devel/dbus: Teach D-Bus to obtain credentials using getsockopt(LOCAL_PEERCRED)

Obtained from:	Alex S <iwtcex@gmail.com>

devel/dbus: Moved man to share/man

Approved by:    portmgr (blanket)

devel/dbus: ensure version script is supported

dbus in its configure script is testing if ld supports version scripts
to do test it test an empty code with a map file full of symbols, which
results in failure with lld 1.17 which complains the version contains
unknown symbols.

By pass the test claiming we always support version script to fix this.
Bump portrevision as some packages has been build without proper
versioning

devel/dbus: Pull in a patch that uses closefrom(2)

PR:		240549

devel/dbus: Fix CMake config

The CMake config was essentially searching for the dbus pkgconfig file
in ${LOCALBASE}/lib/pkgconfig instead of ${LOCALBASE}/libdata/pkgconfig.
Not finding it, DBus1_FOUND was being set to false. devel/qt6-base, in
particular, was not finding dbus before this change.

MFH:		2023Q4

devel/dbus: update to 1.14.10

- Chase HTTP redirect

Changes:	https://gitlab.freedesktop.org/dbus/dbus/-/blob/dbus-1.14.10/NEWS
PR:		273702

devel/dbus: update to 1.14.6

dbus 1.14.6 (2023-02-08)
========================

Denial of service fixes:

• Fix an incorrect assertion that could be used to crash dbus-daemon or
  other users of DBusServer prior to authentication, if libdbus was compiled
  with assertions enabled.
  We recommend that production builds of dbus, for example in OS distributions,
  should be compiled with checks but without assertions.
  (dbus#421, Ralf Habacker; thanks to Evgeny Vereshchagin)

Other fixes:

devel/dbus: update to 1.14.4 release (+)

Changelog:	https://gitlab.freedesktop.org/dbus/dbus/-/blob/dbus-1.14.4/NEWS
MFH:		2022q4

Remove WWW entries moved into port Makefiles

Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.

This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.

Approved by:		portmgr (tcberner)

Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.

devel: remove 'Created by' lines

A big Thank You to the original contributors of these ports:

  *  "Waitman Gobble" <uzimac@da3m0n8t3r.com>
  *  <jkoshy@FreeBSD.org>
  *  Aaron Dalton <aaron@FreeBSD.org>
  *  Aaron Dalton <aaron@daltons.ca>
  *  Aaron H. K. Diep <ahkdiep@gmail.com>
  *  Aaron Hurt <ahurt@anbcs.com>
  *  Abel Chow <abel_chow@yahoo.com>
  *  Adam McLaurin
  *  Adam Saponara <as@php.net>
  *  Adam Weinberger <adamw@FreeBSD.org>
  *  Ade Lovett <ade@FreeBSD.org>

devel/dbus: use minixmlto over xmlto

Depending on the options set by the user w3m may depend on gtk,
if the X11 option is set)  which will result in a circular dependency
gtk2 -> glib2 -> dbus -> xmlto -> w3m -> gtk2

minixmlto never bring w3m in the dependency list

PR:		263950
Reported by:	dgilbert@eicat.ca

devel/dbus: update to 1.14.0

- Update posrt again with patch imported from upstream to fix [1]
  configure script behavior when --with-x is passed on its command
  line

PR:		263014
Obtained
from:	https://gitlab.freedesktop.org/dbus/dbus/-/commit/fdbb32bd1f3c972d3d5fd3998930749206a1095a
[1]

devel/dbus: revert update to 1.14.0

- Backout update to 1.14 until lockout of XFCE has been figured out.

Reported by:	madpilot

This reverts commit 692fe38479ebe04afe9bee34f68adfb52c1be91f.

devel/dbus: update to 1.14.0

Changelog:
	https://dbus.freedesktop.org/doc/NEWS

Exp-run by:	antoine
PR:		263014

devel/dbus: create directory for machine-id

Create the directory where dbus-uuidgen is *going* to write
the machine-id, just in case -- might affect only older FreeBSD
versions. dbus-uuidgen doesn't create intermediate directories
when given an explicit path either, so it does need to be done
by the environment.

(I'm purposely **not** also tackling other dbus-uuidgen issues,
those are in different PRs with different assignees)

PR:		225098
Reported by:	Andrey Zakharchenko

devel/dbus: use closefrom()

Don't do 1021 calls to close() when a single closefrom() will do.
This patch has been submitted upstream (by the reporter) but
is languishing there; there's a big difference between upstream's
development branch and the released stable version. I've taken
the initial patch from FreeBSD bugzilla, lightly mutated it with
upstream work.

PR:		240549
Reported by:	rozhuk.im@gmail.com

all: Remove all other $FreeBSD keywords.

