- Finish removal of support for Linux 2.4 in bsd.linux-apps.mk and
  bsd.linux-rpm.mk.  The default linux version is now Fedora 10.
- Remove now obsolete checks for Linux 2.4 in emulators/linux_base-c6,
  emulators/linux_base-f10, and emulators/linux_dist-gentoo-stage3.
  While there, remove superfluous -p argument from ${MKDIR}.
- Remove now obsolete check for Linux 2.4 or FreeBSD 6 and lower from
  astro/google-earth.
- Remove expired Fedora Core 4 ports which were only used on FreeBSD 7
  and below.
- Update LEGAL and MOVED

PR:		ports/176877
Submitted by:	myself
Approved by:	portmgr (bapt)
Exp-run by:	bapt

Use asolute path for PLIST (prepend ${PKGDIR} to PLIST).
It's more safe that a relative path.

Inspired by PR:		ports/169702
Submitted by:	Tijl Coosemans <tijl@coosemans.org>
Discussed at:	freebsd-emulation

Set the expiration date for all ports which depend upon linux_base-fc4 to
the EoL of the last 7.x release. The 7.x branch is the only supported
FreeBSD version not yet at his EoL which needs a linux 2.4 based linuxulator
environment (linux_base-f10 doesn't work there).

I didn't bump the portrevision, this is mostly done as a hint for ports
committers to tell them that at least the emulation@-owned ports need
to stay until then (even the forbidden ones). The dependent ports need to
go at the same time, but are free to be deleted before.

Discussed with: bsam

- Kick MD5 support

Unify maintainer address for emulation ports.
(freebsd-emulation@FreeBSD.org -> emulation@FreeBSD.org)

Discussed with: netchild (emulation)

Add a more reliable mirrors for fc4 and f10 linux emulation ports.

Triggered by:   distilator
Reviewed by:    netchild (emulation)

. add linux-f10 ports to the rank of CONFLICTS for linux-fc4 ports;
. bump PORTREVISIONs.

Finish repocopies of new linux-f8 infrastructure ports:
. add CONFLICTS to 47 original ports;
. bump PORTREVISIONs for all of them;
. pet portlint for 2-3 ports (misplaced PORTREVISION).

Welcome to the new linux ports infrastructure which allows using
both current (fc4) and future linux (f8) distributions at one
ports tree.

The patch contains full changes to ports/Mk files and all ports involved.
But only infrastructure is changed. The resulting packages are the same as
before. Hence no need to bump PORTREVISIONs.

The idea was taken from bsd.gnome.mk and others.

More than 130 ports are switched to follow a new linux infrastructure
introduced by changes to bsd.port.mk, bsd.linux-rpm.mk and a new
bsd.linux-apps.mk.

Thanks for all who was involved and helped me with this work.
And help from Alexander Leidinger was incredible.

Other changes are coming. Stay tuned!

PR:             ports/132510
Submitted by:   bsam (me)
Exp-run by:     portmgr (pav)

- Remove unneeded dependency from gtk12/gtk20 [1]
- Remove USE_XLIB/USE_X_PREFIX/USE_XPM in favor of USE_XORG
- Remove X11BASE support in favor of LOCALBASE or PREFIX
- Use USE_LDCONFIG instead of INSTALLS_SHLIB
- Remove unneeded USE_GCC 3.4+

Thanks to all Helpers:
        Dmitry Marakasov, Chess Griffin, beech@, dinoex, rafan, gahr,
        ehaupt, nox, itetcu, flz, pav

PR:             116263
Tested on:      pointyhat
Approved by:    portmgr (pav)

o  remove locale dirs from pkg-plist (those locales are taken care of
   by linux_base-fc4);
o  bump PORTREVISION.

Pointed out by: pointyhat (i386-4-latest)
Approved by:    netchild (mentor, implicit)

o  fix pkg-plist at linux_base-fc4 to unbrake pointyhat building
   of x11-toolkits/linux-gtk ;-)
o  update x11-toolkits/linux-gtk to a newer version (FC3 -> FC4)
o  bump PORTREVISION for both ports

Pointed out by: pointyhat
Approved by:    netchild (mentor, implicit)

Fix plist.

Noticed by:     gohan (krismail)

- convert to use bsd.linux-rpm.mk (get rid of include of linux-gtk/Makefile) [1]
- use fixed plists [1]
- category "linux" added to those ports without it [1]
- update some ports to a recent FC3 one [1]

- remove plists/... for Alpha (there's no support since linux_base-8 for
  Alpha anymore)
- don't hardcode version numbers in some plists, use PLIST_SUB instead
  (any errors are mine, don't keep them, send them to me)

Regarding linux-ungif I declare a maintainer timeout (one month, Boris tried
to contact the maintainer) and also pull the "sweeping commit"-card (the
port which it uses as some kind of master port can not be used for this
anymore). Besides this, I don't think he will be upset when other people
do the work instead of adding an entry to his TODO list. :-)

Replace ugly "@unexec rmdir %D... 2>/dev/null || true" with @dirrmtry

Approved by:    krion@
PR:             ports/88711 (related)

 - update to 1.2.10
 - use the fedora legacy site before the rpm mirrors (should speed up the
   fetch operation)
 - allow to add SRC RPM's (not used in this port, since it also serves
   as a framework for other ports which would break then, I hope this
   will be fixed soon by seperating the framework from this Makefile)

- Hack in fedoralegacy.org which seems to carry RedHat 7.2, 7.3, 8 and 9 RPMs

  Fixes fetching of x11-fonts/linux-urw-fonts

Allow to replace with an old package (useful in the portupgrade case).

