devel/gnome-vfs: remove

Dead upstream, no consumers left in the ports tree

all: Remove all other $FreeBSD keywords.

Remove # $FreeBSD$ from Makefiles.

Remove the dependency on hal

Gnome-vfs is almost unused now, HAL dependency has been dropped almost
everywhere

In preparation of the update of glib remove the -reference ports

Those ports mainly concern old Gnome2 libraries, the behaviour of this infra
is not compatible with the meson build system (being used in newer version)
the documentation is provided otherwise in the other version

Switch default version of samba from 4.7 to 4.8

With hat:	portmgr

Backout r493559

Bad grep foo sorry

Pointyhar:	bapt

Remove USE_GNOME=gnomemimedata which wasn't doing anything anymore

devel/gnome-vfs: Fix OpenSSL 1.1.X build

- Patch taken from NetBSD [1]
- Add gnome to USES

 [1]
http://cvsweb.netbsd.org/bsdweb.cgi/pkgsrc/sysutils/gnome-vfs/patches/patch-libgnomevfs_gnome-vfs-ssl.c?rev=1.1&content-type=text/x-cvsweb-markup

PR:		228896
Submitted by:	Nathan <ndowens@yahoo.com>
Reported by:	brnrd
Approved by:	gnome (maintainer timeout)
Obtained from:	NetBSD
MFH:		2018Q4

Switch default version of samba to 4.7
Samba 4.6 will be discontinued in a few weeks

Reviewed by:	mat
Differential Revision:	https://reviews.freebsd.org/D16904

- Completely ignore auto detect of sys/inotify.h
- Add LIB_DEPENDS to make Q/A happy

PR:		192724
Approved by:	maintainer timeout (2+ months)

security/openssl-devel: Mark ports broken cat devel

 - REASON from build log

Change default version of samba from 4.4 to 4.6

Reviewed by:	mat
With hat:	portmgr
Differential Revision:	https://reviews.freebsd.org/D13529

- Add LICENSE
- Update WWW

Approved by:	portmgr blanket

Switch default version of samba from 4.3 to 4.4

With hat:	portmgr
Differential Revision:	https://reviews.freebsd.org/D10131

- Add USES=samba to handle dependency on samba
  Valid ARGS:  build, env, lib, run (default: build,run)
- Add SAMBA_DEFAULT to bsd.default-versions.mk (default: 4.3)
- Remove obsolete samba36 ports
- Modify samba4x ports to install libsmbclient
- Convert the ports tree to USES=samba

Reviewed by:	mat
Differential Revision:	https://reviews.freebsd.org/D8919

Remove all USE_OPENSSL occurrences.

Sponsored by:	Absolight

Remove ${PORTSDIR}/ from dependencies, categories d, e, f, and g.

With hat:	portmgr
Sponsored by:	Absolight

The FreeBSD GNOME team proudly presents GNOME 3.16 for FreeBSD.

The offical GNOME 3.16 release notes can be found at
https://help.gnome.org/misc/release-notes/3.16/

Upgrade instructions for port users:

Delete the old tracker package with:
# pkg delete -f tracker
And user port upgrade tool of choice to upgrade.

Thanks to Antoine Brodin for running the exp-runs.

This release was made possible by the following people:
  Gustau Perez
  Ting-Wei_Lan

PR:		201980

By default libtool replaces -export-symbols <file> with -retain-symbols-file
<file> on ELF systems, but this doesn't really do what -export-symbols is
meant to do.  On GNU ELF systems it converts <file> to a simple version
script first and then uses -version-script instead of -retain-symbols-file.
Let USES=libtool patch libtool scripts to do this on all systems with GNU
ld(1).

Bump PORTREVISION on all ports where the build log contains -export-symbols.

audio/calf: This port builds a module that now exports only one function,
but it also builds a number of executables that link to this module and
expect to see other functions.  Because it's already a bit dodgy to link to
a module (libtool warns about this) let the module continue to export only
one function and instead build an ordinary library from the same source that
the executables can link to.  Fix a number of other issues in the same

Remove useless call of pkg-install script

Depend on update-mime-database instead of a file generated by pkg-install

Cleanup plist

Rename all patches that contain '::' as a path separator, and use
'__' instead.

Remove two libtool fixes from Mk/Uses/libtool.mk.  They don't always work
when an older version of a package is installed.  This is the case when an
executable links with installed libraries and with uninstalled libraries
that link with other uninstalled libraries.  For each of the directly
linked libraries the executable will have an rpath (/usr/local/lib for the
installed libraries and a path under WRKDIR for each of the uninstalled
libraries), but not for the indirect libraries.  Both ld(1) and rtld(1)
search the rpath of the executable first before any rpath of libraries, so
the indirectly linked libraries will be found in /usr/local/lib if they are
installed instead of in WRKDIR.

