Remove expired ports:
print/apsfilter: Mostly unmaintained since 2015 and depends on expired ports
2018-09-30 print/hpijs: Unsupported since 2005, please migrate to print/hplip
2018-08-15 archivers/freeze: unknown license

Switch default version of samba to 4.7
Samba 4.6 will be discontinued in a few weeks

Reviewed by:	mat
Differential Revision:	https://reviews.freebsd.org/D16904

Change default version of samba from 4.4 to 4.6

Reviewed by:	mat
With hat:	portmgr
Differential Revision:	https://reviews.freebsd.org/D13529

Switch default version of samba from 4.3 to 4.4

With hat:	portmgr
Differential Revision:	https://reviews.freebsd.org/D10131

- Add USES=samba to handle dependency on samba
  Valid ARGS:  build, env, lib, run (default: build,run)
- Add SAMBA_DEFAULT to bsd.default-versions.mk (default: 4.3)
- Remove obsolete samba36 ports
- Modify samba4x ports to install libsmbclient
- Convert the ports tree to USES=samba

Reviewed by:	mat
Differential Revision:	https://reviews.freebsd.org/D8919

Revert r421265. hplip is not a drop-in replacement for hpijs.

Pointy hat to:	cy (yours truly)
Discovered by:	cy

${RM} already has -f.

PR:		213570
Submitted by:	mat
Exp-run by:	antoine
Sponsored by:	Absolight

Whatever you do, ${PORTSDIR} always creeps in depends.

Sponsored by:	Absolight

Mark BROKEN: wrong run depends

===>   apsfilter-7.2.8_17 depends on executable: hpijs - not found

Reported by:	pkg-fallout

Implement hpijs/hplip dependency option.

Approved by:	hrs@
Differential Revision:	D2628

multimedia ... sysutils: Remove redundant dependency on unzip

A dependency on unzip will never be registered since unzip is available
on all supported platforms (since FreeBSD 8.0).
Note that it's pulled in by a non-default option.

Approved by:	infrastructure blanket (removal of redundant deps)

- Fix trailing whitespace in pkg-messages

Approved by:	portmgr blanket

Remove ${PORTSDIR}/ from dependencies, categories m, n, o, and p.

With hat:	portmgr
Sponsored by:	Absolight

Make print/ghostscript9-agpl-base the default Ghostscript port.  Upstream
changed the license to the AGPL 3 in version 9.07 so print/ghostscript9-base
is stuck at 9.06 which is almost 4 years old now.

Fix the logic in Uses/ghostscript.mk so "agpl" is treated as a real version
on its own instead of as a variant of other versions.

Fix print/ghostscript9-agpl-base to install eps2write.

Update math/asymptote to 2.37 to support newer Ghostscript.

PR:		208159
Exp-run by:	antoine
Approved by:	portmgr (antoine)

- Split ghostscript into X11-independent and -dependent parts:

 * print/ghostscript{7,8,9,9-agpl}-base

   Installs Ghostscript binary, libgs, and related files.
   These ports do not depend on X11 libraries (i.e. x11* devices
   are not available).  USES=ghostscript will set dependency on
   one of them depending on GHOSTSCRIPT_DEFAULT.

   The default device is set to "display" or "bbox".

 * print/ghostscript{7,8,9,9-agpl}-x11

   Installs a shared library which provides X11 support to
   the installed Ghostscript binaries.  x11* devices will be

Fix index after ghostscript USES addition.

Allow USES=ghostscript to select which port we need.
Manualy set WITHOUT_X11 in the !X11 case since USES=ghostscript
doesn't check PORT_OPTIONS for set/unset of the X11 option.

Cleanup plist

Switch to use rpm 4 as the default rpm

Support stage

Fix properties on pkg-plist

Add NO_STAGE all over the place in preparation for the staging support (cat:
print)

Remove sk2ps from dependency.

Fix typos.

Spotted by:	Scott Allendorf

Merge print/html2ps-{a4,letter} to print/html2ps.

- Add LICENSE.
- Convert script/configure and Makefile.inc to OPTIONS_DEFINE.
- Add DOCS option and use PORTDOCS.
- Trim lengthy pkg-descr.

Fix psutils-* and a2ps-* dependency.

