Continue decomissioning teTeX

Modernize LIB_DEPENDS

With hat:	portmgr

Revert staging teTeX doesn't seems to behave the same when make stage is run as
root or run as a normal user

With hat:	portmgr

Support stage

- Convert gmake,bzip2,xz to USES

Approved by:	portmgr

Fix properties on pkg-plist

Add NO_STAGE all over the place in preparation for the staging support (cat:
print)

- update libdg to 2.1.0

- Add CONFLICTS as a preparation of importing new TeX ports based on TeXLive.
  No functional change.
- Style fixes.

- update png to 1.5.10

- Add LDFLAGS to CONFIGURE_ENV and MAKE_ENV (as it was done with LDFLAGS)
- Fix all ports that add {CPP,LD}FLAGS to *_ENV to modify flags instead

PR:             157936
Submitted by:   myself
Exp-runs by:    pav
Approved by:    pav

Fix build with clang.

PR:             ports/159895
Submitted by:   myself
Approved by:    maintainer timeout (hrs, one month)

- Kick MD5 Support

Remove old texinfo bits.  This should solve conflicts with print/texinfo.

Suggested by:   johans

Bump memory constants in texmf.cnf to suit recent machines with large memory.
JadeTeX now works with no manual configuration even for a large document like
FreeBSD Handbook.

Suggested by:   simon

- fix build for png-1.4.1
PR:             145108

- update to 1.4.1
Reviewed by:    exp8 run on pointyhat
Supported by:   miwi

- update to jpeg-8

Fix a updmap issue "psfonts_t1.map not found".

Reported by:    Anton Shterenlikht and Naram Qashat

- Fix exit status of updmap when --nomkmap[1].
- Fix pkg-plist when WITHOUT_X11[2].

Spotted by:     stas[1] and Andy Clayton[2]
PR:             ports/140875 [2]

- bump all port that indirectly depends on libjpeg and have not yet been bumped
or updated
Requested by:   edwin

Fix build and bump PORTREVISION.

Spotted by:     pointyhat

Add missing dependency.

Submitted by:   Mel
PR:             ports/123576

- Remove unneeded dependency from gtk12/gtk20 [1]
- Remove USE_XLIB/USE_X_PREFIX/USE_XPM in favor of USE_XORG
- Remove X11BASE support in favor of LOCALBASE or PREFIX
- Use USE_LDCONFIG instead of INSTALLS_SHLIB
- Remove unneeded USE_GCC 3.4+

Thanks to all Helpers:
        Dmitry Marakasov, Chess Griffin, beech@, dinoex, rafan, gahr,
        ehaupt, nox, itetcu, flz, pav

PR:             116263
Tested on:      pointyhat
Approved by:    portmgr (pav)

Fix some manpages that should have been in MLINKS.

Submitted by:   brian

- Welcome X.org 7.2 \o/.
- Set X11BASE to ${LOCALBASE} for recent ${OSVERSION}.
- Bump PORTREVISION for ports intalling files in ${X11BASE}.

Update MASTER_SITE_SUBDIR.

Add $TEXMF/fonts/map// to the tail of updmap(1)'s search path
for *.map files in case no map file is found in
$TEXMF/fonts/map//<dviwarename>//.  While map files should
be separated in this manner to prevent updmap(1) from getting
confused by difference in the file formats between dvips and
dvipdfm, the current chinese/CJK package depends on the obsolete
search path and files in $TEXMF/fonts/map/CJK at this moment.

Rationale: TDS (standard TeX Directory Structure) 1.1[*] specifies
a directory for font map files should be "fonts/map/<syntax>/<package>/..."
and names like "fonts/map/<package>" are discouraged.

Bump PORTREVISION, but there is no visible change for most people.

Spotted by:     rafan
References:     [*] http://tug.org/tds/tds.html

- Fix longstanding bugs in updmap(1) which prevent it from
  working with map files for dvipdfm.

- updmap(1) now supports --progname option.

- Bump PORTREVISION.

Add a wrapper script for texdoctk(1).

PR:             ports/59553
Submitted by:   Rong-En Fan (rafan at infor dot org)

- Add patches for security issues
- Bump PORTREVISION

Approved by:    hrs
Obtained from:  gentoo
Security:       CVE-2005-3624, CVE-2005-3625, CVE-2005-3626, CVE-2005-3627,
                http://secunia.com/advisories/18303/

Conversion to a single libtool environment.

Approved by:    portmgr (kris)

- Add libxpdf security patches
- Add SHA256 checksums

PR:             ports/90067
Submitted by:   mnag
Security:       CVE-2005-3191, CVE-2005-3192, CVE-2005-3193

Add USE_GHOSTSCRIPT_RUN=yes for ports which use epstopdf(1).

