math/octave: Update to 9.4.0.

*/*: bump PORTREVISION after OpenBLAS upgrade

Remark: this souldn’t be necessary, because the version of the library is the
same, but due to many changes between these releases, it is safer this way.

PR:		284314

math/octave: fix build on armv7

Restore a patch due to mikael@ that was mangled in a previous update.

Fixes:		6473aac25b6dc63be299faa4fc1ed9cde77f1957
Approved by:	portmgr (build fix blanket)
MFH:		2025Q1
PR:		223277

*/*: bump PORTREVISION to chase blas/lapack, Suitesparse and BLIS

*/*: bump PORTREVISION after the upgrade to Suitesparse

Mk/**java.mk: Convert bsd.java.mk to USES

The following features have been added or changed:
- Instead of USE_JAVA use USES=java. This defaults to
  USES=java:build,run if NO_BUILD is undefined. Else it defaults to
  USES=java:run
- Instead of USE_ANT=yes use USES=java:ant which also implies
  USES=java:build
- Instead of JAVA_BUILD=yes use USES=java:build. Does not imply run or
  extract
- Instead of JAVA_EXTRACT=yes use USES=java:extract does not imply
  build or run
- Instead of JAVA_RUN=yes use USES=java:run does not imply extract or
  build
- Instead of USE_JAVA=<version> use USES=java and JAVA_VERSION=<version>

Approved by: mat (portmgr), glewis
Differential Revision:  https://reviews.freebsd.org/D48201

math/sundials: update 6.6.0 → 7.2.1

math/octave: Update to 9.3.0.

*/*: Chase devel/qscintilla2 flavorization

devel/qscintilla2*: Flavorize ports

*/*: bump PORTREVISION after the upgrade to OpenBLAS

math/octave: Use QT Version 6.

Bump portrevision.

PR:		279819
Reported by:	Joel Bodenmann <jbo@FreeBSD.org>

math/octave: Update to 9.2.0.

*/*: chase SuiteSparse’s upgrade

math/octave: Update to 9.1.0.

math/octave-forge: Bump portrevision.
Mark broken and set optional dependency to off in math/octave-forge:

math/octave-forge-bioinfo
math/octave-forge-coder
math/octave-forge-financial
math/octave-forge-fits
math/octave-forge-fuzzy-logic-toolkit
math/octave-forge-gnuplot
math/octave-forge-informationtheory
math/octave-forge-irsa
math/octave-forge-level-set
math/octave-forge-nnet
math/octave-forge-plot
math/octave-forge-queueing
math/octave-forge-symband

benchmarks/autobench: Moved man to share/man

Approved by:    portmgr (blanket)

math/octave: Moved man to share/man

Approved by:    portmgr (blanket)

*/*: bump PORTREVISION after the upgrade to SuiteSparse

*/*: bump PORTREVISION after the upgrade of SuiteSparse to v7.5.0

math/octave: FIX PLIST WITH QT5=OFF

Bump portrevision.

PR:		276060
Reported by:	tcberner@

*/*: chase the upgrade of SuiteSparse

*/*: bump PORTREVISION after the upgrade of OpenBLAS

PR:		273219

math/octave: Update to 8.4.0.

*/*: bump portrevision to chase CHOLMOD’s upgrade

*/*: chase the upgrade of CHOLMOD

*/*: chase the upgrade of SuiteSparse

math/octave: Fix plist for DOCS=off.

/*: bump PORTREVISION after the upgrade of SuiteSparse

math/octave: Update to 8.3.0.

math/octave: Fix build.

Necessitated by recent update of suitesparse.

*/*: bump PORTREVISION after the upgrade of SuiteSparse

*: Bump PORTREVISIONs for math/mpc update to 1.3.1

math/octave: Update to 8.2.0.

math/octave: Update to 8.1.0.

Bump portrevision of all dependent ports.

Mark broken math/octave-forge-database, math/octave-forge-mechanics,
math/octave-forge-mpi math/octave-forge-nlwing2,
math/octave-forge-parallel, math/octave-forge-specfun

Set to default off these ports in math/octave-forge.

