Searches without login should now work. You must get asked to click a button.
Port details
seahubWeb frontend for Seafile
11.0.12_2wwwΣ=2 11.0.12_2Version of this port present on the latest quarterly branch.
DEPRECATED: The update of net-mgmt/seafile-server to a newer version is more difficult than expected, and the current version of www/seahub only runs on Django 4.2 This port expired on: 2026-08-31
There is no maintainer for this port.
Any concerns regarding this port should be directed to the FreeBSD Ports mailing list via ports@FreeBSD.org
===> The following configuration options are available for seahub-11.0.12_2:
NLS=on: Native Language Support
SEAFDAV=on: Enable Seafile WsgiDav-based support
SEAFOBJ=on: Enable Seafile file object modeling support
===> Use 'make config' to modify these settings
port deleted on 2026-08-31 REASON: Has expired: The update of net-mgmt/seafile-server to a newer version is more difficult than expected, and the current version of www/seahub only runs on Django 4.2
Number of commits found: 132 (showing only 100 on this page) #
www/seahub: Remove expired port
2026-08-31 www/seahub: The update of net-mgmt/seafile-server to a newer version
is more difficult than expected, and the current version of www/seahub only runs
on Django 4.2
net-mgmt/seafile-server,www/seahub: Deprecate
Updating www/seahub, and especially net-mgmt/seafile-server, is more
difficult than originally anticipated. The current version of www/seahub
also only runs with Django 4.2, which has been end-of-life since April.
Before www/seahub and net-mgmt/seafile-server are marked as BROKEN after
the migration of the affected ports to Django 5.2 [1], and then vanish
from the ports tree at the end of 2026Q2 - which would also break POLA
due the short time period - do the following to buy some time for a
possible update:
* Create required py-dj42-* ports and switch www/seahub to them. These
py-dj42-* ports were copied from their original counterparts, are
bound to Django 4.2, and have also been adapted for the PEP517 build
(Only the first 15 lines of the commit message are shown above )
*: Switch consumers over to Django 4.2
Django 3.2 reached its End-of-Life on 1st April 2024 and Django 4.2 is
the new LTS (= Long Term Support) release which will be supported until
April 2026.
* Switch most ports that use www/py-django32 to www/py-django42.
* Ports that are not compatible with Django 3.2 have already been set
with an expiration date were not taken into account.
* Bump PORTREVISION due dependency change where necessary.
PR: 276319
Reviewed by: dvl, grembo, ultima
Approved by: bofh (implicit), dvl, grembo, Kevin Golding, sunpoet,
ultima, maintainer timeout (remaining maintainers)
Differential Revision: https://reviews.freebsd.org/D44637
devel/py-python-dateutil: Move devel/py-dateutil to devel/py-python-dateutil
- Convert to USE_PYTHON=pep517
- Bump PORTREVISION of dependent ports for dependency change
- While I'm here, update audio/py-pyradio to use PYTHON_PKGNAMEPREFIX instead of
PKGNAMEPREFIX for *_DEPENDS
www/seahub: Patch for new version of Pillow
PR: 272942
Reported by: Scott Kitchin (scott@kitchin.com), Boris Tassou
(boris.tassou@securmail.fr)
Submitted by: sunpoet
Obtained from: Seafile
all: remove explicit versions in USES=python for "3.x+"
The logic in USES=python will automatically convert this to 3.8+ by
itself.
Adjust two ports that only had Python 3.7 mentioned but build fine
on Python 3.8 too.
finance/quickfix: mark BROKEN with PYTHON
libtool: compile: c++ -DHAVE_CONFIG_H -I. -I../.. -I -I. -I.. -I../.. -I../C++
-DLIBICONV_PLUG -DPYTHON_MAJOR_VERSION=3 -Wno-unused-variable
-Wno-maybe-uninitialized -O2 -pipe -DLIBICONV_PLUG -fstack-protector-strong
-fno-strict-aliasing -DLIBICONV_PLUG -Wall -ansi
-Wno-unused-command-line-argument -Wpointer-arith -Wwrite-strings
-Wno-overloaded-virtual -Wno-deprecated-declarations -Wno-deprecated -std=c++0x
-MT _quickfix_la-QuickfixPython.lo -MD -MP -MF
.deps/_quickfix_la-QuickfixPython.Tpo -c QuickfixPython.cpp -fPIC -DPIC -o
.libs/_quickfix_la-QuickfixPython.o
warning: unknown warning option '-Wno-maybe-uninitialized'; did you mean
'-Wno-uninitialized'? [-Wunknown-warning-option]
QuickfixPython.cpp:175:11: fatal error: 'Python.h' file not found
^~~~~~~~~~
1 warning and 1 error generated.
