Convert more of my ports to new manual page location (part two).

x11-toolkits/fltk: the port had been improved (+)

- Add an option to enable limited Cairo rendering support
- Do not strip static libraries upon installation as this
  breaks linking against them (the case for `x11/flruler')
- Restore `files/patch-src_Makefile' which was ditched in
  r447379 (commit 2a288980b3dd) in favor of `post-install'
  target because of the above and now this code is mature
  enough and should be less fragile to patch statically
- Garbage-collect no longer useful patch added in r138020
  (commit 2a70195a3279) back in 2005 which now makes `-lm'
  appear twice in the fltk-config(1)'s LDFLAGS outputs
- Shorten local variable name in the `post-patch' target

Reported by:	pkg-fallout

x11-toolkits/fltk: update the port to version 1.3.9

This is a minor maintenance release and does not contain
new ABI features.  While here, strip installed libraries
in addition to the programs (subject to -DWITH_DEBUG).

*/*: Bump jpeg-turbo users treewide

New major version 3.0.0

Remove WWW entries moved into port Makefiles

Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.

This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.

Approved by:		portmgr (tcberner)

Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.

x11-toolkits: remove 'Created by' lines

A big Thank You to the original contributors of these ports:

  *  1wardd@airmail.net
  *  Alexander Kabaev <ak03@gte.com>
  *  Alexander Novitsky <alecn2002@yandex.ru>
  *  Alexey Dokuchaev <danfe@FreeBSD.org>
  *  Andreas Kohn <andreas@syndrom23.de>
  *  Andrew Pantyukhin <infofarmer@FreeBSD.org>
  *  Anton Berezin <tobez@FreeBSD.org>
  *  Brian Buchanan <brian@CSUA.Berkeley.EDU>
  *  Cezary Morga <cm@therek.net>
  *  Cheng-Lung Sung <clsung@FreeBSD.org>
  *  Danilo Egea Gondolfo <danilo@FreeBSD.org>

x11-toolkits/fltk: the port had been updated to version 1.3.8

FLTK 1.3.8 is a maintenance release with minor enhancements.  One new
function `fl_choice_n()' has been introduced (please see documentation
for details).

This release does not contain new ABI features and is 100% compatible
with releases 1.3.5-1.3.7.

x11-toolkits/fltk: Add CPE information

Approved by:	portmgr (blanket)

x11-toolkits/fltk: update FLTK to version 1.3.7

This release does not contain new ABI features and is 100% binary
compatible with releases 1.3.5 and 1.3.6.

PR:		254934
Submitted by:	yuri

graphics/mesa-libs: Bump reverse deps for libglvnd

Per discussion with bapt on helping pkg handle the changing of these
deps and avoiding impossible upgrade senarios.

PR:		246767
Reviewed by:	manu, bapt
Approved by:	x11
Differential Revision:	https://reviews.freebsd.org/D30824

Remove # $FreeBSD$ from Makefiles.

Add USES=xorg USES=gl, ports categories x

Add USES=xorg and USES=gl to ports in categories starting with 'x'
While here, try to sprinkle other USES (mostly gnome and sdl) as needed.

- Update FLTK to version 1.3.5 which brings many new features,
  bug fixes, and adaptations to new compilers
- Switch to the smaller .tar.bz2 distfile and make a few implicit
  dependencies explicit (as reported by `stage-qa')
- Rename `test/help' demo program to `test/help_dialog' in order
  to unbreak against upcomig `devel/ninja' update to version 1.9.0
- The ABI is 100% compatible with the previous version so no port
  revision bumps are necessary for consumer ports
- Chase HTTP redirection in the MASTER_SITES and WWW: line

PR:	235507 (ninja-related)

Remove `groff' from USES.

It was recently killed in the base system and consumers have to use
`textproc/groff' port now, which is a real PITA: it pulls in some
obscure dependencies like `print/psutils', `graphics/netpbm', but
most importantly, `ghostscript' (unconditionally), which is a huge
abomination of its own, pulling another round of dependencies, some
of which are as crazy as `graphics/svgalib' (sic).  Trying to reset
all offered knobs to `off' results in unbuildable package.

Pass NROFF as mere `echo' and be done with it.  Generated manpages
remain identical.