Spotted by:	Scott Allendorf

Merge print/psutils-a4 and print/psutils-letter into a single port
print/psutils.  The default paper size in the programs can be set via
libpaper ($PAPERSIZE or etc/papersize configuration file).

Style: tab -> space.

Most contributors copy an existing port when writing their own so reduce the
number of bad examples in the tree.

Update ports that refer to net/samba34 to use newer net/samba36

Fix typos and make small modifications in COMMENT (according to Porter's
Handbook)

Approved by:	portmgr@ (implicit)

- update png to 1.5.10

- Kick MD5 Support

- Add optional SAMBA_PORT var and point it as default to net/samba34
- Bump necessary PORTREVISION

- update to 1.4.1
Reviewed by:    exp8 run on pointyhat
Supported by:   miwi

- update to jpeg-8

Fix dependency broken due to acroread7 removal.

andreas' commit bit has been taken in for safekeeping.

Bump portrevision due to upgrade of devel/gettext.

The affected ports are the ones with gettext as a run-dependency
according to ports/INDEX-7 (5007 of them) and the ones with USE_GETTEXT
in Makefile (29 of them).

PR:             ports/124340
Submitted by:   edwin@
Approved by:    portmgr (pav)

- Remove unneeded dependency from gtk12/gtk20 [1]
- Remove USE_XLIB/USE_X_PREFIX/USE_XPM in favor of USE_XORG
- Remove X11BASE support in favor of LOCALBASE or PREFIX
- Use USE_LDCONFIG instead of INSTALLS_SHLIB
- Remove unneeded USE_GCC 3.4+

Thanks to all Helpers:
        Dmitry Marakasov, Chess Griffin, beech@, dinoex, rafan, gahr,
        ehaupt, nox, itetcu, flz, pav

PR:             116263
Tested on:      pointyhat
Approved by:    portmgr (pav)

Remove support for OSVERSION < 5

Remove print/ghostscript-afpl as it has been replaced by print/ghostscript-gpl
since version 8.57. The leading ghostscript is the -gpl one.

Approved by:    portmgr (pav)

"make describe" failed in top-level "make index"
since ports configure script adds "-nox11" suffix
even when ${GHOSTSCRIPT_PORT} is already "ghostscript-gpl-nox11".

Submitted by:   G. Paul Ziemba <paul@treehouse.napa.ca.us>
Reviewed by:    me

Depend on graphics/tgif port not tgif-nls.
Bumped portrevision

PR:             113549
Submitted by:   Geraud CONTINSOUZAS

- Welcome X.org 7.2 \o/.
- Set X11BASE to ${LOCALBASE} for recent ${OSVERSION}.
- Bump PORTREVISION for ports intalling files in ${X11BASE}.

. drop variable RUN_DEPENDS for shells/bash2;
. do not bump PORTREVISION since this dependency is not default.

PR:             108627
Submitted by:   bsam (me)
Approved by:    andreas (maintainer timeout -- 2 weeks)

Chase net/samba to net/samba3 in preparation for removal of the former.

Update to new version 7.2.8
New features: can play audio files.
lpd then acts like a jukebox.
Remote Audio printing/playing is at experimental stage (untested).
Theoretically it should be possible that multiple print clients
feed the central print server with sound card with audio files.

fix acroread dependency after recent changes to the acrobat reader's
ports structure

PR:             ports/99354
Submitted by:   Kostik Belousov <kib@FreeBSD.org>

It no use to make it build OK on tinderbox if you commit an older file.
Unbreak make install: list pkg-message in SUB_FILES and @${CAT} ${PKGMESSAGE}.

Submitted by:   Scott Allendorf <scott-allendorf@uiowa.edu>
Approved by:    maintianer (andreas@, implicit - out of touch for the moment)

- depend on net/samba3 instead of old, forbiden net/samba [1] [2]
- pet portlint [3]
- pkg-message -> files/pkg-message.in and add to SUB_LIST [3]
- bump PROTREVISION for depends change [3]

PR:             ports/98456 [1], ports/99066 [2]
Submitted by:   Shaun Amott <shaun@inerd.com> [1],
                Gerard E. Seibert <ges@seibercom.net> [2]
                itetcu (me) [3]
Approved by:    andreas@ (maintainer, implicit because unreachable at the
                moment)

new bugfix release 7.2.7
make spaces possible in printer name (samba)

PR:             90744
Submitted by:   Roman Kurakin <rik at FreeBSD dot org>

SHA256ify

Approved by: krion@

- Remove bzip2 incantations since it has been part of base system since FreeBSD
4.4.

