Remove expired port:
2014-04-10 x11-toolkits/libgail-gnome: gnome-panel 2.x will be updated in the
GNOME 3 import

First batch at resetting maintainership on ports that have not been staged and
without any pending PR

With hat:	portmgr

gnome-panel will be updated to the 3.x version when GNOME 3 will merged.
Deprecate the first batch of ports that are incompatible with the new 3.x
version.

Add NO_STAGE all over the place in preparation for the staging support (cat:
x11-toolkits)

Add an explicit dependency on pkgconf

Approved by:	portmgr (bapt)

- update png to 1.5.10

- Add LDFLAGS to CONFIGURE_ENV and MAKE_ENV (as it was done with LDFLAGS)
- Fix all ports that add {CPP,LD}FLAGS to *_ENV to modify flags instead

PR:             157936
Submitted by:   myself
Exp-runs by:    pav
Approved by:    pav

- Kick MD5 support

Presenting GNOME 2.30.2. for FreeBSD.

Presenting GNOME 2.30.1 for FreeBSD. The offical release notes for this
release can be found at http://library.gnome.org/misc/release-notes/2.30/ .

This release brings initial PackageKit support, Upower (replaces power
management part of hal), cuse4bsd integration with HAL and cheese, and a
faster Evolution.

Sadly GNOME 2.30.x will be the last release with FreeBSD 6.X support. This
will also be the last of the 2.x releases. The next release will be the
highly-anticipated GNOME 3.0 which will bring with it a new UI experience.

Currently, there are a few bugs with GNOME 2.30 that may be of note for our
users. Be sure to consult the UPGRADING note or the 2.30 upgrade FAQ at
http://www.freebsd.org/gnome/docs/faq230.html for specific upgrading
instructions, and the up-to-date list of known issues.

- update to 1.4.1
Reviewed by:    exp8 run on pointyhat
Supported by:   miwi

- update to jpeg-8

- bump all port that indirectly depends on libjpeg and have not yet been bumped
or updated
Requested by:   edwin

Update to 1.20.1.

Bump portrevision due to upgrade of devel/gettext.

The affected ports are the ones with gettext as a run-dependency
according to ports/INDEX-7 (5007 of them) and the ones with USE_GETTEXT
in Makefile (29 of them).

PR:             ports/124340
Submitted by:   edwin@
Approved by:    portmgr (pav)

- Remove unneeded dependency from gtk12/gtk20 [1]
- Remove USE_XLIB/USE_X_PREFIX/USE_XPM in favor of USE_XORG
- Remove X11BASE support in favor of LOCALBASE or PREFIX
- Use USE_LDCONFIG instead of INSTALLS_SHLIB
- Remove unneeded USE_GCC 3.4+

Thanks to all Helpers:
        Dmitry Marakasov, Chess Griffin, beech@, dinoex, rafan, gahr,
        ehaupt, nox, itetcu, flz, pav

PR:             116263
Tested on:      pointyhat
Approved by:    portmgr (pav)

Presenting GNOME 2.20.1 and all related works for FreeBSD.  The official
GNOME 2.20 release notes can be found at
http://www.gnome.org/start/2.20/notes/en/ .  Beyond that, this update
includes the new GIMP 2.4 (courtesy of ahze).

The GNOME 2.20 update also includes a huge change in the FreeBSD GNOME
hierarchy.  We are now using the more standard DATADIR of ${PREFIX}/share
rather than ${PREFIX}/share/gnome. The result is that fewer patches and
hacks are needed to port GNOME components to FreeBSD.  This will mean some
user changes may be required, so be sure to read /usr/ports/UPDATING for
more details.

This release and the things we accomplished in it would not have been
possible without mezz's crazy idea to collapse DATADIR, and his persistence
to make it happen successfully.  Ahze and pav also deserve thanks for

- Welcome X.org 7.2 \o/.
- Set X11BASE to ${LOCALBASE} for recent ${OSVERSION}.
- Bump PORTREVISION for ports intalling files in ${X11BASE}.

Presenting GNOME 2.18 for FreeBSD.  GNOME 2.18 is a departure from recent GNOME
releases in that it focuses more on stability and functionality than on
new features.  Not that it doesn't have its share of new and exciting
items.  See http://www.gnome.org/start/2.18/ for all the goodies in
this release.