Submitted by:   thierry

Mass-conversion to the USE_AUTOTOOLS New World Order.  The code present
in bsd.autotools.mk essentially makes this a no-op given that all the
old variables set a USE_AUTOTOOLS_COMPAT variable, which is parsed in
exactly the same way as USE_AUTOTOOLS itself.

Moreover, USE_AUTOTOOLS has already been extensively tested by the GNOME
team -- all GNOME 2.12.x ports use it.

Preliminary documentation can be found at:
        http://people.FreeBSD.org/~ade/autotools.txt

which is in the process of being SGMLized before introduction into the
Porters Handbook.

Light blue touch-paper.  Run.

Build libkpathsea with -fPIC.

Suggested by:   Pascal Hofstee (caelian at gmail dot com)

- Use SUB_FILES and SUB_LIST instead of own sed script.
- Override user-defined TEXINPUTS, TEXMF, TEXMFCNF variables
  during the build.  Add a note to pkg-message that
  setting these variables in a wrong way may prevent
  teTeX from working.

. pre-install -> pre-su-install as files are installed in ${PREFIX} during
  this phase.  This makes the port installable by a non-root user.

Approved by:    hrs
Inspired by:    jhb

- Fix pkg-plist.
- Install ${TEXMFCONFIGDIR}/web2c/updmap.cfg.
- Some style changes.

Increase the default hash size.  This is required for typesetting
the FreeBSD Handbook with JadeTeX.  Bump PORTREVISION.

Make sure to rescan the texmf* directories just before
regenerating .fmt and .map files.  Without this step,
the regeneration during pkg_add could fail under some circumstances.

Reported by:    lofi

Add an ${RM} line forgotten in the previous commit.

- Generate .fmt and .map files during package install.
- Remove old configuration files in the texmf-var directory
  which prevent the fmtutil utility from working.
- Bump PORTREVISION.

Update to teTeX-3.0.

Temporary add http://people.freebsd.org/~edwin/ to the MASTER_SITES
to host the disappeared beta.

Informed maintainer.

(forced commit)
The log in the previous commit should have stated
"Update to 2.99.13.20050204", not 2.99.13.20040204.

Pointed out by: adamw

Update to 2.99.13.20040204, a teTeX-3.0 release candidate.

A lot of tools and macros has been updated and the share/texmf* directory
structure has been changed as well.  The portupgrade utility should work,
but please read http://people.freebsd.org/~hrs/tetex-upgrade.txt before
upgrading.

Fix a buffer overflow which can be triggered by
a large /Encrypt /Length keyLength value.  Bump PORTREVISION.

Obtained from:  ftp://ftp.foolabs.com/pub/xpdf/xpdf-3.00pl3.patch
CVE Name:       CAN-2005-0064

Fix the missing dvipdfm.1 in ${MAN1}.

Reported by:    kris

Patch vulnerability in imported xpdf code. Bump PORTREVISION.

Approved by:    pav(mentor)
With hat:       secteam

References:    
http://www.vuxml.org/freebsd/e3e266e9-5473-11d9-a9e7-0001020eed82.html

- Remove tetex-modesw dependency.
- Bump PORTREVISION.

- Fix a problem that some characters are not properly rendered
  when dvipdfmx is used.

- Bump PORTREVISION.

- Fix dependency[*]

Spotted by:     lesi[*]

- Fix dependency when WITHOUT_X11=yes is specified[1].
- Take maintainership[2].

Submitted by:   Markus Mann (max93 at despammed dot com) [1]
PR:             ports/70940 [1]
Approved by:    demon (maintainer) [2]

Security update to libxpdf.

CVE ID: CAN-2004-0888

Fix "I can't find file `ushyph1.tex'" problem and
bump PORTREVISION.

PR:     ports/73170, ports/73205, ports/73207
sleuthing done with support from:       matusita

Add more CONFLICTS.

Add a patch to fix a bug which prevents etex(1) from working.  Without
this patch, the following code fragment causes a segmentation fault.

 \toksdef\whatevertoks = 266
 \toksdef\extratoks = 267
 \whatevertoks={junk}
 \everypar{\extratoks=\whatevertoks}
 \immediate\write16{t={\the\toks265}}
 some paragraph\par
 \bye

Approved by:    linimon (mentor)

Make use of t1lib properly.

PR:             ports/68210
Submitted by:   Ulrich Spoerlein (q at uni.de)
Approved by:    linimon (mentor)

Disable the OPTIONS line since it can confuse the users
when print/teTeX-base is installed as a dependency.

print/teTeX restructuring:
        print/teTeX-base installs binaries in the teTeX distribution.  This
        is based on the old version of print/teTeX (repo-copy'd).

PR:             ports/67452
Approved by:    linimon (mentor)
Approved by:    demon (print/teTeX maintainer, in concept)