Clean up indentation in Mk/Uses/octave.mk.

math/octave: Cope with API differences between SuiteSparse versions

Obtained from:	https://hg.octave.org/octave/rev/aaffac4fbe30

math/suitesparse*: bump PORTREVISION of dependant ports

Mk/**octave.mk: Convert to USES=octave

As part of the improvements of USES infrastructure Mk/bsd.octave.mk has
been converted to Mk/Uses/octave.mk. This also declutters some old
stuffs in the octave-* ports and makes it simpler to add more
octave-forge ports easily.

While I am here make all the ports portclippy/portfmt compliant. And use
USES macros whenever possible.

Reviewed by:	portmgr
Approved by:	tcberner
Differential Revision:	https://reviews.freebsd.org/D37887

Mk/**tex.mk: Convert bsd.tex.mk to USES=tex

- Update all the consumers to use USES=tex
- USE_TEX=yes is the old way of writing USES=tex which has been removed
  and replaced in all ports
- Almost all of the USE_TEX features remains unchanged
- Some consumers had the same variables defined both in the mk
  infrastructure and also in the ports which have been removed from the
  ports as those are redundant.

In case any of the consumers are failing to build please make sure that
the nexessary USES=tex is there. Unlike previous USE_TEX=yes will no
longer load the required VARS for tex and related dependencies.

Reviewed by:	portmgr
Approved by:	portmgr (blanket)

*/*: bump PORTREVISION after the upgrade of math/suitesparse*

PR:		267742

math/octave: Update to 7.3.0.

Mk/Uses: always use colon for build/run suffix

Most USES use a colon for build/run(/test) suffixes. Change kde.mk,
qt.mk and pyqt.mk to do the same, and update all ports using that.

Document in CHANGES.

PR:			266034
Exp-run by:		antoine
Approved by:		tcberner (mentor)
Differential Revision:	https://reviews.freebsd.org/D36349

Remove WWW entries moved into port Makefiles

Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.

This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.

Approved by:		portmgr (tcberner)

Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.

math/octave: Update to 7.2.0.

science/hdf5: bump PORTREVISION of consumers

The SO-version increased in the update to 1.12.2 in
a43418b81530f7e897abfbe18dd59f44265a1a0f .

Reported by:	VVD <vvd@unislabs.com>

math: remove 'Created by' lines

A big Thank You to the original contributors of these ports:

  *  Aaron Dalton <aaron@FreeBSD.org>
  *  Aaron Dalton <aaron@daltons.ca>
  *  Alessando Sagratini <ale_sagra@hotmail.com>
  *  Alex Dupre <ale@FreeBSD.org>
  *  Alexey Dokuchaev <danfe@FreeBSD.org>
  *  Amarendra Godbole <amarendra.godbole@gmail.com>
  *  Anders Nordby <anders@FreeBSD.org>
  *  Andreas Fehlner (fehlner@gmx.de)
  *  Andrew L. Neporada <andrew@chg.ru>
  *  Andrey <gugu@zoo.rambler.ru>
  *  Andrey Zakhvatov

math/sundials: Update 5.7.0 -> 6.2.0

math/octave: Corrections to pkg-plist when options are changed.

PR:		264263
Reported by:	watcom

math/octave: Fix plist with DOCS=OFF.

math/octave: Remove crud.

math/octave: fix pkg-plist.

- This installed a number of files whose path name is derived from the
  directory in which the port is built.  This is a band-aid fix which
  deletes those files.  This will enable the installation to work if the
  ports directory is something other than /usr/ports.

Reported by:	pkg-fallout@

math/octave: commits that should have accompanied cc8553afd083.

math/octave: Update to 7.1.0.

- Bump portrevision of dependent */octave-forge-* ports.
- Make math/octave-forge-sparsersb broken.
- Default SPARSERSB to OFF in math/octave-forge and bump portrevision.

devel/qscintilla-qt5: Update to 2.13.2

Change:
  - https://riverbankcomputing.com/news/QScintilla_2.13.2_Released

math/qhull: Renaming ports

qhull renamed to qhull7.
qhull8 renamed to qhull.
qhull7 marked deprecated.
Dependencies updated.

math/octave: switch to Qhull8

Patch obtained from https://savannah.gnu.org/bugs/download.php?file_id=51705

PR:		261281
Approved by:	stephen (maintainer)

*/*: Update qscintilla2 to 2.13.1

Changes:
  - https://riverbankcomputing.com/news/QScintilla_2.13.1_Released

math/octave: Update to 6.4.0.

math/octave: Update 3.1.2 -> 5.7.0

math/octave: Remove extraneous entried in pkg-plist

Bump portrevision.

