devel/libgsf: Update to 1.14.53

PR:		283518

devel/libgsf: Update to 1.14.52

* Rework Makefile and modernize it

Changelog:
https://gitlab.gnome.org/GNOME/libgsf/-/blob/LIBGSF_1_14_52/ChangeLog

PR:		281161
Approved by:	desktop (arrowd)

devel/libgsf: Moved man to share/man

Approved by:    portmgr (blanket)

Remove WWW entries moved into port Makefiles

Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.

This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.

Approved by:		portmgr (tcberner)

Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.

devel/libgsf: update to 1.14.50 release (+)

Changes:
 * Fix error handling problem when writing ole files.

devel: remove 'Created by' lines

A big Thank You to the original contributors of these ports:

  *  "Waitman Gobble" <uzimac@da3m0n8t3r.com>
  *  <jkoshy@FreeBSD.org>
  *  Aaron Dalton <aaron@FreeBSD.org>
  *  Aaron Dalton <aaron@daltons.ca>
  *  Aaron H. K. Diep <ahkdiep@gmail.com>
  *  Aaron Hurt <ahurt@anbcs.com>
  *  Abel Chow <abel_chow@yahoo.com>
  *  Adam McLaurin
  *  Adam Saponara <as@php.net>
  *  Adam Weinberger <adamw@FreeBSD.org>
  *  Ade Lovett <ade@FreeBSD.org>

devel/libgsf: update to 1.14.49

textproc/libxml2: bump all LIB_DEPENDS consumers

This is a separate commit to facilitate easier cherry-picking for
quarterly.

PR: 262853, 262940, 262877, 263126
Approved by: fluffy (mentor)

textproc/libxml2: bump all dependencies

This should make sure that all dependent ports will pick
up the new version commited with a13ec21cd733f67a9fc0dc00ab45268bdc236246

devel/libgsf: Add CPE information

Approved by:	portmgr (blanket)

Remove # $FreeBSD$ from Makefiles.

Move some gnome@ ports to desktop@

As gnome@ is lacking active committers at the moment, transfer some of its
ports [1] up the stack to the desktop@ group, in hope that this way we get some
updates in as the set of people that "should feel responsible" grows.

As soon as gnome@ grows some committers again, this can (and should) of course
be reverted again.

[1] The list of ports chosen in this move consits of all the ports that are
required to build x11/kde5.

Approved by:	portmgr (bapt)
Differential Revision:	https://reviews.freebsd.org/D26362

devel/libgsf: add NLS option

PR:		248062
Submitted by:	Andrew Romanenko <melanhit@gmail.com>

Update to 1.4.47

Update to 1.14.46

Update libgsf to 1.14.44.

* Add license
* add WWW in pkg-descr

Update to 1.14.41

Update libgsf to 1.14.36.

Update libgsf to 1.14.34.

Update libgsf to 1.14.33.

Update libgsf to 1.14.32.

Obtained from:	GNOME devel repo

Really enable introspection support.

PR:		196601
Submitted by:	olivierd@

Update to 1.14.30.

Convert to USES=libtool and add INSTALL_TARGET=install-strip

Obtained from:	gnome-dev

Convert a bunch of USE_XZ to USES=tar:xz.

Approved by:	portmgr (not really, but touches unstaged ports)

The FreeBSD x11@ and graphics team proudly presents
a zeising, kwm production, with help from dumbbell, bdrewery:

NEW XORG ON FREEBSD 9-STABLE AND 10-STABLE

This update switches over to use the new xorg stack by default on FreeBSD 9
and 10 stable, on osversions where vt(9) is available.
It is still possible to use the old stack by specifying WITHOUT_NEW_XORG in
/etc/make.conf .
FreeBSD 8-STABLE and released versions of FreeBSD still use
the old version.
A package repository with binary packages for new xorg will
be available soon.

This patch also contains updates of libxcb and related ports, pixman, as well

Update to 1.4.28.

Add gdkpixbuf2 to depend [1], also sort USE_GNOME.
Enable stage support.

PR:		ports/181727
Submitted by:	pawel@

Add NO_STAGE all over the place in preparation for the staging support (cat:
devel part 3)

Switch to USES=gmake , and USE_GNOME=introspection:build

Obtained from:	GNOME dev repo

Update to 1.14.27.

