print/tex-luatex: mark as PIE_UNSAFE (+)

Reported by:	bulk -t

Approved by:	portmgr (blanket)

Sponsored by:	Future Crew, LLC

*/tex*: Fix poudriere qa

During my last commit on tex* somehow I built the ports without -t
causing poudriere to skip some qa check. These are fixed in this
commit.

Reported by:	jhale
Sponsored by:	Nepustil

*/tex*: Update version 20230313=>20240312

- devel/tex-kpathsea: Update version 6.3.5=>6.4.0
- devel/tex-libtexlua: Update distinfo
- devel/tex-synctex: Update distinfo
- devel/tex-web2c: Update version 20230313=>20240312
- japanese/tex-ptex: Update distinfo
- print/tex-basic-engines: Update version 20230313=>20240312
- print/tex-dvipdfmx: Update version 20230313=>20240312
- print/tex-dvipsk: Update version 20230313=>20240312
- print/tex-jadetex: Update version 20230313=>20240312
- print/tex-luatex: Update version 20230313=>20240312
- print/tex-ptexenc: Update version 1.4.3=>1.4.6
- print/tex-xdvik: Bump REVISION
- print/tex-xetex: Update verison 0.99993=>20240312
- print/tex-xmltex: Update verison 1.9=>20240312
- print/texlive-base: Update version 20230313=>20240312
- print/texlive-docs: Update version 20230313=>20240312
- print/texlive-texmf-source: Update version 20230313=>20240312
- print/texlive-texmf: Update version 20230313=>20240312
- print/texlive-tlmgr: Update version 20230313=>20240312
- print/xpdfopen: Update version 0.86=>20240312

Sponsored by: Nepustil

print/tex-luatex: Enable the new luahbtex engine

- There was an error in the MASTER_SITES but as the port shares the same
  distfile among other ports the error was never triggered.

Reported by:	tcberner

*/tex*: Update version 20210325=>20230313

- devel/tex-kpathsea: Update version 6.3.3=>6.3.5
- print/texlive-tlmgr: Update version 20210325=>20230313
  * Add LICENSE GPLv2
- devel/tex-libtexlua: Update distinfo from 20230313 dists
- devel/tex-libtexluajit: Update distinfo from 20230313 dists
- print/tex-ptexenc: Update version 1.3.9=>1.4.3
  * Pet portclippy
- devel/tex-web2c: Update version 20210325=>20230313
- devel/tex-synctex: Update distinfo from 20230313 dists
- print/tex-basic-engines: Update version 20210325=>20230313
- print/texlive-base: Update version 20210325=>20230313
- print/texlive-docs: Update version 20210325=>20230313
- print/texlive-full: Update version 20210325=>20230313

Mk/**tex.mk: Convert bsd.tex.mk to USES=tex

- Update all the consumers to use USES=tex
- USE_TEX=yes is the old way of writing USES=tex which has been removed
  and replaced in all ports
- Almost all of the USE_TEX features remains unchanged
- Some consumers had the same variables defined both in the mk
  infrastructure and also in the ports which have been removed from the
  ports as those are redundant.

In case any of the consumers are failing to build please make sure that
the nexessary USES=tex is there. Unlike previous USE_TEX=yes will no
longer load the required VARS for tex and related dependencies.

Reviewed by:	portmgr
Approved by:	portmgr (blanket)

cleanup: remove trailing whitepaces

tex* : Update version 20150521=>20210325

- Update MASTER_SITES_TEX_CTAN from https://tug.org/historic/
- Update texlua to use texlua53 library
- Deprecate CSLaTeX format
- Remove aleph as per Upstream
- Add common variables TEXLIVE_YEAR and TEXLIVE_VERSION to be used in
  all ports related to tex*
- Fix dependency of print/texlive-texmf-source [1]
- devel/tex-kpathsea: Update version 6.2.1=>6.3.3
- devel/tex-libtexlua: Update version 5.2.4=>5.3.6
- devel/tex-libtexluajit: Update version 2.0.3=>2.1.0
- devel/tex-synctex: Update version 1.17.0=>2.0.0
- devel/tex-web2c: Update version 20150521=>20210325
- editors/texworks: Fix build with newer tex version

print/tex-luatex: Update maintainer from freebsd-tex@ to tex@

PR:		257601
Approved by:	tcberner (mentor)

print/tex-luatex: Avoid mixing libc++ and libstdc++, and don't use -fcommon

This port was not respecting the CC and CXX variables, thus it could
pick up gcc and g++ instead, and that would cause mixups between
libstdc++ (which is preferred by gcc) and libc++ (which is in base),
ultimately leading to link errors.