PR:		258027
Reported by:	lantw44@gmail.com

*/*: PyQt Update qscintilla2 to 2.13.0 and py-qt5-sip to 12.9.0

Changes:
  - https://riverbankcomputing.com/news/QScintilla_2.13.0_Released
  - https://www.riverbankcomputing.com/hg/sip/raw-file/tip/NEWS
PR:	257308
Exp-run by:	antoine

math/octave: Update to 6.3.0.

Also bump revision of dependent octave-forge-* ports.

devel/qscintilla2: Update to 2.12.1

Changelog:
	https://riverbankcomputing.com/news/QScintilla_2.12.1_Released

PR:		257002
Exp-run by:	antoine

math/octave: Add missing library dependencies.

PR:		256996
Reported by:	Philipp Ost <bsd@philippost.de>

misc/qtchooser: remove

QtChooser allows you to select your version of Qt among those installed.
However, this tool is no longer supported upstream and will not be
available for Qt6.
By default, our Qt installations are done in
${LOCALBASE}/lib/qt${QT_VERSION} as recommended.

We have added symbolic linking for the main binaries to
${LOCALBASE}/bin with the suffix -qt5.

graphics/mesa-libs: Bump reverse deps for libglvnd

Per discussion with bapt on helping pkg handle the changing of these
deps and avoiding impossible upgrade senarios.

PR:		246767
Reviewed by:	manu, bapt
Approved by:	x11
Differential Revision:	https://reviews.freebsd.org/D30824

math/suitesparse: adapt dependency lines after modularization

Do not bump PORTREVISION, because this should not change the resulting
packages.

Note for maintainers: try to not depend on the whole suitesparse package,
especially if your port do not require GraphBLAS (the biggest one).

Remove # $FreeBSD$ from Makefiles.

PyQt5: Update PyQt5 to 5.15.4 and py-qtbuilder to 1.9.1

PR:		254218
Exp-run by:	antoine

PyQt5: Update PyQt5 to 5.15.3, QScintilla2 to 2.12.0, py-qtbuilder to 1.9.0

* PyQt5: update to 5.15.3

This is a minor feature and bug-fix release. There are corresponding releases of
the other PyQt5-related packages.

 - Added the missing QImage.setAlphaChannel().
 - Support for the QtNetworkAuth library has been moved to a separate
PyQtNetworkAuth package.
 - Wheels no longer bundle the corresponding Qt libraries and instead
automatically install them from an external wheel.

* QScintilla2: update to 2.12.0

This adds support for Qt6 and removes support for Qt4.

 - Change the new distname (again)i due to a conflict
 - Use the new sip-build system

* devel/py-qtbuilder: update to 1.9.0
* devel/py-sip: fix flavor for sip-distinfo

PR:		253865
Exp-run by:	antoine

- Update math/octave to 6.2.0.
- Bump portrevision of dependent ports.
- Add patches to dependent ports math/octave-forge-* if I can figure them out.
- Mark broken dependent ports I couldn't figure out.

Update qscintilla2 to 2.11.6

- Remove unused libosmesa, enable sndfile.

PR:		251477
Submitted by:	jcfyecrayz@liamekaens.com

Update PyQt to 5.15.0, py-sip to 4.19.24 and qscintilla2 to 2.11.5

- Update PyQt to 5.15.0, py-sip to 4.19.24 and qscintilla2 to 2.11.5
- Use pypi for PYQT [1]
- Add devel/py-qt5-sip (Don't use it for now. It will be used in future updates
of PyQt with py-sip >= 5)
- Add missing py-qt5 ports: comms/py-qt5-sensors, devel/py-qt5-location,
devel/py-qt5-remoteobjects, net/py-qt5-networkauth
- Strip libs
- Refactor *_PATH and *_PORT parts

[1] RiverBankComputing doesn't offer links to download latest version of some
ports

PR:		247369
Reviewed by:	tcberner
Differential Revision:	https://reviews.freebsd.org/D25749
Exp-run by:	antoine

- Use math/qhull instead of math/qhull5.
- Bump portrevision.

