Remove expired ports:
2016-11-01 math/octave-forge-octgpr: Broken for more than 6 months
2016-11-01 math/octave-forge-spline-gcvspl: Broken for more than 6 months
2016-11-01 www/pear-Services_SharedBook: Broken for more than 6 months
2016-11-01 devel/py-snackwich: Depends on broken and expiring devel/py-snack
2016-11-01 math/octave-forge-ad: Broken for more than 6 months
2016-11-01 math/octave-forge-xraylib: Broken for more than 6 months
2016-11-01 x11-toolkits/py-traitsbackendwx: Broken for more than 6 months
2016-11-01 x11-toolkits/py-traitsgui: Depends on broken and expiring
x11-toolkits/py-traitsbackendwx
2016-11-01 security/lsh: Broken for more than 6 months
2016-11-01 devel/py-snack: Broken for more than 6 months
2016-11-01 security/massh: Broken for more than 6 months
2016-11-01 www/hydra: Broken for more than 6 months
2016-11-01 math/py-pyfst: Broken for more than 6 months
2016-11-01 archivers/ruby-zip: Broken will all supported versions of Ruby
2016-11-01 devel/ruby-langscan: Broken will all supported versions of Ruby

Deprecate ports broken for more than 6 months

Remove ${PORTSDIR}/ from dependencies, categories v, w, x, y, and z.

With hat:	portmgr
Sponsored by:	Absolight

- Update security/gnutls to 3.4.10.
- Rename the LIBDANE option DANE because that's the name of the protocol
  supported by libgnutls-dane and gnutls-cli.  Also clarify the option
  description.
- Add an IDN option.
- libgnutls-openssl has been removed in 3.4.  Some ports used this library
  in their LIB_DEPENDS but no port actually required it.
- Some old API functions have been removed.  Ports that used these have been
  updated or patched to use the new API.
- Add a patch to print/cups to prevent overlinking of libgnutls.so.
- Bump PORTREVISION on dependent ports.

net-im/jabber: This port used the old API to give users fine grained
control over which crypto algorithms were used via a configuration file.
It's not immediately obvious how to port this to the new API so the port
always uses the defaults now.

www/hydra: Mark BROKEN.  This uses more removed calls than the other ports,
is said to be alpha quality and not fully functional and has been abandoned
10 years ago.

PR:		207768
Exp-run by:	antoine
Approved by:	portmgr (antoine)

- Modernize plist

Support STAGEDIR.

PR:		ports/193169
Submitted by:	Ports Fury.

Rename all patches that contain '::' as a path separator, and use
'__' instead.

- Replace security/gnutls with security/gnutls3 and update to 3.2.15
- Bump PORTREVISION on all ports that depend on security/gnutls and
  adjust all ports that depend on security/gnutls3
- Update mail/anubis to version 4.2 which supports gnutls 3.x
- Update mail/libvmime to a development snapshot (recommended by upstream
  developers)

PR:		191274
Exp-run by:	antoine
Approved by:	portmgr (antoine)

Add NO_STAGE all over the place in preparation for the staging support (cat:
www)

Rename www/hydra package name to hydra-web to avoid confusion with
security/hydra
While here adjust CONFLICTS_INSTALL
modernize lib_depends
remove leading article in COMMENT

- Get rid of PTHREAD_CFLAGS and PTHREAD_LIBS (category: www)

Approved by:	portmgr

- Add UPDATING entry for gnutls update
- Chase shlib version bump for dependant ports

Move the rc.d scripts of the form *.sh.in to *.in

Where necessary add $FreeBSD$ to the file

No PORTREVISION bump necessary because this is a no-op

In the rc.d scripts, change assignments to rcvar to use the
literal name_enable wherever possible, and ${name}_enable
when it's not, to prepare for the demise of set_rcvar().

In cases where I had to hand-edit unusual instances also
modify formatting slightly to be more uniform (and in
some cases, correct). This includes adding some $FreeBSD$
tags, and most importantly moving rcvar= to right after
name= so it's clear that one is derived from the other.

- Add LDFLAGS to CONFIGURE_ENV and MAKE_ENV (as it was done with LDFLAGS)
- Fix all ports that add {CPP,LD}FLAGS to *_ENV to modify flags instead

PR:             157936
Submitted by:   myself
Exp-runs by:    pav
Approved by:    pav

Chase security/gnutls update and add an UPDATING entry.

- Get Rid MD5 support

Begin the process of deprecating sysutils/rc_subr by
s#. %%RC_SUBR%%#. /etc/rc.subr#

Bump PORTREVISIONs of the gnutls dependant ports to chase gnutls update.

Free most of my ports, since they aren't being maintained to a
reasonable standard.

Update CONFIGURE_ARGS for how we pass CONFIGURE_TARGET to configure script.
Specifically, newer autoconf (> 2.13) has different semantic of the
configure target. In short, one should use --build=CONFIGURE_TARGET
instead of CONFIGURE_TARGET directly. Otherwise, you will get a warning
and the old semantic may be removed in later autoconf releases.

To workaround this issue, many ports hack the CONFIGURE_TARGET variable
so that it contains the ``--build='' prefix.

To solve this issue, under the fact that some ports still have
configure script generated by the old autoconf, we use runtime detection
in the do-configure target so that the proper argument can be used.

Changes to Mk/*:
 - Add runtime detection magic in bsd.port.mk

Bump portrevision due to upgrade of devel/gettext.

The affected ports are the ones with gettext as a run-dependency
according to ports/INDEX-7 (5007 of them) and the ones with USE_GETTEXT
in Makefile (29 of them).

PR:             ports/124340
Submitted by:   edwin@
Approved by:    portmgr (pav)

- Chase security/gnutls shlib version bump
- Add an entry to UPDATING

Chase gnutls shared library version chase: adjust DEPENDS lines and
bump PORTREVISIONs.

- WWWOWN and WWWGRP are defined in bsd.port.mk

- Chase security/gnutls update
- Add an entry to UPDATING
- Pet portlint(1) for some ports while I'm here

Chase gnutls shlib version change.

- Add mirror to make fetchable.

Approved by:    ahze (mentor)

Switch to my @FreeBSD.org address.

Approved by:    ahze (mentor)

- Update to 0.1.8
- Move WWW root in default config
- Create log dir to avoid initial errors
- Add rc.d script
- Take maintainership

PR:             ports/96298
Submitted by:   Shaun Amott <shaun@inerd.com>

Chase gnutls update.

- Add SHA256

Remove obsolete mastersites.

Source:         distfile survey

At Kris's request, back out the MACHINE_ARCH spelling correction until
after 5.4-RELEASE.

Assist getting more ports working on AMD64 by obeying the
Ports Collection documentation and use 'ARCH' rather than 'MACHINE_ARCH'.

Update to version 0.1.7

PR:             ports/78747
Submitted by:   Ports Fury

- Chase security/gnutls shared library version change (13 -> 12)
- Bump PORTREVISION

- Chase libraries for new security/gnutls version

PR:             ports/64194
Submitted by:   Hendrik Scholz <hendrik@scholz.net>
Reported by:    bento via kris
No cookies for: sergei

Add NO_LATEST_LINK to avoid link stomping.

Reported by:    kris
Approved by:    kris (wearing his portsmgr hat)

SIZEify.

- Update to version 0.1.4
- Do not overwrite config files

PR:             59490
Submitted by:   Clement Laforet <sheepkiller@cultdeadsheep.org>

- Chase libraries to new gnutls version

add hydra 0.1.3
A high performance multi-threaded web server