Also, the port uses a very old version of tex so it suffers from a few
-fno-common issues, mostly variables that have been declared without an
'extern' specifier. Add a few patches to fix these.

Appproved by:	maintainer timeout
PR:		234221
MFH:		2021Q2

print/texlive-full: Update maintainership of TeX Live universe ports

- Give the maintainership of the TeX-live related ports to the FreeBSD
  TeX group [1].

[1] https://wiki.freebsd.org/tex

Approved by:	hrs

One more small cleanup, forgotten yesterday.
Reported by:	lwhsu

Remove # $FreeBSD$ from Makefiles.

graphics/poppler: update to 21.01.0

Release 21.01.0:
        core:
         * Faster routines for jpeg decoding
         * Fix reading signatures in encrypted files
         * Add white point correction when lcms is used
         * JBIG2Stream: Fix byte counting
         * Fix potential data loss if we try to fetch a non existing Ref after
modifying the document
         * Specifically use DeviceGray instead of DefaultGray for softmasks
         * Fix various issues handling broken files

        utils:
         * pdftocairo: Setmode binary for windows
         * pdfsig: Add hability to digitally sign files

graphics/poppler: update to 20.12.0

Changelog:
        core:
         * Draw better circles for circle annotations
         * Fix annotation line width if no appearance stream or style are given
         * Tweak rendering of highlight annotations
         * Fix border rendering of some annotations
         * Fix rendering of some files. Issue #976 Issue #567
         * PSOutputDev: provide options to set the rasterization color space and
ICC profile
         * PSOutputDev: for splashModeCMYK8 and language level >=2 activate
overprint emulation
         * PSOutputDev: use the DeviceN8 bitmap for rasterization with
CMYK-output + overprint
         * Use the font name without subset tag when querying for a system font
         * Splash: Fix wrong x adjustment during clipping
         * Splash: Fix blitImage in uncolored tiling patterns

graphics/poppler: update to 20.10.0

Release 20.10.0:
        core:
         * Filter out repeated forms
         * Implement EmbedStream::reset()
         * CairoOutputDev: evict just font faces owned solely by cache.
         * Splash: Rename Yd to Ydown, Xu to Xup, etc.
         * Splash: fix crash in out-of-memory situation.
         * Fix some undefined behaviour situation with forged files

PR:		250052
Exp-run by:	antoine

print/tex-luatex: fix build on recent current

Bump revisions of poppler consumers after r544863

graphics/poppler: update to 0.90

Release 0.90.0:
        core:
         * Color profile tweaks
         * Small signature improvements
         * BBoxOutputDev: Fix calculation when type3 fonts are involved
         * Fix potential crash when reading Forms
         * Fix infinite loop in broken file
        glib:
         * Fix adding annots in rotated pages
         * Add ability to reset forms
         * Several fixes to the documentation
        qt5:
         * Make it clear we require Qt 5.5

graphics/poppler: update to 0.89.0

Release 0.89.0:
        core:
         * Add support for ResetForm action. Issue #225
         * Fix crash in PDFDoc::getSignatureFields when there's no Forms at all
         * Fix exporting to PS of some files with CID fonts
         * Use ICC profiles in PS output (if new enough lcms is used)
         * Allow almost-singular tiling pattern matrices. Issue #894
         * Fix memory leak when failing to load some fonts
         * CairoOutputDev: Use stroke opacity when clipping to a stroke path
         * CairoOutputDev: Fix tiling patterns when pattern cell is too far.
Issue #190

        glib:
         * Add poppler_movie_get_aspect

        cpp:
         * Add the font infos to the text_box object

Exp-run by:	antoine
PR:		246848

graphics/poppler: update to 0.88.0

Release 0.88.0:

        core:
         * Support Widget Annotation Buttons not linked to any Form
         * SplashOuputDev: Use stroking opacity when clipping to a stroke path
         * Handle 1 bit RGB images in ICC colorspace
         * Internal code improvements

        qt5:
         * Add Document::signatures. Returns signatures not attached to any page
         * ArthurOutputDev: Fix font hinting
         * ArthurOutputDev: Set the opacity when filling with axial gradients
         * ArthurOutputDev: Implement the clipToStrokePath method

graphics/poppler: update to 0.87.0

Release 0.87.0:
        core:
         * Fix crashes due to inconsistent vtables for Clang builds
         * Fix leak in broken files
         * Internal code improvements

        qt5:
         * Add option to get form choice for export value
         * ArthurOutputDev: Avoid division by zero in updateLineDash. Issue #695

        glib:
         * Internal code improvements

         utils:
         * pdftohtml: Fix memory leak in HtmlOutputDev::getLinkDest

PR:		245150
Exp-run by:	antoine

Update poppler to 0.86.1

Release 0.86.1:
        core:
         * Fix regression in Browse Link handling
         * Internal code improvements