Fix plist

Submitted by:	QaT

Update to 1.14.26.

Remove py-libgsf and libgsf-gnome which where removed
Obtained from:	GNOME stage repo

- Convert USE_GETTEXT to USES (part 3)

Approved by:	portmgr (bapt)

Unbreak libgsf-gnome by making sure the PLIST_FILES line only applies to libgsf
itself.

Reported by:	build runs (by miwi)

- Convert to OptionsNG, explicitly pass --without-gconf if GCONF is disabled
- Drop leading indefinite article from COMMENT, i/o -> I/O
- Since PLIST_SUB was covering just one file, turn it into PLIST_FILES+=

Approved by:	mezz (on behalf of gnome)

- update png to 1.5.10

- Get rid FreeBSD 6 support

- Add LDFLAGS to CONFIGURE_ENV and MAKE_ENV (as it was done with LDFLAGS)
- Fix all ports that add {CPP,LD}FLAGS to *_ENV to modify flags instead

PR:             157936
Submitted by:   myself
Exp-runs by:    pav
Approved by:    pav

Update to 1.14.21.

PR:             ports/157743
Submitted by:   Zhihao Yuan <lichray@gmail.com>

Update to 1.14.20.

Sync to new bsd.autotools.mk

Update to 1.14.19.

Bump PORTREVISION and add USE_GETTEXT where missing.

PR:             147257

- Mark libgsf-gnome as BROKEN on 6.X: does not configure

Reported by:    pointyhat

Presenting GNOME 2.30.1 for FreeBSD. The offical release notes for this
release can be found at http://library.gnome.org/misc/release-notes/2.30/ .

This release brings initial PackageKit support, Upower (replaces power
management part of hal), cuse4bsd integration with HAL and cheese, and a
faster Evolution.

Sadly GNOME 2.30.x will be the last release with FreeBSD 6.X support. This
will also be the last of the 2.x releases. The next release will be the
highly-anticipated GNOME 3.0 which will bring with it a new UI experience.

Currently, there are a few bugs with GNOME 2.30 that may be of note for our
users. Be sure to consult the UPGRADING note or the 2.30 upgrade FAQ at
http://www.freebsd.org/gnome/docs/faq230.html for specific upgrading
instructions, and the up-to-date list of known issues.

- update to 1.4.1
Reviewed by:    exp8 run on pointyhat
Supported by:   miwi

Update to 1.14.17.

- update to jpeg-8

Update to 1.14.16.

-Repocopy devel/libtool15 -> libtool22 and libltdl15 -> libltdl22.
-Update libtool and libltdl to 2.2.6a.
-Remove devel/libtool15 and devel/libltdl15.
-Fix ports build with libtool22/libltdl22.
-Bump ports that depend on libltdl22 due to shared library version change.
-Explain what to do update in the UPDATING.

It has been tested with GNOME2, XFCE4, KDE3, KDE4 and other many wm/desktop
and applications in the runtime.

With help:      marcus and kwm
Pointyhat-exp:  a few times by pav
Tested by:      pgollucci, "Romain Tartière" <romain@blogreen.org>, and
                a few MarcusCom CVS users. Also, I might have missed a few.
Repocopy by:    marcus
Approved by:    portmgr

- bump all port that indirectly depends on libjpeg and have not yet been bumped
or updated
Requested by:   edwin

Update to 1.14.15.

Update to 1.14.14.

Update to 1.4.13.

Update to 1.4.12.

- Fix slave ports build after my last change.

Pointy hat to:  me

- Make gconf dependency optional by knob.

Approved by:    gnome (marcus)

Presenting GNOME 2.24 for FreeBSD.

See http://library.gnome.org/misc/release-notes/2.24/ for the general
release notes.  On the FreeBSD front, this release introduces Fuse support
in HAL, adds multi-CPU support to libgtop, WebKit updates, and fixes some
long-standing seahorse and gnome-keyring bugs.  The documentation updates
to the website are forthcoming.

This release features commits by adamw, ahze, kwm, mezz, and myself.  It would
not have been possible without are contributors and testers:

Alexander Loginov
Craig Butler [1]
Dmitry Marakasov [6]
Eric L. Chen

Bump portrevision due to upgrade of devel/gettext.

The affected ports are the ones with gettext as a run-dependency
according to ports/INDEX-7 (5007 of them) and the ones with USE_GETTEXT
in Makefile (29 of them).