- Update `x11-toolkits/fltk' to version 1.3.4 (version 1.3.4-1 is available,
  but the only difference is fixes for Windows IDE solutions Visual C 2008
  and Visual C 2010, so prefer 1.3.4 to avoid dealing with the DISTVERSION)
- Move out .so.1-suffixed symlink creation to `post-install' target rather
  than patching `src/Makefile' since the patch tends to get modified with
  each update; and drop no longer needed patches that were merged upstream
- Define LICENSE_FILE as it is not just a standard boilerplate

PR:		220649 (modified)
Submitted by:	sunpoet

Register dependency on groff

PR:		213725

Revision bump of all ports with USE_GL after consolidation of mesa-libs

Approved by:	swills (mentor)
Differential Revision:	https://reviews.freebsd.org/D10845

x11-toolkits/fltk: unbreak with clang 4.0

Fl_Tree_Item.cxx:552:38: error: ordered comparison between pointer and zero
('Fl_Tree_Item *' and 'int')
    if ( from_parent->deparent(from) < 0 )      // deparent self from current
parent
         ~~~~~~~~~~~~~~~~~~~~~~~~~~~ ^ ~

PR:		216046
Obtained from:	upstream (branch-1.3)
Approved by:	portmgr blanket
MFH:		2017Q1 (changes behavior)

x11-toolkits/fltk: ensure that binary packages have complete feature support

Previously, binary packages would miss Xinerama and Xcursor dependencies and
thus were giving some odd behaviors as e.g. reported in the PR.  While here,
switch to USES+=localbase instead of manually amending CPPFLAGS and LDFLAGS.

PR:	213294

Remove ${PORTSDIR}/ from dependencies, categories v, w, x, y, and z.

With hat:	portmgr
Sponsored by:	Absolight

Convert to USES=jpeg

- Since version 1.3.3, FLTK now checks for compiler support of -fvisibility
  and -fvisibility-inlines-hidden and uses it if available to reduce shared
  library size.  Unfortunately, this hides Fl_XFont_On_Demand::value, which
  in turn causes undefined reference errors during linking.  Fix by marking
  Fl_XFont_On_Demand class as FL_EXPORT for the time being (Gentoo Linux is
  doing the same)
- Do not strip libraries for now: FLTK uses the same command for installing
  both dynamic and static libraries, but "fltk-config(1) --compile" prefers
  static, which breaks programs like `graphics/iccexamin' (threading test)
- Pull another patch from Gentoo to fix segmentation fault in vncview(1) of
  port `net/tigervnc' (Gentoo bug #529856 by Maxim Britov)
- Do not leak non-existent (build-time only) -Lfoo references in LDFLAGS as
  it can potentially lead to various sporadic bugs in programs which obtain
  these flags through fltk-config(1).  To prevent build-time conflicts that
  this gimmick was originally used for, we change shared linking command of
  fluid(1) accordingly

Since these are one-line changes likely to be merged upstream sooner rather
than later, perform them with sed(1) instead of trivial patches.

Reported and reviewed by:	antoine

Augment FLTK ports' descriptions.

- Fix the breakage caused by previous commit (r378707): restore sane order of
  knobs; resurrect documentation/Makefile patch; bring back recalculation of
  ${ETCDIR} length in Fl_Preferences.cxx, trim CONFIGURE_ARGS (again), etc.
- Restore correct LDFLAGS+= -L../src (previously -L${WRKSRC}/src), otherwise
  the build fails with e.g. previous version of FLTK libraries installed
- Take maintainership to prevent Kato's monkeys jeopardizing it all over again
- Install code examples as PORTEXAMPLES (we do not install any documentation
  because it requires LaTeX stack to build)
- Since `post-patch' target is a bit too verbose now, make it .SILENT
- Do not compile things with -Os by default (already honors user's CXXFLAGS)
- Do not blindly strip libraries and fluid(1) binary (respect ${STRIP} value)

Update to version 1.3.3

PR:		197463
Submitted by:	Ports Fury

In sight of upcoming update, clean up things a bit:
- Sort the knobs, remove "default=yes" arguments from CONFIGURE_ARGS
- In post-staging era, conditional installation of documentation is no
  longer necessary, so simplify the patch and drop post-install target

- Drop @dirrm* from and add empty directories to pkg-plists

Approved by:	portmgr blanket, kwm (for gnome@ ports)

Bump portrevision after png update

Change libpng15.so to libpng.so in LIB_DEPENDS to prepare the upgrade

- Reset maintainership of my ports

Update the default version of GCC in the Ports Collection from GCC 4.7.4
to GCC 4.8.3.