PR:             ports/88984
Submitted by:   edwin
Approved by:    maintainer timeout (2 weeks)

Make apsfilter prefix clean by setting CONFIGURE_ARGS.
Wrongly thought HAS_CONFIGURE variable at least hands over PREFIX.
Bumped port revision.

Submitted by:   pointyhat (kris)

Thanks for the bugreport including fix. Fix was not complete,
I added the missing changes for manual config.

- Depend on acroread7 instead of acroread5.
  Acroread5 is outdated and marked BROKEN due to multiple security issues
  So the port didn't build/install
- changed manual config and batch mode
- portrevision bump

Submitted by:   Antonio Arredondo <aarredon@cs.nmsu.edu>

remove redundant patch which is contained in new apsfilter version

- update to 7.2.6 (bugfixrelease)
- pcl3 and hpdj driver fixes for HP DeskJet550C driver and compatible printer
- fixes port dependency for acroread5

PR:             ports/77405
Submitted by:   John Cochran <jdc@fiawol.org>

- added suggested patch to use bash3 as default dependency for bash
- while being here trimmed COMMENT according to portlint
- providing backward compatibility if needed via WITH_BASH2 make env var
- bumping port revision
- closing 76805

PR:             76805
Submitted by:   Michael C.Shultz <reso3w83@verizon.net>

Chase print/acroread5 to print/acroread

Extra Special Pointy Santa Hat to:      trevor

- the GS_NO_X11 case in configure script needs more work
- no version bump, since last commit only 5 minutes ago

Approved by:    portmgr (implicit)

- cleanup after USE_GHOSTSCRIPT_RUN changes in Makefile
  It has been forgotten to change configure script as well
- bumped port revision since it fixes a bug reported by
  Holger Kipp <h.kipp@eurowings.com>

Approved by:    portmgr (Mark Linimon)

SIZEify (maintainer timeout)

- honour PAPERSIZE variable like in a2ps and psutils ports
- default to letter
- inspired by PR but using a more suitable solution to use the
  environment variable already used by other ports instead by
  using new one (PAPER_SIZE and A4_PAPER)

PR:             48140

- sketch is now called skencil
- fixed run-dependencies
- no revision bump, since this doesn't affect normal port installation
  or package building.

Use the new ghostscript options.

Submitted by:   linimon

Variable GSPORT is recursive.

PR:             60532
Submitted by:   leeym
Approved by:    maintainer timeout (2 weeks)

- typo in make variables, at some places "WITH_GHOSTSCRIPT_AFP1" has been used
  instead of using "WITH_GHOSTSCRIPT_AFPL"
- bumped port revision, because this sanitizes dependencies

Submitted by:    Frank Bartels <knarf@knarf.de>

[PATCH] print/apsfilter: enable choose of ghostscript interpreter

        This patch allows the admin of the machine to choose either
        print/ghostscript-gnu or print/ghostscript-afp1

Please note that the wrong version of this patch (the one with afp1
instead of afpl) had already been applied by andreas@. I've updated
this to fix it.

PR:             ports/54941
Submitted by:   Jens Rehsack <rehsack@liwing.de>

- enable choose of ghostscript interpreter
- change all occurrences of acrobat reader from v4 to v5
- bumped portrevision

To Jens in e-mail:
"Jens, do you take care of the pending PRs ?
Content of PRs sounded to me as if you are waiting for several changes."

PR:             54958 54960 (both pending)
Submitted by:   Jens Rehsack <rehsack@liwing.de>

- use acroread5 port instead of old ancient acroread (v3) for port dependency,
  good suggestion by: ajhar@physics.miami.edu (Dr. Edward Ajhar)
- update apsfilters acroread search order to use acroread5 in the 1st place
- bump PORTREVISION
- tested installation and package-building

Clear moonlight beckons.
Requiem mors pacem pkg-comment,
And be calm ports tree.