GNOME 2.18 for FreeBSD would not have been possible without the hard work
of the FreeBSD GNOME Team and our intrepid band of testers including
J. W. Ballantine, Pawel Worach, Yasuda Keisuke, Pascal Hofstee, miwi,
Yoshihiro Ota, Vladimir Grebenschikov, Jukka A. Ukkonen,
Phillip Neumann, Franz Klammer, and Neal Delmonico.

Presenting GNOME 2.16.1 for FreeBSD.  This release represents a massive
amount of work by the FreeBSD GNOME Team and our testers.

On top of the usual GNOME update, we have taken this opportunity to move
GNOME from X11BASE to LOCALBASE.  This means roughly 600 ports NOT part of
the GNOME Desktop also need to be changed.  The bulk of the move was carried
out by ahze, mezz, and pav, but it would not have been possible without
cooperation from the FreeBSD KDE team who worked with us to make sure
GNOME and KDE can still coexist happily.  We would also like to send a
shout out to kris and pointyhat for putting up with multiple test runs
until we got something that was solid.

Back to GNOME 2.16.  This release brings a huge amount of new functionality
to FreeBSD.  The standard release notes can be read at
http://www.gnome.org/start/2.16/ .  But on top of what you will read there,

Remove USE_REINPLACE from categories starting with X

Conversion to a single libtool environment.

Approved by:    portmgr (kris)

Mark BROKEN on 4.X.

Reported by:    pointyhat via kris

Update to 1.1.3.

Update to 1.1.2.

Mass-conversion to the USE_AUTOTOOLS New World Order.  The code present
in bsd.autotools.mk essentially makes this a no-op given that all the
old variables set a USE_AUTOTOOLS_COMPAT variable, which is parsed in
exactly the same way as USE_AUTOTOOLS itself.

Moreover, USE_AUTOTOOLS has already been extensively tested by the GNOME
team -- all GNOME 2.12.x ports use it.

Preliminary documentation can be found at:
        http://people.FreeBSD.org/~ade/autotools.txt

which is in the process of being SGMLized before introduction into the
Porters Handbook.

Light blue touch-paper.  Run.

Bump PORTREVISION to chase the glib20 shared library update.

Update to 1.1.1.

Bump PORTREVISION to chase the glib20 shared lib version change.

Presenting GNOME 2.8 for FreeBSD (2.8.1 to be exact).

This release notes detailing all of the new goodies in GNOME 2.8 can
be found at http://www.gnome.org/start/2.8/notes/, and the list of what
was fixed in GNOME 2.8.1 can be found at
http://lists.gnome.org/archives/gnome-announce-list/2004-October/msg00056.html.

This release, as well as all of our others, would not have been possible
without the great efforts of our FreeBSD GNOME Team.  The list of
current members can be found at http://www.freebsd.org/gnome/contact.html
(including our newest member, Michael Johnson <ahze@FreeBSD.org>).

Special thanks also goes out to all of the loyal FreeBSD GNOME users that
put up with crashes and hangs to test and debug GNOME on FreeBSD.  We would
especially like to thank those users that provided patches for GNOME 2.7 and

Update to 1.0.6, and use the new libtool scheme.

[1] Only utilize ATK_ROLE_EMBEDDED if it exists.
Utilize lthack.

Submitted by:   [1] many

Update to 1.0.5.

Apply a big libtool patch to allow porters to use the libtool installed by
the libtoolX ports instead of the one included with each port.  Ports that
set USE_LIBTOOL_VER=X will now use the ports version of libtool instead of
the included version.  To restore previous behavior, use the new macro,
USE_INC_LIBTOOL_VER.  Both macros accept the same argument: a libtool version.

For example, to use the ports version of libtool-1.5, add the following to
your Makefile:

USE_LIBTOOL_VER=        15

To use the included version of libtool with extra hacks provided by
libtool-1.5, add the following to your Makefile:

USE_INC_LIBTOOL_VER=    15

With this change, ports that had to add additional libtool hacks to prevent
.la files from being installed or to fix certain threading issues can now
delete those hacks (after appropriate testing, of course).

