print/py-reportlab: Update version 4.1.0=>4.2.0

Changelog: https://hg.reportlab.com/hg-public/reportlab/file/tip/CHANGES.md

print/py-reportlab: Add NO_ARCH

Approved by:	portmgr (blanket)

print/py-reportlab: Update version 3.6.13=>4.1.0

Changelog: https://hg.reportlab.com/hg-public/reportlab/file/tip/CHANGES.md

PR:		277019

all: remove explicit versions in USES=python for "3.x+"

The logic in USES=python will automatically convert this to 3.8+ by
itself.

Adjust two ports that only had Python 3.7 mentioned but build fine
on Python 3.8 too.

finance/quickfix: mark BROKEN with PYTHON

libtool: compile:  c++ -DHAVE_CONFIG_H -I. -I../.. -I -I. -I.. -I../.. -I../C++
-DLIBICONV_PLUG -DPYTHON_MAJOR_VERSION=3 -Wno-unused-variable
-Wno-maybe-uninitialized -O2 -pipe -DLIBICONV_PLUG -fstack-protector-strong
-fno-strict-aliasing -DLIBICONV_PLUG -Wall -ansi
-Wno-unused-command-line-argument -Wpointer-arith -Wwrite-strings
-Wno-overloaded-virtual -Wno-deprecated-declarations -Wno-deprecated -std=c++0x
-MT _quickfix_la-QuickfixPython.lo -MD -MP -MF
.deps/_quickfix_la-QuickfixPython.Tpo -c QuickfixPython.cpp  -fPIC -DPIC -o
.libs/_quickfix_la-QuickfixPython.o
warning: unknown warning option '-Wno-maybe-uninitialized'; did you mean
'-Wno-uninitialized'? [-Wunknown-warning-option]
QuickfixPython.cpp:175:11: fatal error: 'Python.h' file not found
          ^~~~~~~~~~
1 warning and 1 error generated.

Reviewed by:	portmgr, vishwin, yuri
Differential Revision:	<https://reviews.freebsd.org/D40568>

print/py-reportlab: Update version 3.6.12=>3.6.13

Changelog:
https://hg.reportlab.com/hg-public/reportlab/file/tip/CHANGES.md

*/*: rename CHEESESHOP to PYPI in MASTER_SITES

PR:			267994
Differential revision:	D37518
Approved by:		bapt

print/py-reportlab: Update version 3.6.11=>3.6.12

Relnotes: https://hg.reportlab.com/hg-public/reportlab/file/tip/CHANGES.md

print/py-reportlab: Update version 3.5.68=>3.6.11

PR:		267345
Reported by:	osidorkin@gmail.com

Remove WWW entries moved into port Makefiles

Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.

This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.

Approved by:		portmgr (tcberner)

Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.

print: remove 'Created by' lines

A big Thank You to the original contributors of these ports:

  *  Akinori MUSHA aka knu <knu@idaemons.org>
  *  Alan Eldridge <alane@geeksrus.net>
  *  Alex Dupre <ale@FreeBSD.org>
  *  Alex Dupre <sysadmin@alexdupre.com>
  *  Alexander Vereeken <Alexander88207@protonmail.com>
  *  Alexey Dokuchaev <danfe@FreeBSD.org>
  *  Alonso Cardenas Marquez <acm@FreeBSD.org>
  *  Andreas Klemm <andreas@FreeBSD.org>
  *  Andreas Klemm <andreas@klemm.gtn.com>
  *  Andrew Pantyukhin <infofarmer@FreeBSD.org>
  *  Anish Mistry <amistry@am-productions.biz>

print/py-reportlab: enable DOCS on powerpc64

print/py-reportlab: Add CPE information

Approved by:	portmgr (blanket)

print/py-reportlab: Update version 3.5.60=>3.5.68

Reported by: kai
Relnotes: https://hg.reportlab.com/hg-public/reportlab/file/tip/CHANGES.md

Remove # $FreeBSD$ from Makefiles.

print/py-reportlab: Update version 3.5.57=>3.5.60

Relnotes:	https://hg.reportlab.com/hg-public/reportlab/file/tip/CHANGES.md

print/py-reportlab: Update version 3.5.55=>3.5.57

Relnotes:	https://hg.reportlab.com/hg-public/reportlab/file/tip/CHANGES.md

Drop python 2.7 support from a few ports

With hat:	portmgr

print/py-reportlab: Update version 3.5.54=>3.5.55

Relnotes:	https://hg.reportlab.com/hg-public/reportlab/file/tip/CHANGES.md

print/py-reportlab: Update version 3.5.53=>3.5.54

Relnotes:		https://hg.reportlab.com/hg-public/reportlab/file/tip/CHANGES.md

print/py-reportlab: Update version 3.5.21=>3.5.53

- Add TEST framework
- Update WWW

PR:		250420
Submitted by:	osidorkin@gmail.com

Convert the tree to use PY_PILLOW

With hat:	portmgr
Originally submitted by:	kai

graphics/py-pillow: Update to 7.0.0

* Repo-Copy the Pillow 6.2.2 release to graphics/py-pillow6 to retain
  backwards compatibility for Python 2 consumers as the Pillow 7.0.0 release
  dropped the support for Python 2.