E Nomini Patri, E Fili, E Spiritu Sancti.

fix pkg-plist

PR:             46641
Submitted by:   Bjoern A.Zeeb <bzeeb+freebsdports@zabbadoz.net>

- update to 7.2.5
- important bugfixrelease
- unbreaks windows/novell/appletalk remote printing
- explanation: permissions 600 root:daemon
  were too strong for smbclient & Co.'s config files...
- fix: teach SETUP to use 640 root:daemon as default
- If that's still not sufficient, 'hack' SETUP
  and fine tune the new global PASSWD_PROTECT=640 variable.

remove unnecessary patch forgotten in prev. commit
no port revision bump since port was up to now unbuild-/uninstallable
thanks to various people pointing this out

update to new apsfilter version 7.2.4
this is mainly a BUGFIX Release

NEW FEATURES
        - some ijs driver scripts got more differentiation
          concerning options for print quality.
DOCUMENTATION
        - wrong manual reference in apsfilter manpage, changed from
          smbprint(1) to smbclient(1)
        - apsfilter handbook got a path fix and cosmetic changes
        - support for ijs 1.1 and later (prior 1.0 and later)
BUG FIXES
        - driver/stp/escp2-440
        - set traditional umask in SETUP (022) just for the case
          somebodies root account has strange default settings not
          to end up with screwed permissions, that make printing
          impossible.
        - update driver MAPPINGS
CODE IMPROVEMENTS
        - partly cosmetic, get rid of GS_MODEL
        - modified gs_cmnd

backout last change by request of Kris Kenneways mail in -developers

use new PORTCOMMENT

- set umask 022 in SETUP, so that it works under root environment
  with too restricive umask settings like '026'.
- bumped port revision, since this unbreaks installation under
  non-default root environments

Submitted by:   Martin.Kraemer@Fujitsu-Siemens.com

- added needed run dependency
  added dependency to print/hpijs, since the ijs driver isn't automatically
  installed anymore when installing ghostscript
- therefore bumped portrevision

I recommend you to upgrade to this new version
* update to apsfilter 7.2.3
* contains two major bugfixes
  a) printing using newest HP IJS driver is fixed (PR 37085)
     the fix has been taken from other source but PR should be resolved
  b) printing to a remote windows printer via samba is fixed
     there was a nasty typo in the apsfilter script ($SMP_IP -> $SMB_IP)
* other changes
- new gimp-print driver / ijsgimpprint
- add new pretty command to set text-to-PostScript highlight level
- fix "remote copies" parameter to lpr
- clean up template apsfilterrc
* FreeBSD/port related things:
- could close all problems report
- PR 34153: fixed configure script: a permanent runtime dependency
  to bzip2 is inappropriate on FreeBSD systems that have bzip2 in
  the base system.
* For a list of all changes please look at ANNOUNCE and ChangeLog file
        http://www.apsfilter.org/download.html

PR:             34153, 37085

Add USE_SUBMAKE, where it might be necessary.

- new apsfilter version 7.2.2 - bugfix release !   - please upgrade   - updated
pkg-plist to match reality   - tested packaging   Changes:   - replace awk
"duplex" function with psset call   - adjust psnup rotation to various
converters     for landscape mode   - add landscape option to enscript command
line   - introduce IGNORE_LPD_RAW variable to please buggy     spoolers that
send jobs in raw mode   - sanitize ": ${foo:-bar}" to ": ${foo:=bar}"   - make
n{c}print line whitespace-safe   - save return code in global temporary file   -
typo in wmf2eps line   - make apspreview use global "restrictions" file   - get
basedir in SETUP from configure   - protect $foo[bar] contructs from being
expanded     to array elements by zsh   - add "-dPARANOIDSAFER" for gs7.04
(harmless for all     older releases)   - save "rm" and "rp" in SETUP.cfg   -
add some hints w.r.t landscape and n-up in handbook   - remove media types in
scripts for some PCL printers   - be more helpful with "invalid method"   -
LaserJet 4L needs fixed 300dpi   - LN macro in Makefile needs -n switch -- we
must     create a directory link even if one exists already   - add .PHONY
targets in Makefiles   - MAPPING update   - change email address in various
places   new driver scripts:   -  ljet4l, pips/sc70s, pips/sc80s, stp/pcl-2,
stp/pcl-4    

Update apsfilter port to 7.2.1   Important fixes for FreeBSD   Patches from
files subdir went into this new release   General fixes:          - remove
apsfilter installation error when typing "make install"             by using
ln's -f (force) option to overwrite an existing symlink             (just in
case you overwrite another installation).    