PR:		249182
Submitted by:	jcfyecrayz@liamekaens.com

Bump 37 ports depending on math/openblas through USES=blaslapack:openblas
because after the recent math/openblas update the library name changed in
openblas

Update py-sip to 4.19.21 and qscintilla2 to 2.11.4

  - Update py-sip to 4.19.21
  - Update qscintilla2 to 2.11.4
  - Replace MASTER_SITE_RIVERBANK with https versions
  - Replace QSCI2_DISTNAME to match with the new one

PR:		245308
Approved by:	tcberner (mentor)
Exp-run by:	antoine

- Update to 5.2.0.

Fix math/openblas and bump dependent ports

* Fix build on i386 [1]
* Fix science/code_saturne build with new openblas [2]
* Avoid installing private headers [3]
* Prevent build from optimizing for host by correcting build confg [4]
* Bump portrevision of dependent ports [5]

This is correcting issues from r523749 [1][2][4] and r515970 [3]

PR:		231371
Reported by:	build cluster [1]
Reported by:	Dima Pasechnik <dimpase+freebsd@gmail.com> [2]
Reported by:	many [5]
Reviewed by:	mat, bapt
Approved by:	implicit, since this is a build fix

Clean up after java/openjdk6 and java/openjdk6-jre removal

java/openjdk6 support was removed from Mk/bsd.java.mk (r512662) and
java/openjdk6 and java/openjdk6-jre were removed from the ports tree
(r512663).  Now this patch completely removes remaining stuff from the
ports tree.

PR:			241953 (exp-run)
Reviewed by:		glewis
Approved by:		portmgr (antoine)
Differential Revision:	https://reviews.freebsd.org/D22342

Add USES=xorg USES=gl, ports categories m

Add USES=xorg and USES=gl to ports in categories starting with 'm'
While here, try to sprinkle other USES (mostly gnome and sdl) as needed.

Bump PORTREVISION for ports depending on the canonical version of GCC
as defined in Mk/bsd.default-versions.mk which has moved from GCC 8.3
to GCC 9.1 under most circumstances now after revision 507371.

This includes ports
 - with USE_GCC=yes or USE_GCC=any,
 - with USES=fortran,
 - using Mk/bsd.octave.mk which in turn features USES=fortran, and
 - with USES=compiler specifying openmp, nestedfct, c11, c++0x, c++11-lang,
   c++11-lib, c++14-lang, c++17-lang, or gcc-c++11-lib
plus, everything INDEX-11 shows with a dependency on lang/gcc9 now.

PR:		238330

- add JAVA and QT5 option, improve library stripping.
- Bump portrevision.

PR:		237854
Submitted by:	phascolarctos@protonmail.ch

- Remove share/info/dir from pkg-plist, because it is a generated file
  which is updated during installing packages.

PR:		237774
Submitted by:	Ting-Wei Lan <lantw44@gmail.com>

Related to revision 499061 bump ports with USES=fortran to have them
benefit from the improved situation where libgcc_s is only used when
absolutely necessary.

Suggested by:	tijl

Update devel/readline to 8.0

- Bump PORTREVISION of dependent ports for shlib change

Changes:	https://tiswww.case.edu/php/chet/readline/CHANGES
PR:		236156
Exp-run by:	antoine

- Add %%PORTDOCS%% as appropriate to pkg-plist, because man pages aren't
  created if DOCS is off.

PR:		236549
Submitted by:	Lorenzo Salvadore <phascolarctos@protonmail.ch>

- Add dependency audio/portaudio.
- Add dependency audio/libsndfile commented out because this port is currently
  vulnerable.
- Bump portrevision.

- Update math/octave to 5.1.0.
- Bump portrevision of unbroken octave-forge-* ports.
- Bump portrevision of math/dynare which uses library files from octave.
- Mark broken: octave-forge-(database|dicom|optim|fits|linear|linear|optim|
  parallel|signal|strings|struct|tisean|video).
- Broken optional dependencies in math/octave-forge to default to off.
- Bump portrevision of math/octave-forge.