Reviewed by: portmgr, vishwin, yuri
Differential Revision: <https://reviews.freebsd.org/D40568>
Remove WWW entries moved into port Makefiles
Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.
This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.
Approved by: portmgr (tcberner)
Add WWW entries to port Makefiles
It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.
Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.
There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.
(Only the first 15 lines of the commit message are shown above )
www/py-django32: Switch consumers over to Django 3.2
Django 2.2 became End-of-Life on 11th April 2022 and Django 3.2 is the
new LTS (= Long Term Support) release which will be supported until
April 2024.
* Switch the most ports that use www/py-django22 to www/py-django32
* Switch www/seahub over to www/py-djangorestframework
* Ports that are not yet ready for Django 3.2 (only three so far) or
those that have already been set with an expiration date were not
taken into account.
* Bump PORTREVISION due dependency change where necessary.
PR: 261313
Reviewed by: bofh, dvl, koobs, ultima
Approved by: bofh, dvl, koobs, ultima, sunpoet, Kevin Golding, Ivan Rozhuk,
Alexander Sieg (maintainers)
maintainer timeout (remaining maintainers)
Differential Revision: https://reviews.freebsd.org/D34859
Seahub and Django depends: Update Django to 3.2
This is the initial commit for the migration from Django
2.2 to Django 3.2. This migration is needed due to Django 2.2
becoming is EOL as of 4/1/2022.
PR: 261313
Approved by: kai
Differential Revision: https://reviews.freebsd.org/D34456
www/py-pyjwt: Rename to www/py-pyjwt1
To make it possible to easily import py-pyjwt v2.x move the current port
to a versioned directory. Bump consumers after rename of the dependency.
PR: 254038
Update ports to Django22
django-post_office jsonfield depend has been renamed
upstream, the old django-jsonfield port does not support
django past 1.11.
PR: 245309
Approved by: sunpoet, kai, jhixson (timeout)
Differential Revision: https://reviews.freebsd.org/D28513
Updated Seafile/Seahub to 8.0.3
Changed to -server branch, some errors were creeping over
from the pro version not being compatible with the community
edition. Previously this was never an issue as you must manually
upgrade to the pro version for the new features.
Disabled seafile-controller config checking prior to startup.
The check only ran on ccnet previously and this was changed to
seafile which never implemented the function.
https://forum.seafile.com/t/seafile-controller-t-functionality-broken-on-8-x/13738
This version adds compatible with Django 2.2, this will require
coordination with multiple port devs to migrate this over
properly.
Changes: https://manual.seafile.com/changelog/server-changelog/
PR: 252715
www/py-djangorestframework: Update to 3.11.0
* Switch the port to Django 2.2 (current LTS release) as well because
Django 1.11 is End-of-Life since April. Do the same for www/py-drf-yasg.
* Repo-copy www/py-djangorestframework to www/py-djangorestframework311
which will be used as a transitional package by www/seahub until it gets
support for Django 2.2+ in the next weeks/months.
* Drop the Python 2.7 support of the remaining consumers to avoid breakage
of "bulk -a".
* Mark both repo-copied ports www/py-dj22-{djangorestframework,drf-yasg} as
deprecated because they're obsolete now.
PR: 245309
Reviewed by: sunpoet (earlier revision), ultima
Differential Revision: https://reviews.freebsd.org/D24850
* Updated to 7.1.3
This minor version update no longer supports python 2.7.
The way mysql support is detected upstream has changed. Instead of patching
the configure.ac script, I used a couple hacks for this to be detected for
custom configurations. Didn't detect any issues with this method but I'm
open to change this in the future.
Added a SeaHub upgrade message to smooth out upgrading. For upgrading from
7.0.x,
if one does not clear the cache, http 500 will be returned.
The seafile_datadir no longer points to the seahub.ini, this has been changed
upstream and may cause upgrading issues if not using the default. This can
easily be changed by setting it in rc.conf.
Changes:
https://download.seafile.com/published/seafile-manual/changelog/changelog-for-seafile-professional-server.md
graphics/py-pillow: Update to 7.0.0
* Repo-Copy the Pillow 6.2.2 release to graphics/py-pillow6 to retain
backwards compatibility for Python 2 consumers as the Pillow 7.0.0 release
dropped the support for Python 2.