Part II, Bump PORTREVISIONs.

PR:		192025
Tested by:	antoine (-exp runs)
Approved by:	portmgr (implicit)

- Fix STAGE support for PORTDOCS

Reported by:	antoine

- Fix build in C++11 mode [1]
- Convert to new LIB_DEPENDS format
- Convert to OPTIONSng (DOCS)
- STAGE-clean

PR:		182949 [1]
Submitted by:	dt71@gmx.com [1]

Add NO_STAGE all over the place in preparation for the staging support (cat:
x11-toolkits)

- Make fetchable again by fixing MASTER_SITES

Reported by:	Kenta Suzumoto <kentas@hush.com>

Finish converting the whole ports tree to USES=pkgconfig

- Add LICENSE

- update patch as per the discussion at http://www.fltk.org/str.php?L2903

- Update to 1.3.2
  Release notes: http://www.fltk.org/articles.php?L1266
- Added a patch to fix a build error
  Reported as: http://www.fltk.org/str.php?L2903

- Update to 1.3.1
  Release notes: http://www.fltk.org/articles.php?L1253

Feature safe:	yes

- Add a patch to #undef nitems, which has been added as a macro to sys/param.h
  in r236486 and is also a member of Fl_Check_Browser class.
- Bump PORTREVISION

Notified by:		martymac

- update png to 1.5.10

- use ${PREFIX}/etc instead of /etc for system-wide preferences

PR:             162023
Submitted by:   bf
Feature safe:   yes

- Fix build with clang

Reported by:    rdivacky (via IRC)
Feature safe:   yes

- Update to 1.3.0

- Add LDFLAGS to CONFIGURE_ENV and MAKE_ENV (as it was done with LDFLAGS)
- Fix all ports that add {CPP,LD}FLAGS to *_ENV to modify flags instead

PR:             157936
Submitted by:   myself
Exp-runs by:    pav
Approved by:    pav

- Kick MD5 support

- Respect NOPORTDOCS

Reported by:    QAT

- update to 1.4.1
Reviewed by:    exp8 run on pointyhat
Supported by:   miwi

- Update x11-toolkits/fltk to 1.1.10
- Unconditionally enable threads on x11-toolkits/fltk
- Mark x11-toolkits/fltk-threads as IGNORE (master port has threads now)

- Fix build on 8.0-RELEASE after last commit

Reported by:    Jan Henrik Sylvester <me@janh.de> via freebsd-questions@
Feature safe:   yes

- Fix on 7.3 (dirent API change)

Reported by:    PH via linimon@
Feature safe:   yes

- Fix after scandir API change on STABLE as well (800501)

Reported by:    Till Plewe <till.plewe@gmail.com>
Feature safe:   yes

- Really fix after 900006

- Fix build after scandir API change

- Fix mismatching declaration

PR:             143638
Submitted by:   Dominic Fandrey <kamikaze@bsdforen.de>

- update to jpeg-8

- update to jpeg7
Tested by:      pav on pointyhat

- Actually fix plist issues (trial #2)

- Update to 1.1.9
- Minor Makefile cleanup
- Take over maintainship [1]
- Fix PLIST [2]

Approved by:    demon@ (former maintainer) [1]
Reported by:    QA Tindie [2]

Update CONFIGURE_ARGS for how we pass CONFIGURE_TARGET to configure script.
Specifically, newer autoconf (> 2.13) has different semantic of the
configure target. In short, one should use --build=CONFIGURE_TARGET
instead of CONFIGURE_TARGET directly. Otherwise, you will get a warning
and the old semantic may be removed in later autoconf releases.

To workaround this issue, many ports hack the CONFIGURE_TARGET variable
so that it contains the ``--build='' prefix.

To solve this issue, under the fact that some ports still have
configure script generated by the old autoconf, we use runtime detection
in the do-configure target so that the proper argument can be used.