Release 0.86.0:
        core:
         * Fix link content exfiltration attack
         * Splash: Implement gouraudTriangleShadedFill for some non parametrized
shadings. Issue #881
         * Fix case unsensitive search for Old Hungarian, Warang Citi,
Medefaidrin and Adlam
         * Internal code improvements

        glib:

Bump revision of poppler dependencies

- poppler was updated in r525051, bump revisions

graphics/poppler: update to 0.84.0

Release 0.84.0:
        core:
         * Fix crash when converting from Unicode to ASCII-7
         * Splash::scaleImageYdXu: Protect against crash if srcWidth is too big
         * JBIG2Stream: fix potential crash in malformed documents
         * JBIG2Stream: fix leak in reset() if called several times
         * Internal code improvements

        utils:
         * pdfimages: Add error message if first page is larger then number of
pages.
         * pdfinfo: Improved paper size recognition
         * pdfsig: Fix exit code when dumping signatures
         * pdftocairo: Error out when even/odd selects 0 pages

Add USES=xorg USES=gl, ports categories p

Add USES=xorg and USES=gl to ports in categories starting with 'p'
While here, try to sprinkle other USES (mostly gnome and sdl) as needed.

graphics/poppler: update to 0.82.0

Release 0.82.0:
        core:
         * Fix not being able to open some files. Issue #832
         * Fix crashes in malformed files
         * Fix memory leak on broken files
         * Minor performance improvements
         * Minor code improvements

        glib:
         * Add poppler_document_new_from_bytes
         * PopplerAttachment: Silence deprecation warnings for ctime/mtime

        build system:
         * pdf-inspector: Support builddir != srcdir
         * Install Cairo* headers if Cairo has been found

Thanks to adridg@ for fixing all the fallout.

Exp-run by:	antoine
PR:		241532
Approved by:	gnome (kwm, implicit)

graphics/poppler: update to 0.76.1

From Changelog at https://poppler.freedesktop.org/releases.html :

Release 0.76.1:
        core:
         * Make the mul tables be calculated at compile time with constexpr.
         * splash: Fix compile with SPLASH_CMYK enabled
         * Some typo fixing in error messages

        qt5:
         * Fix regression in annotation handling

        build system:
         * Fix some typos in build system output and comments

print/tex-xetex, print/tex-luatex: prepare for poppler upgrade

There are many api changes inside poppler, and our TeX distribution is ancient.
For now, switch these to use their bundled version of poppler.

PR:		233452

Update mpfr to 4.0.1 release and bump PORTVERSION of dependent ports.

print/tex-luatex: pet portlint

PR:		225448

print/tex-luatex: fix build with C++11 compilers on CURRENT

PR:		225448
Reported by:	O.Hartmann <ohartmann@walstatt.org>
Approved by:	hrs (maintainer timeout)
Submitted by:	Walter Schwarzenfeld <w.schwarzenfeld@utanet.at>

Add missed PORTREVISION bumps after recent poppler update

Chase update of graphics/poppler (and slaves ports) in revision r430777

Chase update of Poppler after revision r421386

Remove ${PORTSDIR}/ from dependencies, categories m, n, o, and p.

With hat:	portmgr
Sponsored by:	Absolight

Update poppler to 0.40.0. [1]

Add patches to py-poppler [2] and rubygem-poppler [3] to fix the build
of these ports with poppler 0.39+.

PR:		206293 [1]
Submitted by:	olivierd@ [1]
Obtained from:	ubuntu [2], rubygem-poppler upstream [3]

print/tex-luatex: Fix typo (requires bump)

Approved by:	just-fix-it

Update poppler to 0.34.0. [1]

Chase all users of shlib version change of libpoppler.so.

PR:		201477 [1]
Submitted by:	olivierd@ [1]

- Separate libsynctex from tex-web2c to devel/tex-synctex.
- Separate basic TeX engines from tex-web2c to print/tex-basic-engines.
- Add CTAN mirrors to MASTER_SITES.
- Drop gmake where not required.
- Remove extra dependencies in print/tex-aleph, print/tex-dvipdfmx,
  print/tex-luatex, print/tex-xetex, and japanese/tex-ptex.