Fix Qt5 symbol version scripts to put the catch-all clause first.  When
a symbol matches multiple clauses the last one takes precedence.  If the
catch-all is last it captures everything.  In the case of Qt5 libraries
this caused all symbols to have a Qt_5 label while some should have
Qt_5_PRIVATE_API.  This only affects lld because GNU ld always gives the
catch-all lowest priority.

Older versions of Qt5Webengine exported some memory allocation symbols from
the bundled Chromium.  Version 5.9 stopped exporting these [1] but the
symbols were kept as weak wrappers for the standard allocation functions to
maintain binary compatibility. [2][3]  The problem is that the call to the
standard function in these weak wrappers is only resolved to the standard
function if there's a call to this standard function in other parts of
Qt5Webengine, because only then is there a non-weak symbol that takes
precedence over the weak one.  If there's no such non-weak symbol the call

Update science/hdf5 to 1.10.4

- Bump PORTREVISION of dependent ports for shlib change

Changes:	https://portal.hdfgroup.org/display/support/HDF5%201.10.4#releasenotes
PR:		233070
Submitted by:	wen

Bump PORTREVISION for ports depending on the canonical version of GCC
defined via Mk/bsd.default-versions.mk which has moved from GCC 7.4 t
GCC 8.2 under most circumstances.

This includes ports
 - with USE_GCC=yes or USE_GCC=any,
 - with USES=fortran,
 - using Mk/bsd.octave.mk which in turn features USES=fortran, and
 - with USES=compiler specifying openmp, nestedfct, c11, c++0x, c++11-lang,
   c++11-lib, c++14-lang, c++17-lang, or gcc-c++11-lib
plus, as a double check, everything INDEX-11 showed depending on lang/gcc7.

PR:		231590

- Make changes to plist that should have been included with r485798.
- Bump portrevision.

Reported by:	pkg-fallout@

- Have the build process use gsed instead of sed.

PR:		ports/233459
Submitted by:	Kyle Evans <kevans@freebsd.org>

- Because of r233240, portrevision should have been bumped.

PR:		ports/233357
Submitted by:	Lorenzo Salvadore <phascolarctos@protonmail.ch>

math/octave: fix pkg-plist typos from r485083

Approved by:	fix-the-obvious

- adds USES+= gl (USE_GL without USES+= gl is deprecated);
- adds USES+= desktop-file-utils iconv;
- adds USE_XORG+= xcursor xinerama xrender;
- adds USE_QT+= printsupport sql widgets;
- strips liboctave.so.6.0.0.
- Corrects configure options for --withosmesa

PR:		ports/233240
Submitted by:	Lorenzo Salvadore <phascolarctos@protonmail.ch>

Install texinfo files (GNU info) into ${PREFIX}/share/info

After a discussion on the mailing list on moving manpages to
${PREFIX}/share/man for consistency with base where it is
installed in usr/share/man, it appeared the same should happen
to GNU info files which were installed under share in base and
not in ports.

Now texinfo is not in base on any of the supported version of FreeBSD
it is possible to proceed to this move and it is easier to do than
the manpage change.

Other benefit than consistency are less patching: all build tools but
cmake are expecting info files to be under share/info and cmake (patched here)
was having an exception for BSD so the patch makes FreeBSD case less
specific for them

Bump revision of all impacted ports

PR:		232907
exp-run by:	antoine
Differential Revision:	https://reviews.freebsd.org/D17816

cad/calculix-ccx math/arpack++ math/armadillo math/scilab math/octave: Change
dependency from math/arpack to math/arpack-ng

math/arpack is a dead, unmaintained project, and math/arpack-ng is a maintained
and updated fork.
This commit is effectively a version upgrade of the arpack dependency.

Approved by:	portmgr blanket (does not result in a change in contents of the
resulting package)

Change x11/xorgproto to become a build dep

Change x11/xorgproto to become a build time dependency when added to
USE_XORG.  Change the dependency to be on the port, rather than a file the
port installs.
Fix fallout.
Bump portrevision on depending ports.

PR:		230909
Reviewed by:	eadler
Approved by:	portmgr (antoine)
Obtained
from:	https://github.com/FreeBSDDesktop/freebsd-ports/tree/feature/xorgproto
exp-run:	antoine
Differential Revision:	https://reviews.freebsd.org/D16906