With this commit executables will overlink with uninstalled indirect
libraries again so their location is added to the rpath of the executable.

This partially reverts r358784.

PR:		191611
Approved by:	portmgr (bapt)

Remove zombie patch that somehow came back in r362251

Remove libtool .la files from all Qt ports

Approvedy by:	kde (makc)

Add 4 new sed commands to USES=libtool.  The first two apply some of the
changes that Debian made to their libtool.  The first command applies to
libtool versions 1.4 and up.  The second command is somewhat more elaborate
but essentially it uses the sed hold space to move an "elif...fi" block
down.  It applies to 2.x.  Together these reduce overlinking to unpatched
.la files (from ports that don't have USES=libtool yet but also .la files
in the work directory).

The third and fourth command fix relinking.  During staging libtool may
relink libA when it links to another library in the work directory libB.
The reason is that libA created during build phase has its runpath set to
the location of libB in the work directory.  This allows running an
executable that links to libA from within the work directory.  The relink
removes this extra runpath.

When linking a library libA with a library libB using libtool, if libB.la
exists, libtool will add all libraries libB.la refers to (dependency_libs
field) to the linker command line and store them in the dependency_libs
field of libA.la.  So everything that subsequently links with libA will also
link to these extra libraries.  This causes too much overlinking.

This commit modifies Mk/Uses/libtool.mk so it empties the dependency_libs
field in .la libraries during staging.  However, because .la libraries have
very limited use when dependency_libs is empty it makes sense to completely
remove them during staging.

So with this commit USES=libtool is modified to remove .la libraries and a
new form (USES=libtool:keepla) is introduced in case they need to be kept
(dependency_libs is still emptied).

Support stage

Convert the tree to USES=fam

Approved by:	portmgr (bapt)

Add NO_STAGE all over the place in preparation for the staging support (cat:
devel part 2)

Add an explicit dependency on pkgconf

Make these ports build with glib 2.36

- Convert USE_GETTEXT to USES (part 4)

Approved by:	portmgr (bapt)

Convert almost all gnome@ ports to OptionsNG, trim header, use USES=pathfix
instead of gnomehack and pet portlint.
Add conflicts with future gnome3 versions.

Reviewed by:	miwi, bapt

- Get rid of PTHREAD_CFLAGS and PTHREAD_LIBS (category: devel)

Approved by:	portmgr

Always disable inotify no matter what if even you have devel/libinotify
installed. We are using our own, kevent.

PR:		ports/173884
Reported by:	Petr Bohac <bohacpetr@bohyn.cz>

- update png to 1.5.10

- Add LDFLAGS to CONFIGURE_ENV and MAKE_ENV (as it was done with LDFLAGS)
- Fix all ports that add {CPP,LD}FLAGS to *_ENV to modify flags instead

PR:             157936
Submitted by:   myself
Exp-runs by:    pav
Approved by:    pav

-remove MD5

Sync to new bsd.autotools.mk

Presenting GNOME 2.32.1 for FreeBSD. The offical release notes for this
release can be found at http://library.gnome.org/misc/release-notes/2.32/

This will be the last release of the GNOME 2.x series, mainly a bugfix and
bridge release to the first release of the GNOME 3.x series.

This release features commits by avl, marcus, mezz and myself.

The FreeBSD GNOME Team would like to thank the following contributors and
testers for there help with this release:

Zane C.B. <vvelox@vvelox.net>
romain@
Olaf Seibert <O.Seibert@cs.ru.nl>
DomiX

Bump PORTREVISION and add USE_GETTEXT where missing.

PR:             147257

Presenting GNOME 2.30.1 for FreeBSD. The offical release notes for this
release can be found at http://library.gnome.org/misc/release-notes/2.30/ .

This release brings initial PackageKit support, Upower (replaces power
management part of hal), cuse4bsd integration with HAL and cheese, and a
faster Evolution.

Sadly GNOME 2.30.x will be the last release with FreeBSD 6.X support. This
will also be the last of the 2.x releases. The next release will be the
highly-anticipated GNOME 3.0 which will bring with it a new UI experience.

Currently, there are a few bugs with GNOME 2.30 that may be of note for our
users. Be sure to consult the UPGRADING note or the 2.30 upgrade FAQ at
http://www.freebsd.org/gnome/docs/faq230.html for specific upgrading
instructions, and the up-to-date list of known issues.