Update Prio: high (because of driver and other fixes, see below)    

Update port dependency, if defined APSFILTER_ALL   The interactive script will
be updated later.   Don't bump port revision, since next following commit   will
contain new apsfilter release, that is now in the   queue, before I finished
polishing interactive installartion.   But I didn't want to mix this change and
the new apsfilter   version in one commit.    

unbreak port for -current   Since the `.' seperator has been deprecated for a
while now,   the chown command fails - at least under -current.   Changed his
patch to patch actually SETUP.in and not the   resulting file SETUP after
running configure.    

Update to apsfilter version 7.1.1    

update to apsfilter 7.1.0   - new design: use GNU configure alike script
(without the bloat) for     creating different files (scripts, manpages,
handbook, Makefile).     now paths are 100% matching.   - create portable
Makefile across various platforms   - manpage update, supported file types,
commandline options (lpr -C/-Z),     docu fixes   - some fixes in driver
(hl1250, bjc600/800)    

"You want to make it reference ${LOCALBASE}/bin/bash.  Remember, ports   assume
dependencies are installed in ${LOCALBASE} or ${X11BASE}."   That says it all.  
 

Unluckily FreeBSD's shell isn't able to read from/write to /dev/stdin   and
stdout.   Therefore we have to use bash as shell for /usr/local/bin/aps2file  
program.   Arrange things with patch and pre-configure command, so that this  
port stays prefix-clean.   The patch inserts !!PREFIX!!/bin/bash and configure
configures in   the current PREFIX settings.   I'd whish somebody could fix our
shell to remove the dependency from bash.    

New apsfilter version 7.0.1   - patch-SETUP is included in 7.0.1 (we don't
provide insane defaults anymore)   - support for HPIJS V 1.0 ("IJS" driver)   -
still supporting old HPIJS driver ("HPIJS" driver)   - some more sanity checks
in SETUP (check is print device is character special)   - added bjc800 driver
script, since it differs to bjc600 printer   - format of MAPFILE documented   -
handbook has been updated   - compatible to 7.0.0 version, so old entries and
spooldirs should work     after upgrade has been made    

change default parallel device from lp0 to lpt0    

update apsfilter to new version 7.0, here a short summary,   see ANNOUNCE and
ChangeLog for a complete list:   - supports fully ghostscript7   - enhanced
driver support, hpijs, pips, latest gimp-print, etc ...   - per driver scripts,
where printer manufacturer *could* place     their driver/scripts, the case
structure wasn't scaleable anymore     an led to incomplete support or to large
apsfilter script   - unified command-line options, see handbook   - support for
HARDWARE_COPIES if your printer can print multiple copies     himself   - option
settings can be restricted by the administrator for all printer     or print
queues (maybe to save print costs on color printers ...)   - support for many
new filetypes   - print contens of archives: tar, cpio, ar, zip, zoo ...   -
security: update for duplex print keys   - separate faq has gone, everything is
in the handbook   - error messages can be sent to user now via Cc:   - no bugs
so far ;-)    

- Add patch, update to FAQ and handbook and some driver updates for SETUP   -
place apsfilter distfiles into subdir apsfilter, since name of patchfile    
doesn't contain string apsfilter. On my TODO list for future.   - update prio
for apsfilter user: low (hint: try/test apsfilter-current     from
http://www.apsfilter.org if you are looking for more printer     support and
other goodies)    

the ghostscript ports moved to new naming scheme,   so update configure script
to reflect reality.    

Replace the ghostscript6 dependencies with ghostscript-gnu.    

Conditionalize bzip2 dependencies.    

RUN_DEPENDS on melt for freeze package    

Standartise the way used to disable X11 support in various ports. From now   on
WITHOUT_X11 is the Only True Way[tm].    

update from apsfilter 6.1.0 to 6.1.1   - a duplex printing password fix turned
out incompatibility of     BSD od(1) to other flavours of od(1).   - apsfilter
6.1.1 contains the duplex password fix     + a substitution of od(1) with
hexdump which also seems to be     available on Linux and Solaris.   - no
PORTREVISION dump since we have a new release   - added pkg-message file for
easier handling and addition of     notification to apsfilter *package*     had
to change configure script and Makefile to follow that new     infrastructure.  
- troff notification in dependency to FreeBSD version