Mega-patch to cleanup the ports infrastructure regarding our linux bits:
  - USE_LINUX now implies NO_FILTER_SHLIBS=yes. It also doesn't use FreeBSD
    tools to strip binaries anymore, so it's not neccesary anymore to override
    STRIP and STRIP_CMD.
  - USE_LINUX_PREFIX implies NO_MTREE now.
  - In the USE_LINUX case, USE_XLIB now depends upon the linux X11 libraries
    instead upon the native FreeBSD libraries.
  - The variable LINUX_BASE_PORT contains a string which is suitable as an
    item in *_DEPENDS, so if a port BATCH_DEPENDS or FETCH_DEPENDS upon the
    default (or overriden) linux base, ${LINUX_BASE_PORT} should be used
    instead of a hardcoded reference.
  - Change all ports to comply to the "new world order".
  - The Ports Collection now allows to override the default linux_base port.
    Specify e.g. OVERRIDE_LINUX_BASE_PORT=rh-9 in /etc/make.conf to use
    ${PORTSDIR}/emulators/linux_base-rh-9 (the logic is to use

Respect the user's USE_LINUX setting.

1. uses "ARCH" instead of "MACHINE_ARCH"
2. allow "ARCH" to be over-ridable.
3. fix ordering to better follow Mk/bsd.port.mk guidelines

XXX, I don't like setting "--ignorearch", but some ports just would not
install on amd64 w/o it.  Even with the 'ARCH' override, installing these
RPM's would complain about the system being the wrong architecture.

Say hello to the linux mega patch, it consolidates our linux bits a
little bit and allows to proceed to a more recent linux_base from
a stable (read as: the major bugs should be ironed out or identified
and most linux ports build just fine) source.

It also allows to ship 4.11 with a working linuxolator (the EOLed
linux_base is marked forbidden because of a security hole).

This is a major update, please read UPDATING (and CHANGES if you
develop linux ports).

Changes:
 - change the default linux_base from v7 to v8
 - add a newer freetype to linux_base-8 for nicer fonts display [1]
 - don't let cpio use hardlinks in the linux_base-8 port to quiet some

Allow slave ports to override DIST_SUBDIR.

PR:             74186
Submitted by:   Jin-Shang Tseng

Remove references to mirror.ac.uk

PR:             ports/69481
Submitted by:   Tim Bishop

SIZEify.

forced commit:  previous change was from

PR:             62682
Submitted by:   Volker Stolz of RWTH Aachen

The rpm executable is needed in do-install, so having it as I did
as "BUILD_DEPENDS?=" is illogical.  Instead use "BUILD_DEPENDS+=".

Bump PORTREVISION on all ports that depend on gettext to aid with upgrading.

(Part 1)

SIZEify.

Allow slave ports to set their own ONLY_FOR_ARCHS (fixes a problem
with my i386-only slave ports, noticed by kris in bento logs).

Make BUILD_DEPENDS changeable by slave ports.

Make MD5_FILE changeable by slave ports which install "noarch" RPMs.

Let slave ports set BASEVERSION and PLIST.

KATO mega patch

- ECHO -> ECHO_MSG

For some ports:
- pre-fetch -> pre-everything
- ECHO -> ECHO_CMD

PR:             ports/56820-56858
Submitted by:   KATO Tsuguru <tkato@prontomail.com>

After repo copy from graphics category to newly create multimedia
one, update all appropriate references (*_DEPENDS, comments, etc):

ports/graphics/libfame          -->     ports/multimedia/libfame
ports/graphics/libquicktime     -->     ports/multimedia/libquicktime
ports/graphics/mpeg             -->     ports/multimedia/mpeg
ports/graphics/mpeg_encode      -->     ports/multimedia/mpeg_encode
ports/graphics/mpeg_play        -->     ports/multimedia/mpeg_play
ports/graphics/mtv              -->     ports/multimedia/mtv
ports/graphics/smpeg            -->     ports/multimedia/smpeg
ports/graphics/totem            -->     ports/multimedia/totem
ports/graphics/transcode        -->     ports/multimedia/transcode
ports/graphics/xanim            -->     ports/multimedia/xanim
ports/graphics/xmps             -->     ports/multimedia/xmps

Repo copied by:         cvs (joe)
Approved by:            portmgr (self & no objections)

De-pkg-comment.

PORTREVISION should be PORTREVISION?=2, otherwise
PORTREVISION of satellite ports cannot be set.

Advised and approved by: knu (mentor)

MAINTEINER-suggested version up.

Install RPMs from RedHat 7.1 instead of RedHat 6.1.
Thanks to this upgrade, many ports (pips, bjfilter,..)
is internationalized without *-linux-locale port.
I have verified this modification imposed no fatal error to
the depending ports.

Submitted by:   Maintainer (taoka@FreeBSD.org)
Reviewed by:    ports-jp

Change from MASTER_SITES= to MASTER_SITES?=     to be able to overwrite in slave
ports    

Remove ftp.freesoftware.com from MASTER_SITES of ports since it no longer
exists.    

`rpm' and `rpm2cpio' have been repocopied from "misc" to "archivers".    

This port is a master port for a lot of ports whose maintainers are   different.
So "MAINTAINER=" should be "MAINTAINER?=".    

add missing files under /etc/gtk for i386.   remove directories if empty(note:
this port does not use mtree).    

NO_MTREE=yes, PREFIX=/compat/linux, RUN_DEPENDS=linux_base    -->
USE_LINUX_PREFIX=yes    

Ditch out "Version required" from comments section.    

The linux libc on alpha is /lib/libc.so.6.1 not /lib/libc.so.6    

Complete the Alpha package list.    

Add Alpha bits.    

Convert category x11-toolkits to new layout.  

Add some missing entries to PLIST:   	usr/lib/libgtk-1.2.so.0.5.0  
	usr/lib/libgtk-1.2.so.0    

Update MASTER_SITES to make distfile fetchable.