* Apply conditional statements to use either Pillow 7.x or Pillow 6.x for
  consumers that can be built for Python 2 or newer.

* Exceptions are ports that can be built only for either Python 2 or
  Python 3.  For the first case, consumers are just assigned to the
  repo-copied graphics/py-pillow6.

* Also remove Pillow from BUILD_DEPENDS of math/py-PyWavelets as it is not
  listed in setup.py as a build dependency [1] and relax the version

Temporarily disable the DOCS option on powerpc64.

For reasons not yet understood, having this option enabled on powerpc64
consumes all memory and swap during poudriere builds.

On certain machines with a recent -CURRENT with patches, this panics
the machine.

Approved by:	portmgr (tier-2 blanket)

print/py-reportlab: Update version 3.5.20=>3.5.21

print/py-reportlab: Update version 3.5.19=>3.5.20

print/py-reportlab: Update version 3.5.18=>3.5.19

print/py-reportlab: Update version 3.5.17=>3.5.18

print/py-reportlab: Update version 3.5.13=>3.5.17

PR:		237000
Submitted by:	wenheping2000@hotmail.com

print/py-reportlab: Update version 3.5.12=>3.5.13

print/py-reportlab: Update version 3.5.11=>3.5.12

Update MASTER_SITES

Approved by:	portmgr (blanket)

print/py-reportlab: Update version 3.5.9=>3.5.11

print/py-reportlab: Update version 3.2.0=>3.5.9

PR:		233017
Submitted by:	wenheping2000@hotmail.com
Relnotes:	https://pypi.org/project/reportlab/#history

Use PY_FLAVOR for dependencies.

FLAVOR is the current port's flavor, it should not be used outside of
this scope.

Sponsored by:	Absolight

Convert Python ports to FLAVORS.

  Ports using USE_PYTHON=distutils are now flavored.  They will
  automatically get flavors (py27, py34, py35, py36) depending on what
  versions they support.

  There is also a USE_PYTHON=flavors for ports that do not use distutils
  but need FLAVORS to be set.  A USE_PYTHON=noflavors can be set if
  using distutils but flavors are not wanted.

  A new USE_PYTHON=optsuffix that will add PYTHON_PKGNAMESUFFIX has been
  added to cope with Python ports that did not have the Python
  PKGNAMEPREFIX but are flavored.

  USES=python now also exports a PY_FLAVOR variable that contains the

Now builds on sparc64.

Approved by:	portmgr (tier-2 blanket)

Remove ${PORTSDIR}/ from dependencies, categories m, n, o, and p.

With hat:	portmgr
Sponsored by:	Absolight

print/py-reportlab: Update version 3.0=>3.2.0 [1]

- Fix WWW [1]
- Convert to OPTIONSNG

PR:		205794 [1]
Submitted by:	cs [1]

print/py-reportlab: Fix PORTDOCS

- Strip Libraries
- Fix patch files to reflect 'make makepatch'

PR:             200602
Submitted by:   amdmi3@FreeBSD.org

Cleanup DIST* variables.

When appropriate:
- Try to use DISTVERSION{SUF,PRE}FIX
- Replace PORTNAME-PORTVERSION by DISTNAME
- Convert MASTER_SITES to use macros
- Other light cleanup

With hat:	portmgr
Sponsored by:	Absolight

Change my non-FreeBSD MAINTAINER mail to bofh@

Approved by:	bapt

Update "BSD" license in print category

- Convert ports of news/ and print/ to new USES=python

Approved by: portmgr (implicit)

The FreeBSD x11@ and graphics team proudly presents
a zeising, kwm production, with help from dumbbell, bdrewery:

NEW XORG ON FREEBSD 9-STABLE AND 10-STABLE

This update switches over to use the new xorg stack by default on FreeBSD 9
and 10 stable, on osversions where vt(9) is available.
It is still possible to use the old stack by specifying WITHOUT_NEW_XORG in
/etc/make.conf .
FreeBSD 8-STABLE and released versions of FreeBSD still use
the old version.
A package repository with binary packages for new xorg will
be available soon.