PR:             ports/124340
Submitted by:   edwin@
Approved by:    portmgr (pav)

- Remove unneeded dependency from gtk12/gtk20 [1]
- Remove USE_XLIB/USE_X_PREFIX/USE_XPM in favor of USE_XORG
- Remove X11BASE support in favor of LOCALBASE or PREFIX
- Use USE_LDCONFIG instead of INSTALLS_SHLIB
- Remove unneeded USE_GCC 3.4+

Thanks to all Helpers:
        Dmitry Marakasov, Chess Griffin, beech@, dinoex, rafan, gahr,
        ehaupt, nox, itetcu, flz, pav

PR:             116263
Tested on:      pointyhat
Approved by:    portmgr (pav)

Update to 1.14.8.

Update to 1.14.7.

Forgot to do the 'cvs rm' on this file.

Update to 1.14.6.

One more PORTREVISION bump to ensure everyone gets the GConf schemas installed.

Fix path to the patch file.  Funny enough, make patch worked without this.

Remove a REINPLACE hunk that snuck in.

Reported by:    Herbert J. Skuhra <h.skuhra@gmail.com>

Correct distfile generation, and re-enable GConf schema installation.
The thumbnailer will not work without it.  Since this should be temporary,
I did did not add build depends on the autotools, but basically, I did:

aclocal19 -I m4 -I /usr/local/share/aclocal
autoconf259 -I m4 -I /usr/local/share/aclocal
automake19

Then I diff'd the files that required modification for GConf to work.

Disable the GCONF_SCHEMAS for now, the gconf stuff is broke. I have reported
in its bugzilla.

Reported by:    a few

-Update to 1.14.5.
-Clean up in CONFIGURE_ARGS by remove these that are taken care by gnomeprefix.
-Remove an empty of GCONF_SCHEMAS in libgsf-gnome.

Correct the plist.

Reported by:    Mike Harding <mharding@edentreetech.com>

Update to 1.14.4.

- Welcome X.org 7.2 \o/.
- Set X11BASE to ${LOCALBASE} for recent ${OSVERSION}.
- Bump PORTREVISION for ports intalling files in ${X11BASE}.

Update to 1.14.3

Presenting GNOME 2.16.1 for FreeBSD.  This release represents a massive
amount of work by the FreeBSD GNOME Team and our testers.

On top of the usual GNOME update, we have taken this opportunity to move
GNOME from X11BASE to LOCALBASE.  This means roughly 600 ports NOT part of
the GNOME Desktop also need to be changed.  The bulk of the move was carried
out by ahze, mezz, and pav, but it would not have been possible without
cooperation from the FreeBSD KDE team who worked with us to make sure
GNOME and KDE can still coexist happily.  We would also like to send a
shout out to kris and pointyhat for putting up with multiple test runs
until we got something that was solid.

Back to GNOME 2.16.  This release brings a huge amount of new functionality
to FreeBSD.  The standard release notes can be read at
http://www.gnome.org/start/2.16/ .  But on top of what you will read there,

Update to 0.14.1.

Presenting GNOME 2.14.1 for FreeBSD!  Checkout
http://www.gnome.org/start/2.14/ for the official release notes, and a list
of all the gooides in this new release.  In particular, GNOME 2.14 focused
on performance, and they did not miss the mark.  There's some new eye candy,
but most of the big things are waiting until GNOME 2.16.  On the FreeBSD
side, we tried to clean up all the crashers we could.  In particular, we
really improved GNOME's 64-bit support.

The good news is that this release does not bring any big shared library
version bumps, so you can almost do a simple portupgrade to get to 2.14.
There are a few minor gotchas that will be documented in UPDATING shortly.

The FreeBSD GNOME Team would like th thank the following users for their
patches, feedback, and sometimes incessant complaing about crashes (you
know who you are).

Conversion to a single libtool environment.

Approved by:    portmgr (kris)

Be sure to use the standard GConf source.

- Add SHA256 checksums

- Update to 1.13.3

Presenting GNOME 2.12 for FreeBSD.  The release is chock full of bug fixes
and new features.  Don't believe me?  Then see for yourself at
http://www.gnome.org/start/2.12/notes/en/.