Changes to Mk/*:
 - Add runtime detection magic in bsd.port.mk

- Remove USE_XLIB/USE_X_PREFIX/USE_XPM in favor of USE_XORG
- Bump PORTREVISION

Approved by:    portmgr (xorg cleanup)

Re-enable building with gcc4.2.  Apparently patches were committed
after the last amd64-7 build.

I'm doing this one myself because I was the one that marked it broken.

PR:             ports/117843
Submitted by:   Dmitry Marakasov <amdmi3 at amdmi3 dot ru>
Approved by:    portmgr (self)

Mark as BROKEN on amd64-7 and sparc64-7 due to gcc4 errors.  While here,
remove 4.X cruft.

Hat:            portmgr

- Fix gcc42 build on amd64, these diffs duplicate vendor fltk-1.1.x-r5940
  work in progress, so can be backed out on next major release of fltk.

Approved by:    demon

- Welcome X.org 7.2 \o/.
- Set X11BASE to ${LOCALBASE} for recent ${OSVERSION}.
- Bump PORTREVISION for ports intalling files in ${X11BASE}.

Correct typos plus cosmetic chenges in Makefile.

PR:             107901
Submitted by:   Ying-Chieh Chen <yinjieh@csie.nctu.edu.tw>

Update to 1.1.7

PR:             106146
Submitted by:   KATO Tsuguru <tkato432@yahoo.com>

- This no longer conflicts with fltk2

- CONFLICTS with fltk-2.*

Remove USE_REINPLACE from categories starting with X

SHA256ify

Approved by: krion@

Add '-lm' to the output of fltk-config --ldstaticflags and
fltk-config --ldflags.  libm is needed when linking against libfltk.

This fixes OpenOffice build with fltk installed.

PR:             82551
Submitted by:   Mike Durian <durian@shadetreesoftware.com>

At Kris's request, back out the MACHINE_ARCH spelling correction until
after 5.4-RELEASE.

Assist getting more ports working on AMD64 by obeying the
Ports Collection documentation and use 'ARCH' rather than 'MACHINE_ARCH'.

Remove patch-fltk-config.in: fltk-config --ldflags should not return
-L/usr/local/lib, but this breaks audio/spiralsynthmodular and
graphics/quat-gui which rely on it.

Reported by:    Kris via pointyhat.

- prepare for a new slave port x11-toolkits/fltk-threads;

- remove -L/usr/local/lib from `fltk-config --ldflags`;

- mark IGNORE if threading is enable on 4.x (if someone had a
  a clue to fix it, it would be great!).

Approved by:    demon (maintainer)

- Upgrade to 1.1.6;
- pet portlint.

Approved by:    demon (maintainer).

- Sneak CXX into configure script as CC. Configure script ignores CXX and keeps
  on linking C++ code with "cc". This fixes build on gcc 3.4

Remove the WITH_XUNICODE knob I once added, since fltk-xunicode is way
too old and obsolete.

Link with pthreads only when WITH_THREADS is defined.
Enable antialiased text.

Submitted by:   Dan Nelson <dnelson@allantgroup.com>

Add size data, approved by maintainers.

Update to version 1.1.4.

Add WITH_THREADS knob to compile with threads support.

Submitted by:   dave <dave@gufi.org>

Update to 1.1.3.

De-pkg-decomment fltk master-slave ports.

Update to 1.1.2

Spell pronounced correctly.

Style police: WWW tags should either end in a file/script or TRAILING /; Fix the
later case    

Fix typo (DICSDIR -> DOCSDIR).    

Utilize DATADIR and DOCSDIR.    

Fix detection of pthreaded MesaGL.    

Argh!  The XUnicode option was not correctly turned on..    

Update fltk to 1.0.10, fltk-xunicode to 1.0.10.20010114.    

List myself as the maintainer of fltk-xunicode.  Change MAINTAINER= in  
fltk/Makefile to MAINTAINER?= .    

Change MAINTAINER field.   I am now at FreeBSD dot org    

Convert category x11-toolkits to new layout.  

Repo copy xunicode.patch-* from patches/ to files/.  No Makefile mods   are
necessary.  

Add fltk-xunicode, FLTK with Unicode support, as a slave port to fltk.