This patch also contains updates of libxcb and related ports, pixman, as well

- Repocopy print/py-reportlab to print/py-reportlab1
  to preserve version 1.x and to update to 3.0

  print/py-reportlab:
    - Update print/py-reportlab to 3.0 based on print/py-reportlab2
    - Support STAGEDIR
    - Use PYDISTUTILS_AUTOPLIST
      * Remove pkg-plist, accordingly
    - Set CONFLICTS
    - Add PORTSCOUT
    - Replace tab with a single space after WWW: in pkg-descr

  print/py-reportlab1:
    - Support STAGEDIR
    - Add PKGNAMESUFFIX not to duplicate ports with the same name

Python cleanup:
- USE_PYTHON* = 2.X -> USE_PYTHON* = 2
- USE_PYTHON* = 2.X+ -> USE_PYTHON* = yes
Reviewed by:	python (mva, rm)
Approved by:	portmgr-lurkers (mat)

Add NO_STAGE all over the place in preparation for the staging support (cat:
print)

- Set / Update Portscout flags
- Pass maintainership to submitter

PR:             166062 166105 166112 166113 166114
                166115 166141 166154 166155 166156
Submitted by:   Muhammad Moinur Rahman <5u623l20@gmail.com>
Feature safe:   yes

Remove more tags from pkg-descr files fo the form:

- Name
em@i.l

or variations thereof. While I'm here also fix some whitespace and other
formatting errors, including moving WWW: to the last line in the file.

- Readd SHA256

- Move to py25 or above
- While here kick md5 support

Update MASTER_SITES/DISTFILES, remove BROKEN=does not fetch.

Properly use MASTER_SITE_LOCAL, even if the port itself is BROKEN

Submitted by:   uqs

Mark BROKEN: does not fetch.

Reset perky@FreeBSD.org due to maintainer-timeouts and no response
to email.

Hat:            portmgr

- Get rip python 2.3+

Note:
Python 2.3 is't longer supported and have a lot of security issues.
Convert 2.3+ to yes/or 2.4/5+

With hat:       portmgr

- Fix warnings with python 2.6

PR:             137396
Submitted by:   Wen Heping <wenheping@gmail.com>
Approved by:    maintianer timeout

- Update lang/python26 and make Python 2.6.2 to the default Python version

Tested by:      3 pointyhat runs
Thanks to:      pav, gahr, lwhsu, mva, amdmi3

Update to 1.21.2

PR:             125135
Submitted by:   Wen heping <wenheping@gmail.com>

 - Make Python 2.5.1 the default Python version
 - Add significantly better support in bsd.python.mk for working with
   Python Eggs and the easy_install system

Tested by:      pointyhat runs
Approved by:    pav (portmgr)
Most work by:   perky
Thanks to:      pav

- Update to 1.21.1
- Update WWW
- Add documents

PR:             107359
Submitted by:   Li-Wen Hsu <lwhsu@lwhsu.org>
Approved by:    maintainer timeout

Remove USE_REINPLACE from all categories starting with P

SHA256ify

Approved by: krion@

Update to 1.20.

Add SIZE data.

Submitted by:   trevor

Update to 1.19

Update to 1.18

Update to 1.17

De-pkg-comment for my ports.

Update to 1.16

Remove RUN_DEPENDS on graphics/py-imaging.
Most part of reportlab doesn't require py-imaging.

Requested by:   Robin Becker <robin@reportlab.com> (author)

Update to 1.15

Added some path configuration tweaks for FreeBSD ports layout
(CMap, TrueTypeFonts and etc.)

Updating my email address.

Approved by: cjh (mentor)

upgrade to 1.14

PR:             38754
Submitted by:   maintainer

Unbreak the build by putting back the do-build and do-install targets
which were mysteriously removed in the previous revision.

Pointy hat to:  ijliao

use USE_PYDISTUTILS

Update to 1.13

PR:             36419
Submitted by:   maintainer

Update to 1.12

PR:             36222
Submitted by:   maintainer

Fix build on current.

PR:             35799
Submitted by:   maintainer
Noticed by:     bento

Upgrade to 1.11. New maintainer.    

- PORTDOCS police   - DOCSDIR support to some   - Brush out some lint    

upgrade to 1.09    

Upgrade to 1.07.    

Upgrade to 1.02.    

Upgrade to 1.01.    

Convert category print to new layout.  

Use bsd.python.mk.