sep 2022 21:58:51
|
Stefan Eßer (se) |
Remove WWW entries moved into port Makefiles
Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.
This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.
Approved by: portmgr (tcberner) |
2.11.3
07 Sep 2022 21:10:59
|
Stefan Eßer (se) |
Add WWW entries to port Makefiles
It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.
Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.
There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.
(Only the first 15 lines of the commit message are shown above  ) |
2.11.3
03 Jun 2022 16:57:02
|
Po-Chuan Hsieh (sunpoet) |
misc/py-pyprind: Convert to USE_PYTHON=nose |
2.11.3
29 Apr 2021 14:23:59
|
Po-Chuan Hsieh (sunpoet) |
misc/py-pyprind: Add CATEGORIES=python |
2.11.3
25 Apr 2021 20:35:32
|
Po-Chuan Hsieh (sunpoet) |
misc/py-pyprind: Update to 2.11.3
Changes: https://github.com/rasbt/pyprind/releases
https://github.com/rasbt/pyprind/blob/master/CHANGELOG.md |
2.11.2
07 Apr 2021 08:09:01
|
Mathieu Arnold (mat) |
One more small cleanup, forgotten yesterday.
Reported by: lwhsu |
2.11.2
06 Apr 2021 14:31:07
|
Mathieu Arnold (mat) |
Remove # $FreeBSD$ from Makefiles. |
2.11.2
28 Dec 2020 23:02:15
 |
antoine |
Drop python 2.7 support from a few ports
With hat: portmgr |
2.11.2
27 Feb 2020 21:26:58
|
sunpoet |
Reset maintainership
- While I'm here, take maintainership
PR: 244455
Submitted by: Neel Chauhan <neel@neelc.org> (maintainer) |
2.11.2
20 Jun 2018 17:05:44
|
mat |
Use PY_FLAVOR for dependencies.
FLAVOR is the current port's flavor, it should not be used outside of
this scope.
Sponsored by: Absolight |
2.11.2
26 Feb 2018 22:33:20
|
sunpoet |
Update to 2.11.2
- While I'm here, fix version requirement of *_DEPENDS
Changes: https://github.com/rasbt/pyprind/releases
https://github.com/rasbt/pyprind/blob/master/CHANGELOG.md
PR: 226201
Submitted by: Neel Chauhan <neel@neelc.org> (maintainer) |
2.11.1
30 Dec 2017 00:15:30
|
sunpoet |
Fix WWW
Approved by: portmgr (blanket) |
2.11.1
30 Nov 2017 15:50:34
 |
mat |
Convert Python ports to FLAVORS.
Ports using USE_PYTHON=distutils are now flavored. They will
automatically get flavors (py27, py34, py35, py36) depending on what
versions they support.
There is also a USE_PYTHON=flavors for ports that do not use distutils
but need FLAVORS to be set. A USE_PYTHON=noflavors can be set if
using distutils but flavors are not wanted.
A new USE_PYTHON=optsuffix that will add PYTHON_PKGNAMESUFFIX has been
added to cope with Python ports that did not have the Python
PKGNAMEPREFIX but are flavored.
USES=python now also exports a PY_FLAVOR variable that contains the (Only the first 15 lines of the commit message are shown above ) |
2.11.1
06 Jun 2017 01:19:04
|
dbaio |
misc/py-pyprind: Update to 2.11.1
Changes: https://github.com/rasbt/pyprind/blob/master/CHANGELOG.md#version-2111
PR: 219736
Submitted by: Neel Chauhan <neel@neelc.org> (maintainer)
Approved by: garga (mentor)
Differential Revision: https://reviews.freebsd.org/D11045 |
2.11.0
04 May 2017 02:49:28
|
wen |
- Update to 2.11.0
PR: 219041
Submitted by: neel@neelc.org(maintainer) |
2.10.0
30 Mar 2017 11:34:40
|
cpm |
- Update to 2.10.0
- While here, fix 'make test'
PR: 217523
Submitted by: Neel Chauhan <neel@neelc.org> (maintainer) |
2.9.9
09 Sep 2016 14:09:52
|
amdmi3 |
- Update to 2.9.9
- While here, switch to new test framework
PR: 212511
Submitted by: neel@neelc.org (maintainer) |
2.9.8
04 Sep 2016 09:54:56
|
antoine |
Remove bogus DISTVERSIONPREFIX
PR: 205762 |
2.9.8
30 Jun 2016 09:14:00
|
koobs |
[NEW] misc/py-pyprind: Python Progress Bar and Percent Indicator Utility
The PyPrind (Python Progress Indicator) module provides a progress bar
and a percentage indicator object that let you track the progress of a
loop structure or other iterative computation. Typical applications
include the processing of large data sets to provide an intuitive
estimate at runtime about the progress of the computation.
WWW: https://www.github.com/rasbt/pyprind
PR: 207758
Submitted by: Neel Chauhan <neel neelc org> |
As an Amazon Associate I earn from qualifying purchases.