*/*: Bump consumers of x11-toolkits/gtk30

New version of gtk3 in tree

XFCE: Cleanup dependencies

- Update xfce.mk to avid forcing too many dependencies on consumers
- Change dependency on garcon to reference libgarcon-1.so (main
  library)
- Explicitly add USE_XFCE components to the ports actually needing
  them.
- Cleanup dependencies, adding/removing missing/extra dependencies
- Change the referenced library in some LIB_DEPENDS to the actually
  linked one (avoids false positives in poudriere Q/A tests)
- Bump PORTREVISION on all touched ports, even indirectly due to
  the effect of removing forced dependencies on certain components
- Remove USES=fuse from gigolo. I could not find any kind f reference
  to fuse in the code.
- xfce4-bsdcpufreq-plugin: Also remove empty comment at the top of
  the Makefile

accessibility/at-spi2-core: update to 2.46.0

What's new in at-spi2-core 2.46.0:
* Fix GetInterfaces documentation on org.a11y.atspi.Accessible
  interface.

What's new in at-spi2-core 2.45.91:
* Send device event controller events using the same signature as other
  events.
* Document the Accessible, Action, and Cache dbus interfaces.
* Fix license of atspi-gmain.c (#87).

What's new in at-spi2-core 2.45.90:
* xml: Add some documentation.
* xml: Fix event arguments.

Remove WWW entries moved into port Makefiles

Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.

This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.

Approved by:		portmgr (tcberner)

Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.

sysutils: remove 'Created by' lines

A big Thank You to the original contributors of these ports:

  *  <jsmith@resonatingmedia.com>
  *  Aaron Dalton <aaron@FreeBSD.org>
  *  Aaron Landwehr <aaron@snaphat.com>
  *  Adam Weinberger <adamw@FreeBSD.org>
  *  Adrian Chadd
  *  Adrian Chadd <adrian@FreeBSD.org>
  *  Akinori MUSHA aka knu <knu@idaemons.org>
  *  Alan Eldridge <alane@FreeBSD.org>
  *  Alan Eldridge <alane@geeksrus.net>
  *  Aldis Berjoza <aldis@bsdroot.lv>
  *  Alex Deiter <alex.deiter@gmail.com>

sysutils/xfce4-wavelan-plugin: Update to 0.6.3

- Remove outdated patch
- Add missing dependency (reported by QA)

Remove # $FreeBSD$ from Makefiles.

Welcome XFCE 4.16 to the FreeBSD ports tree!

Upstream announce: https://xfce.org/about/news/?post=1608595200

This XFCE release dropped support for GTK2 plugins and also dropped
GTK2 from all components.

WARNING: please check UPDATING before upgrading your packages. In
case of problems also read the libexo pkg-message.

Due to this some panel plugins and libraries will be removed since
they cannot compile anymore:

- print/xfce4-print
- x11/xfce4-quicklauncher-plugin

Update xfce4-wavelan-plugin to 0.6.2

All those need C11 compiler to build because of typedef redefinitions.

Approved by:	mentors (implicit approval)

Welcome XFCE 4.14 to the FreeBSD ports tree

- This XFCE release uses almost exclusively gtk3, so the USES=xfce
  now defaults to gtk3
- Make x11-themes/gtk-xfce-engine an optional dependency(disabled
  by default), it only supports gtk2, so would leave miost of this
  XFCE version unthemed.
- Add Greybird as an optional and enabled dependency as a modern
  theme supporting both GTK versions and all other XFCE parts
- The xfce4-vala port is deprecated and removed. The VALA bindings
  are available in the library ports using the GIR and VAPI options
  (on by default)
- Fixed various missing library and portlint warnings (portmgr fixit
  blanket)
- Default Display Manager changed to lightdm (Thanks to woodsb02

- Simplify XFCE MASTER_SITES usage
- Update XFCE Master sites list

Submitted by:		olivierd
Reviewed by:		mat
Approved by:		portmgr (mat)
Differential Revision:	https://reviews.freebsd.org/D8416

Clenup xfce ports:

- Add missing dependencies
- Remove unneeded patches
- Regenerate and rename legacy patches
- Add NLS option to ports providing such a knob, and missing the
  option
- Add INSTALL_TARGET=install-strip where missing
- Sort things
- Remove unneeded +=
- Cosmetic changes to OPTION related variables to improve readability
- Update WWW
- Silence portlint warnings about variables order
- Bump PORTREVISION where changing dependencies and/or adding
  install-strip

- Import upstream patch to fix a memory leak [1]
- While here rename and regenerate patches

PR:		223937 [1]
Submitted by:	J.R. Oldroyd <fbsd@opal.com>
Obtained
from:	https://git.xfce.org/panel-plugins/xfce4-wavelan-plugin/commit/?id=d4c76389d63199636c52e8a7a0ce80d5f2fde591
MFH:		2017Q4

- Update to 0.6.0
- Sort USES
- Regenerate patches with 'make makepatch'

By default libtool replaces -export-symbols <file> with -retain-symbols-file
<file> on ELF systems, but this doesn't really do what -export-symbols is
meant to do.  On GNU ELF systems it converts <file> to a simple version
script first and then uses -version-script instead of -retain-symbols-file.
Let USES=libtool patch libtool scripts to do this on all systems with GNU
ld(1).