- update to 1.4.1
Reviewed by:    exp8 run on pointyhat
Supported by:   miwi

Fix the build with the new libz.

Reported by:    avl

- update to jpeg-8

Remove the check to see if bind has been installed from ports.  This is
no longer relevant to modern versions of FreeBSD and bind.

Reported by:    Kevin Oberman <oberman@es.net>

Presenting GNOME 2.28.1 for FreeBSD.  The official release notes for this
release can be found at http://library.gnome.org/misc/release-notes/2.28/ .
Officially, this is mostly a polishing release in preparation for GNOME 3.0
due in about a year.

On the FreeBSD front, though, a lot went into this release.  Major thanks
goes to kwm and avl who did a lot of the porting work for this release.
In particular, kwm brought in Evolution MAPI support for better Microsoft
Exchange integration.  Avl made sure that the new gobject introspection
repository ports were nicely compartmentalized so that large dependencies
aren't brought in wholesale.

But, every GNOME team member (ahze, avl, bland, kwm, mezz, and myself)
contributed to this release.

Make hal support optional (default on).

PR:             137364
Submitted by:   "Carlos A. M. dos Santos" <unixmania@gmail.com>

-Repocopy devel/libtool15 -> libtool22 and libltdl15 -> libltdl22.
-Update libtool and libltdl to 2.2.6a.
-Remove devel/libtool15 and devel/libltdl15.
-Fix ports build with libtool22/libltdl22.
-Bump ports that depend on libltdl22 due to shared library version change.
-Explain what to do update in the UPDATING.

It has been tested with GNOME2, XFCE4, KDE3, KDE4 and other many wm/desktop
and applications in the runtime.

With help:      marcus and kwm
Pointyhat-exp:  a few times by pav
Tested by:      pgollucci, "Romain Tartière" <romain@blogreen.org>, and
                a few MarcusCom CVS users. Also, I might have missed a few.
Repocopy by:    marcus
Approved by:    portmgr

- bump all port that indirectly depends on libjpeg and have not yet been bumped
or updated
Requested by:   edwin

Update to 2.24.1.

- Use GNOME macro instead of ${MASTER_SITE_GNOME}, remove
  MASTER_SITE_SUBDIR when possible.

PR:             ports/125243
Submitted by:   pgollucci
Reworked by:    myself
Tested on:      pointyhat exp-run (pav)

Presenting GNOME 2.24 for FreeBSD.

See http://library.gnome.org/misc/release-notes/2.24/ for the general
release notes.  On the FreeBSD front, this release introduces Fuse support
in HAL, adds multi-CPU support to libgtop, WebKit updates, and fixes some
long-standing seahorse and gnome-keyring bugs.  The documentation updates
to the website are forthcoming.

This release features commits by adamw, ahze, kwm, mezz, and myself.  It would
not have been possible without are contributors and testers:

Alexander Loginov
Craig Butler [1]
Dmitry Marakasov [6]
Eric L. Chen

Bump portrevision due to upgrade of devel/gettext.

The affected ports are the ones with gettext as a run-dependency
according to ports/INDEX-7 (5007 of them) and the ones with USE_GETTEXT
in Makefile (29 of them).

PR:             ports/124340
Submitted by:   edwin@
Approved by:    portmgr (pav)

- Remove unneeded dependency from gtk12/gtk20 [1]
- Remove USE_XLIB/USE_X_PREFIX/USE_XPM in favor of USE_XORG
- Remove X11BASE support in favor of LOCALBASE or PREFIX
- Use USE_LDCONFIG instead of INSTALLS_SHLIB
- Remove unneeded USE_GCC 3.4+

Thanks to all Helpers:
        Dmitry Marakasov, Chess Griffin, beech@, dinoex, rafan, gahr,
        ehaupt, nox, itetcu, flz, pav

PR:             116263
Tested on:      pointyhat
Approved by:    portmgr (pav)

The FreeBSD GNOME team is proud to annunce the release of GNOME 2.22.0 for
FreeBSD.  The official GNOME 2.22 release notes can be found at
http://library.gnome.org/misc/release-notes/2.22/ .  On the FreeBSD front,
this release features an updated hal port with support for video4linux
devices, DRM (Direct Rendering), and better support of removable media.  Work
is also underway to tie webkit more closely into GNOME.  As part of the
GNOME 2.22 upgrade, GStreamer received a rather large upgrade as well.
Be sure to consult UPDATING on the proper steps to upgrade all of your
GNOME ports.

This release would not have been possible without the contributions and
testing efforts of the following people:

Pawel Worach
kan
edwin
Peter Ulrich Kruppa
J. W. Ballantine
Yasuda Keisuke
Andriy Gapon

It only needs to depend on avahi-app.