Update TeXLive to TL2015.

- print/texlive-infra was renamed with print/texlive-tlmgr.
  Note that currently tlmgr(1) does not work because of
  lack of TLPDB.  This will be fixed.

- Lua libraries used in LuaTeX are separated into
  devel/tex-libtexlua and devel/texlibtexluajit.
  USE_TEX supports them via keywords "texlua" and "texluajit".

- libsynctex is currently installed by devel/tex-web2c.
  This will be separated into a single port.

- Add graphics/libpotrace and use installed libpotrace
  and libharfbuzz.

Update icu to 55.1

Update poppler to 0.30.0 [1].

Make sure we use openjpeg1 in poppler, while openjpeg2 support
was added there still bugs in openjpeg2 that need to be fixed.
Add patches to inkscape for API changes in poppler 0.29.0 [2].

PR:		196599 [1]
Submitted by:	olivierd@ [1]
Exp-run by:	antoine@
Obtained from:	upstream [2]

Bump portrevision after png update

Change libpng15.so to libpng.so in LIB_DEPENDS to prepare the upgrade

Bump PORTREVISION after graphics/poppler update to 0.26.3

Cleanup plist

Fix duplicated files.

Spotted by:	Jan Henrik Sylvester

Update TeXLive to 2014.

- Note that full support of configuration tools such as tlmgr and texconfig
  is not ready yet.

- Most of dviware now supports libpaper to choose the default papersize.
  Use paperconfig(8) utility or print/papersize-default-* packages.

- Some quite old macros of the age of latex209 have been removed, and
  there are user-visible/invisible incompatibilities.  Please send a report
  to freebsd-tex@FreeBSD.org or file a PR if you have trouble.

Support stage for texlive, given it is impossible to rebuild the fmt files into
the stage then they are now rebuild in post-installation, like it is done in
other package system

- Convert gmake,bzip2,xz to USES

Approved by:	portmgr

The FreeBSD x11@ and graphics team proudly presents
a zeising, kwm production, with help from dumbbell, bdrewery:

NEW XORG ON FREEBSD 9-STABLE AND 10-STABLE

This update switches over to use the new xorg stack by default on FreeBSD 9
and 10 stable, on osversions where vt(9) is available.
It is still possible to use the old stack by specifying WITHOUT_NEW_XORG in
/etc/make.conf .
FreeBSD 8-STABLE and released versions of FreeBSD still use
the old version.
A package repository with binary packages for new xorg will
be available soon.

This patch also contains updates of libxcb and related ports, pixman, as well

Chase boost and icu bump
While here convert some LIB_DEPENDS

Fix properties on pkg-plist

Update poppler to 0.24.4.

Update comment.
Use new LIB_DEPENDS syntax, use USES=pathfix.
Stagify.

Bump portrevision of all affected ports, and Update poppler* LIB_DEPENDS to
new syntax.

Add NO_STAGE all over the place in preparation for the staging support (cat:
print)

Add an explicit dependency upon pkg-config (USES+=pkgconfig)
uncovered by an exp libiconv -> inconv swith.

Approved by:	portmgr (implicit)

Add USE_TEX=texlive for TeXLive-specific ports.

- Separate print/tex-dvipdfmx from print/texlive-base and add libpaper
  support.  dvipdfmx's default paper size can be set by
  ${LOCALBASE}/etc/papersize and/or PAPERSIZE environment variable as
  other programs like print/psutils do.

- Use absolute pathname in {fmtutil,texconfig,updmap}-sys programs because
  manually-installed and/or old TeXLive files can prevent them from
  working. [1]

- Fix pkg-plist in print/texlive-texmf.

- Remove DIST_SUBDIR from Mk/bsd.tex.mk.

Reported by:	bsam, Stephen Montgomery-Smith [1]

TeXLive mega commit.  The following ports have been added:

  * Meta port
   - print/texlive-full: meta port to install all of the TeXLive components

  * Libraries
   - devel/tex-kpathsea: kpathsea library
   - devel/tex-web2c: WEB2C toolchain and TeX engines
   - print/tex-ptexenc: character code conversion library for pTeX

  * Base part of the TeXLive
   - print/texlive-base: binary programs in TeXLive
   - print/texlive-texmf: macro and font data in TeXLive
   - print/texlive-infra: tlmgr dependency (Perl modules)