Bump PORTREVISION on all ports where the build log contains -export-symbols.

audio/calf: This port builds a module that now exports only one function,
but it also builds a number of executables that link to this module and
expect to see other functions.  Because it's already a bit dodgy to link to
a module (libtool warns about this) let the module continue to export only
one function and instead build an ordinary library from the same source that
the executables can link to.  Fix a number of other issues in the same

USES=xfce: Stop overriding MASTER_SITE_SUBDIR.

Add an XFCE SITE_SUBDIR abbreviation and use it forf or the xfce ports,
which removes the need to set MASTER_SITE_SUBDIR in any of them.

This fixes ports that have USES=xfce but do not use the XFCE MASTER_SITE,
namely sysutils/xfce4-bsdcpufreq-plugin.

With hat:	portmgr

The FreeBSD Xfce team proudly presents Xfce 4.12.

Announce: http://www.xfce.org/about/news/?post=1425081600

Global changes:
- Switch to USES= xfce (D677)
- Reorganize options helper
- Fix USES= gettext-* when NLS option is not set [1], [2]
- Add LICENSE (when missing)

Update:
- to 4.12 (core components)
- audio/xfce4-mpc-plugin to 0.4.5
- deskutils/xfce4-tumbler to 0.1.31
- deskutils/xfce4-xkb-plugin to 0.7.1

Cleanup plist

- Convert to USES= libtool tar:bzip2
- Add new patch, 'patch-panel-plugin__wavelan.ci', in order to change percentage
values (25%, 50% and 75%, instead 40%, 55% and 70%)
- Fix signal quality
- Bump PORTREVISION

Submitted by:	J.R. Oldroyd <fbsd@opal.com>
Obtained
from:	http://lists.freebsd.org/pipermail/freebsd-xfce/2014-May/000914.html

- Update to 0.5.11
- Replace USE_GMAKE by USES= gmake
- Support STAGEDIR
- Adjust dependencies

Add NO_STAGE all over the place in preparation for the staging support (cat:
sysutils)

- Bump PORTREVISION after update of x11/libxfce4util, and x11-wm/xfce4-panel

While I'm here,
- Finish to convert USES
- Trim Makefile header
- Remove ABI version in LIB_DEPENDS
- Remove desktopfileutils, because MimeType entry is not present in desktop file

- Convert USE_GETTEXT to USES (part 3)

Approved by:	portmgr (bapt)

In categories starting with [n-s], remove empty lines (and also few cases of
trailing slashes) from pkg-plist.

- update png to 1.5.10

- Bump all XFCE after XFCE import

Re-assign to the Xfce team.

Approved by:    miwi (previous maintainer, Xfce team member)

Remove USE_GNOME=gnometarget from ports. It has been a empty keyword since
mid 2008.

PR:             ports/159624
Submitted by:   Ruslan Mahmatkhanov <cvs-src@yandex.ru>

- Get Rid MD5 support

Welcome XFCE 4.8 to the portstree!

Special Thanks to:      miwi, Olivier Duchateau <duchateau.olivier@gmail.com>

update xfce to 4.6.2
bump PORTREVISION on all depending ports

Bounce PORTREVISION for gettext-related ports.  Have fun, ya'll.

- update to 1.4.1
Reviewed by:    exp8 run on pointyhat
Supported by:   miwi

- update to jpeg-8

bump PORTREVISION for the recent update of

x11/libexo
x11-toolkits/libxfce4gui
sysutils/xfce4-settings
x11-wm/xfce4-panel
x11/Terminal

- Fix wlan0 interface and signal bars

PR:             140475
Submitted by:   "J.R. Oldroyd" <fbsd@opal.com> (many thanks! for this patch)

- bump all port that indirectly depends on libjpeg and have not yet been bumped
or updated
Requested by:   edwin

update xfce to 4.6.1
bump PORTREVISION where necessary

Bump PORTREVISION after xfce 4.6 update

Bump portrevision due to upgrade of devel/gettext.