PR:             ports/119030
Submitted by:   "Dima Panov" <fluffy@fluffy.khv.ru>

Update to 2.20.1.

Presenting GNOME 2.20.1 and all related works for FreeBSD.  The official
GNOME 2.20 release notes can be found at
http://www.gnome.org/start/2.20/notes/en/ .  Beyond that, this update
includes the new GIMP 2.4 (courtesy of ahze).

The GNOME 2.20 update also includes a huge change in the FreeBSD GNOME
hierarchy.  We are now using the more standard DATADIR of ${PREFIX}/share
rather than ${PREFIX}/share/gnome. The result is that fewer patches and
hacks are needed to port GNOME components to FreeBSD.  This will mean some
user changes may be required, so be sure to read /usr/ports/UPDATING for
more details.

This release and the things we accomplished in it would not have been
possible without mezz's crazy idea to collapse DATADIR, and his persistence
to make it happen successfully.  Ahze and pav also deserve thanks for

Silence Kerberos check lines from being echoed.

Add a check for WITHOUT_KERBEROS, and trigger an error during make configure.
Kerberos support is required for gnome-vfs and other GNOME components.

PR:             114838
Suggested by:   Steven G. Kargl <kargl@troutmask.apl.washington.edu>

- Fix post-patch (unbalanced quotes)

Approved by:    portmgr (implicit)

Remove support for a separate X11BASE.

Approved by:    portmgr (implicit)

- Welcome X.org 7.2 \o/.
- Set X11BASE to ${LOCALBASE} for recent ${OSVERSION}.
- Bump PORTREVISION for ports intalling files in ${X11BASE}.

Update to 2.18.1.

Presenting GNOME 2.18 for FreeBSD.  GNOME 2.18 is a departure from recent GNOME
releases in that it focuses more on stability and functionality than on
new features.  Not that it doesn't have its share of new and exciting
items.  See http://www.gnome.org/start/2.18/ for all the goodies in
this release.

GNOME 2.18 for FreeBSD would not have been possible without the hard work
of the FreeBSD GNOME Team and our intrepid band of testers including
J. W. Ballantine, Pawel Worach, Yasuda Keisuke, Pascal Hofstee, miwi,
Yoshihiro Ota, Vladimir Grebenschikov, Jukka A. Ukkonen,
Phillip Neumann, Franz Klammer, and Neal Delmonico.

Update to 2.16.3

- Fix PTHREAD_LIBS in .pc files

-Update to 2.16.2

The reference port does not need hal.

Presenting GNOME 2.16.1 for FreeBSD.  This release represents a massive
amount of work by the FreeBSD GNOME Team and our testers.

On top of the usual GNOME update, we have taken this opportunity to move
GNOME from X11BASE to LOCALBASE.  This means roughly 600 ports NOT part of
the GNOME Desktop also need to be changed.  The bulk of the move was carried
out by ahze, mezz, and pav, but it would not have been possible without
cooperation from the FreeBSD KDE team who worked with us to make sure
GNOME and KDE can still coexist happily.  We would also like to send a
shout out to kris and pointyhat for putting up with multiple test runs
until we got something that was solid.

Back to GNOME 2.16.  This release brings a huge amount of new functionality
to FreeBSD.  The standard release notes can be read at
http://www.gnome.org/start/2.16/ .  But on top of what you will read there,

- Add header in these *-reference ports.
- Fix a few of pkg-descr by chase the rename.
- Move all PORTREVISION and PORTEPOCH to top with ?=.
- Put USE_X_PREFIX back in, but under REFERENCE_PORT, and remove PREFIX? and
  USE_XLIB. This fix ports to use the correct mtree when you change the prefix,
  for example:

        Incorrect: (Without USE_X_PREFIX)
        ================================
        # cd /usr/ports/x11-toolkits/gtk20
        # make -V MTREE_FILE
        /etc/mtree/BSD.x11-4.dist
        # make PREFIX=/tmp/foo -V MTREE_FILE
        /etc/mtree/BSD.local.dist <-- Here...
        ================================

Remove a double of PORTREVISION, now it actually bump.

Correct a potential symbol conflict between the xdgmime functions in gtk+
and those in gnome-vfs.  This problem would manifest itself by screwing
up MIME types for various files, and causing GTK+ filtered file choosers
not to display contents correctly.

- Update to 2.14.2

- Rename ports

  devel/gnomevfs -> devel/gnome-vfs1
  devel/gnomevfs2 -> devel/gnome-vfs
  devel/gnomevfs2-reference -> devel/gnome-vfs-reference