DO NOT USE portupgrade by itself to upgrade to GNOME 2.12.  Instead, use
the gnome_upgrade.sh script from
http://www.marcuscom.com/downloads/gnome_upgrade212.sh.  This script will
circumvent some potential pitfalls users can see if they use portupgrade
by itself.

In keeping with tradition, GNOME 2.12 for FreeBSD comes with a special
splash screen.  The winner of this release's contest is
Dominique Goncalves <dominique.goncalves@gmail.com>.  His splash screen
was inspired by http://art.gnome.org/contests/2.12-splash/83.

Set PORTREVISION with a ?= so the slave port doesn't pick it up.

Bump PORTREVISION for bzip2 fix since this will require packages built
with the old dependency to be rebuilt.

Fix a bzip2 dependency now that the shared lib versions have been bumped
in 6.X and 7.X.

Presenting GNOME 2.10 for FreeBSD!

The release notes can be found at
http://www.gnome.org/start/2.10/notes/rnwhatsnew.html, and will give you a
good idea of what has gone into this release overall.  However, a lot of
FreeBSD specific additions and fixes have been made.  For example, this
release offers fixed ACPI support as well as new CPU freqeuncy monitoring
support.  See the FreeBSD GNOME 2.10 upgrade page at
http://www.FreeBSD.org/gnome/docs/faq210.html for the entire list as well
as a list of known issues and upgrade instructions.

GNOME 2.10, as well as all of our releases, would not be possible without
the great team that goes into porting and testign each and every component.
Thanks definitely goes out to ahze, adamw, bland, kwm, mezz, and pav for all
their work.  We would also like to thank our adventurous users that chose to

Update to 1.10.1.

Apply a big libtool patch to allow porters to use the libtool installed by
the libtoolX ports instead of the one included with each port.  Ports that
set USE_LIBTOOL_VER=X will now use the ports version of libtool instead of
the included version.  To restore previous behavior, use the new macro,
USE_INC_LIBTOOL_VER.  Both macros accept the same argument: a libtool version.

For example, to use the ports version of libtool-1.5, add the following to
your Makefile:

USE_LIBTOOL_VER=        15

To use the included version of libtool with extra hacks provided by
libtool-1.5, add the following to your Makefile:

USE_INC_LIBTOOL_VER=    15

With this change, ports that had to add additional libtool hacks to prevent
.la files from being installed or to fix certain threading issues can now
delete those hacks (after appropriate testing, of course).

PR:             63944
Based on work by:eik and marcus
Approved by:    ade (autotools maintainer)
Tested by:      kris on pointyhat
Bound to be hidden problems:    You bet

Update to 1.10.0.

- Split libgsf port to two standalone ports:
  * devel/libgsf is the old port minus gsf-gnome bits
  * devel/libgsf-gnome contains libgsf-gnome-1 library and it's header files
  This greatly reduces number of dependencies for ports that was using only
  non-gnome part of this library.
- Point USE_GNOME parameter libgsf to GNOME-less port and create new parameter
  libgsf_gnome for libgsf-gnome port.
- Convert all consumers of libgsf-gnome-1 library to depend on libgsf-gnome
  port (read all as: Gnumeric)

PR:             ports/63851 (in the spirit of)
Submitted by:   Sybolt de Boer <sybolt@xs4all.nl>
Prodded by:     lofi (KDE team)
Reviewed by:    marcus (GNOME team)

Update to 1.9.1.

Update to 1.9.0

Chase the glib20 update, and bump all affected ports' PORTREVISIONs.

- Add SIZE to GNOME ports

Submitted by:   trevor

Whoa there, boy, that's a mighty big commit y'all have there...

Begin autotools sanitization sequence by requiring ports to explicitly
specify which version of {libtool,autoconf,automake} they need, erasing
the concept of a "system default".

For ports-in-waiting:

        USE_LIBTOOL=YES         ->      USE_LIBTOOL_VER=13
        USE_AUTOCONF=YES        ->      USE_AUTOCONF_VER=213
        USE_AUTOMAKE=YES        ->      USE_AUTOMAKE_VER=14

Ports attempting to use the old style system after June 1st 2004 will be
sorely disappointed.

Bump PORTREVISION on all ports that depend on gettext to aid with upgrading.

(Part 2)

Update to 1.8.2.

Obtained from:  marcuscom

Udpate to 1.8.1.

Update to 1.8.0.