The affected ports are the ones with gettext as a run-dependency
according to ports/INDEX-7 (5007 of them) and the ones with USE_GETTEXT
in Makefile (29 of them).

PR:             ports/124340
Submitted by:   edwin@
Approved by:    portmgr (pav)

- Fixes the build on FreeBSD >= 700042 by accounting for the new wireless API
- Adds information about network card and datarate to the tooltip.

PR:             120104
Submitted by:   gahr

update xfce4 to 4.4.2

Approved by:    portmgr (linimon)
Security:       CVE-2007-6531, CVE-2007-6532

- Change BROKEN line to: Does not work with the new wlan stack on 7.0

Mark as broken on gcc4.2.

- Welcome X.org 7.2 \o/.
- Set X11BASE to ${LOCALBASE} for recent ${OSVERSION}.
- Bump PORTREVISION for ports intalling files in ${X11BASE}.

update xfce to 4.4.1
bump PORTREVISION where needed

Switch to using new files Mk/bsd.ocaml.mk [1] and Mk/bsd.xfce.mk [2].

PR:     101029 [1], 108862 [2]

Submitted by:   Stanislav Sedov <ssedov at mbsd dot msk dot ru> [1], oliver [2]

update to 0.5.4
assign maintainership to miwi as discussed

update to 0.5.3 which supports xfce 4.4

Import xfce 4.4

- remove all obsolete ports or plugins
- update all plugins to their latest version to support xfce 4.4
  (otherwise they won't compile with 4.4)

Chase the GNOME X11BASE to LOCALBASE move, and fix the build with the
new freetype2 where needed.

Submitted by:   mezz, ahze, pav, and many others
Approved by:    portmgr (implicit, kris)

Reset inactive maintainer who has not responded to email.

Hat:            portmgr

Conversion to a single libtool environment.

Approved by:    portmgr (kris)

SHA256ify

Approved by: krion@

Replace ugly "@unexec rmdir %D... 2>/dev/null || true" with @dirrmtry

Approved by:    krion@
PR:             ports/88711 (related)

Mass-conversion to the USE_AUTOTOOLS New World Order.  The code present
in bsd.autotools.mk essentially makes this a no-op given that all the
old variables set a USE_AUTOTOOLS_COMPAT variable, which is parsed in
exactly the same way as USE_AUTOTOOLS itself.

Moreover, USE_AUTOTOOLS has already been extensively tested by the GNOME
team -- all GNOME 2.12.x ports use it.

Preliminary documentation can be found at:
        http://people.FreeBSD.org/~ade/autotools.txt

which is in the process of being SGMLized before introduction into the
Porters Handbook.

Light blue touch-paper.  Run.

Bump PORTREVISION to chase the glib20 shared library update.

Remove obsolete mastersite.

Source:         distfile survey
Approved by:    maintainer

Remove obsolete mastersite.

Source:         distfile survey
Approved by:    maintainer

Bump PORTREVISION to chase the glib20 shared lib version change.

- bring xfce4 to 4.2
- remove x11-fm/xfce4-fm-icons misc/xfce4-panel-themes (obsoleted by that
update)
- take maintainership of x11-wm/xfce4-session [1]
- bump PORTREVISION of all plugins because they need to be linked against the
new xfce4 libs

Approved by:    maintainer [1]

Update to 0.4.1

PR:             ports/75839
Submitted by:   maintainer

Bump PORTREVISIONS for all ports that depend on atk or pango to ease in the
big upgrade.

Apply a big libtool patch to allow porters to use the libtool installed by
the libtoolX ports instead of the one included with each port.  Ports that
set USE_LIBTOOL_VER=X will now use the ports version of libtool instead of
the included version.  To restore previous behavior, use the new macro,
USE_INC_LIBTOOL_VER.  Both macros accept the same argument: a libtool version.

For example, to use the ports version of libtool-1.5, add the following to
your Makefile:

USE_LIBTOOL_VER=        15

To use the included version of libtool with extra hacks provided by
libtool-1.5, add the following to your Makefile:

USE_INC_LIBTOOL_VER=    15

With this change, ports that had to add additional libtool hacks to prevent
.la files from being installed or to fix certain threading issues can now
delete those hacks (after appropriate testing, of course).

PR:             63944
Based on work by:eik and marcus
Approved by:    ade (autotools maintainer)
Tested by:      kris on pointyhat
Bound to be hidden problems:    You bet

Add xfce4-wavelan-plugin, a plugin for XFce4 panel displaying various
information about Wavelan devices.

PR:             ports/67107
Submitted by:   Manuel Rabade Garcia <mig@mig-29.net>