* Apply conditional statements to use either Pillow 7.x or Pillow 6.x for
consumers that can be built for Python 2 or newer.
* Exceptions are ports that can be built only for either Python 2 or
Python 3. For the first case, consumers are just assigned to the
repo-copied graphics/py-pillow6.
* Also remove Pillow from BUILD_DEPENDS of math/py-PyWavelets as it is not
listed in setup.py as a build dependency [1] and relax the version
(Only the first 15 lines of the commit message are shown above )
Bump PORTREVISION for ports depending on the canonical version of GCC
as defined in Mk/bsd.default-versions.mk which has moved from GCC 8.3
to GCC 9.1 under most circumstances now after revision 507371.
This includes ports
- with USE_GCC=yes or USE_GCC=any,
- with USES=fortran,
- using Mk/bsd.octave.mk which in turn features USES=fortran, and
- with USES=compiler specifying openmp, nestedfct, c11, c++0x, c++11-lang,
c++11-lib, c++14-lang, c++17-lang, or gcc-c++11-lib
plus, everything INDEX-11 shows with a dependency on lang/gcc9 now.
PR: 238330
Change currently unused init var seahub_host so
there is no breakage for current users of seahub.
Change hard coded 0.0.0.0 for gunicorn start to
seahub_host.
PR: 237366
Submitted by: Boris Tassou <boris.tassou@sec^>
* Updated to 6.3.13
* Added patch to SeaHub to revert regression
The regression breaks the search_user function.
More details about regression can be found at:
https://github.com/haiwen/seahub/issues/3001
PR: 236047
Reported by: Martin Waschbusch <martin@wasch^>
Bump PORTREVISION for ports depending on the canonical version of GCC
defined via Mk/bsd.default-versions.mk which has moved from GCC 7.4 t
GCC 8.2 under most circumstances.
This includes ports
- with USE_GCC=yes or USE_GCC=any,
- with USES=fortran,
- using Mk/bsd.octave.mk which in turn features USES=fortran, and
- with USES=compiler specifying openmp, nestedfct, c11, c++0x, c++11-lang,
c++11-lib, c++14-lang, c++17-lang, or gcc-c++11-lib
plus, as a double check, everything INDEX-11 showed depending on lang/gcc7.
PR: 231590
* Updated Seafile to 6.3.4, Updated Seahub to 6.3.5.
* Removed flup6, this was required with fastcgi which
Seahub no longer supports
* Added django-webpack-loader and requests_oauthlib,
these were missing depends added in 6.3.x which can
errors if missing when Seahub starts.
* Removed PYTHONPATH for python2.6 and added additional
directories for Seahub "thirdpart". This can also prevent
seahub from starting.
Changes: https://manual.seafile.com/changelog/server-changelog.html
Removed fastcgi, this is no longer supported in seafile 6.3+
and previous installs 6.3+ prior to this revision are broken
when using the seahub_fastcgi option.
Update Seafile family to 6.3.1
As of Seafile 6.3.0, django has been upgraded
to 1.11. Seafile's dependencies have also been
switched to match this change.
Reviewed by: miwi
Differential Revision: https://reviews.freebsd.org/D15718
New port: www/py-djangorestframework as version 3.8.x
- py-djangorestframework 3.6.x lives on as py-djangorestframework36
- seahub and django-annotations stay on -36
PR: 227319
Submitted by: Kai <freebsd_ports@k-worx.org>
Reviewed by: antoine, sunpoet
Move net-mgmt/seafile-server's message to seahub and
change it to clarify that Seahub is required for the
full application. This will prevent users from being
confused when installing net-mgmt/seafile-server.
PR: 227337
Add compilation of i18n for multi-language support
during build phase. This will allow one to change
the language when using seahub.
Reported by: martin@wasch^
Convert Python ports to FLAVORS.
Ports using USE_PYTHON=distutils are now flavored. They will
automatically get flavors (py27, py34, py35, py36) depending on what
versions they support.
There is also a USE_PYTHON=flavors for ports that do not use distutils
but need FLAVORS to be set. A USE_PYTHON=noflavors can be set if
using distutils but flavors are not wanted.
A new USE_PYTHON=optsuffix that will add PYTHON_PKGNAMESUFFIX has been
added to cope with Python ports that did not have the Python
PKGNAMEPREFIX but are flavored.
USES=python now also exports a PY_FLAVOR variable that contains the
(Only the first 15 lines of the commit message are shown above )