PR:             63944
Based on work by:eik and marcus
Approved by:    ade (autotools maintainer)
Tested by:      kris on pointyhat
Bound to be hidden problems:    You bet

Update to 1.0.4.

Chase the glib20 update, and bump all affected ports' PORTREVISIONs.

Whoa there, boy, that's a mighty big commit y'all have there...

Begin autotools sanitization sequence by requiring ports to explicitly
specify which version of {libtool,autoconf,automake} they need, erasing
the concept of a "system default".

For ports-in-waiting:

        USE_LIBTOOL=YES         ->      USE_LIBTOOL_VER=13
        USE_AUTOCONF=YES        ->      USE_AUTOCONF_VER=213
        USE_AUTOMAKE=YES        ->      USE_AUTOMAKE_VER=14

Ports attempting to use the old style system after June 1st 2004 will be
sorely disappointed.

Add a missing dependency on gnomepanel.

Reported by:    GNOME Tinderbox

Update to 1.0.3.

Bump PORTREVISION on all ports that depend on gettext to aid with upgrading.

(Part 1)

Update to GNOME 2.4.0.  For all the goodies on what's changed, known issues,
future plans, etc., please see http://www.gnome.org/start/2.4/.

This commit represents work done by adamw, bland, and myself as well as
many other contributers:

Koop Mast <einekoai@chello.nl>
Akifyev Sergey <asa@gascom.ru>
Franz Klammer <klammer@webonaut.com>
?yvind Kolbu <oyvind@kebab.gaffel.nu>
Thomas E. Zander <riggs@rrr.de>
Jeremy Messenger <mezz7@cox.net>

Without these contirbuters, and our faithful users, GNOME 2.4.0 would not
be possible.

Please check the FreeBSD GNOME site for any FreeBSD gotchas, as well as
general FAQs and documentation (GNOME 2.4 updates to be posted soon).  The
best way to upgrade so that you get all shared library dependencies is:

portupgrade -rf -m BATCH=yes atk
portupgrade -R -m BATCH=yes gnome2

Approved by:    portmgr (kris, will, myself implicitly)
Requested by:   re as well as many other users

Convert to new GNOME infrastructure.

Remove USE_GNOMENG.

Clear moonlight beckons.
Requiem mors pacem pkg-comment,
And be calm ports tree.

E Nomini Patri, E Fili, E Spiritu Sancti.

Update to GNOME 2.2.

This is Phase I.  All existing ports have been updated to their GNOME 2.2
counterparts.

Update to 1.0.2.

GNOME has just changed the layout of their FTP site.  This resulted in
making all the distfiles unfetachable.  Update all GNOME ports that fetch
from MASTER_SITE_GNOME to fetch from the correct location.

Update to 1.0.1.

The FreeBSD GNOME team is proud to present GNOME 2.0 Release.

Update to GNOME 2.0 Release Candidate 1...the "Fever Pitch" release.

Update to the latest GNOME 2 snapshot.  This will be done it two parts.
This first part is the GNOME 2 API.  The next part will contain the desktop
components.

Update to the latest GNOME 2.0 snapshot, the "Stay on target!" release.

Back to betas...Update to GNOME 2.0 beta 5.

Update to GNOME 2.0 RC2.

Update to GNOME 2.0 RC 1.

Move back to share/gnome as a datadir.

The GNOME 2.0 APIs can be installed right along with the GNOME 1.4 APIs, but
the desktops will be mutually independent.  That is, you will not be
able to install gnomedesktop, for example, on the same machine as gnomecore.
However, you will be able to install the GNOME 2.0 desktop, and use all your
favorite GNOME 1.4 applications (like gaim, AbiWord, Evolution, etc.).

Use GNOME2 beta4 download location for all GNOME2 ports.

Use USE_LIBTOOL.

Change the GNOME 2.0 library ports to use share/gnome2 instead of share/gnome
in preparation for the GNOME 2.0 desktop.

Reviewed by:    sobomax
Approved by:    sobomax

Add libgail-gnome 0.5.0, an implementation of the ATK interfaces
for GNOME widgets.

This is the last brick in the wall called GNOME2 Development Platform.