Remove # $FreeBSD$ from Makefiles.

devel/dbus: Fix honoring LOCALBASE

Bits we were replacing in dbus/dbus-sysdeps-unix.c were moved to
dbus/dbus-sysdeps-util-unix.c. Make the patch more robust by first using
a patch and then REINPLACE_CMD.

Approved by:	portmgr blanket

devel/dbus: Do not pollute build products when TMPDIR is not /tmp

If you have a TMPDIR in your environment that points to an existing
directory other than /tmp (e.g., TMPDIR=/bigfilesystem/tmp), when you build
devel/dbus, a couple files get built with that value.

When the package is installed on a target system that may not have the
non-default TMPDIR used at build time, then you will get run-time errors.
Such as:

  % dbus-launch sh
  Failed to start message bus: Failed to bind socket
"/bigfilesystem/tmp/dbus-1nT4MYueXb": No such file or directory
  EOF in dbus-launch reading address from bus daemon

PR:		238548
Submitted by:	John Hein <jcfyecrayz@liamekaens.com>

devel/dbus: Remove remaining machine-id copy code

It was most likely meant to be removed in r493840, together with other
related bits.

PR:		238963
Reported by:	chadf@triularity.org
Approved by:	portmgr blanket

devel/dbus: update to 1.12.20

From upstreams changelog [1]:

dbus 1.12.20 (2020-07-02)
=========================

The "temporary nemesis" release.

Maybe security fixes:

* On Unix, avoid a use-after-free if two usernames have the same
  numeric uid. In older versions this could lead to a crash (denial of
  service) or other undefined behaviour, possibly including incorrect
  authorization decisions if <policy group=...> is used.

devel/dbus: update to 1.12.18

Exp-run by:	antoine
PR:		246990

Substitute REINPLACE_CMD with a patch

While here, mute MKDIR and regenerate patches.

Approved by:	portmgr blanket

Clean up the makefile

No functional changes intended.

Approved by:	portmgr blanket

devel/dbus: update to 1.12.16

PR:		242000
Exp-run by:	antoine
Reviewed by:	madpilot
Differential Revision:	https://reviews.freebsd.org/D22408

Create desktop@ as maintainer of some shared desktop ports

This idea has been around for quite some time. Time to make it happen.

In order to share the load on the ports required by multiple desktop
environments start to share the responsibility of maintainership.

This is the initial list that came to mind, but we can probably extend it, to
include another handful of ports.

WWW: https://wiki.freebsd.org/DesktopTeam
Mailing List: https://lists.freebsd.org/mailman/listinfo/freebsd-desktop

Approved by:	swills, kwm (gnome), madpilot (xfce)
Differential Revision:	https://reviews.freebsd.org/D22389

Add USES=xorg USES=gl, ports categories d

Add USES=xorg, USES=gl and in a few cases USES=gnome to ports in categories
starting with 'd'.

Update dbus to 1.12.12.

Remove machine-id copy code, it done it job.

- Fix shebangs

Update to 1.10.16

Create /var/run/dbus from rc script for users who mount tmpfs on /var/run.

PR:		216049

- Remove --localstatedir=/var, already added by bsd.port.mk.
- Use default locations for system pidfile, system socket and session
  sockets so Linux programs can find these too.
- Adjust rc.d script to eliminate gnome-subr dependency.
- Move examples to EXAMPLESDIR and add EXAMPLES option.
- Move /var/db/dbus/machine-id to default /var/lib/dbus/machine-id so Linux
  programs can find this file.  Add a postexec command to pkg-plist to copy
  this file to the new location on installation so the id is preserved.  The
  old file cannot be removed from pkg-plist because currently running
  processes might still need it.  Remove the old file from the rc.d script
  instead.
- Sort pkg-plist.

PR:		215174
Approved by:	maintainer timeout (4 weeks)

devel/dbus: update to 1.10.14

This routine release fixed couple of minor bugs (from FreeBSD perspective).

Discussed with:	kwm
With hat:       gnome

devel/dbus: update to 1.10.12

- update to 1.10.12
- utilize localbase instead of CFLAGS/LDFLAGS
- remove not applicable patching
- remove couple of patches, that are no more needed: these files in etc/dbus-1
  are now just compatibility stubs. The files were moved to share/dbus-1 in
  new version.

Thanks Antoine Brodin for an exp-run.

PR:		214454
Reviewed by:	kwm
With hat:   gnome

Replace using xmlto by minixmlto

This reduces the number of build dependencies for dbus with default set of
options as well as preventing a potential circular dependencies due to xmlto
bringing ghotscript which can bring dbus

Approved by:	kwm
Differential Revision:	https://reviews.freebsd.org/D8446

Remove ${PORTSDIR}/ from dependencies, categories d, e, f, and g.

With hat:	portmgr
Sponsored by:	Absolight

Update dbus to 1.8.20.

Remove two patches, and do what upstream intended it to be.

Update dbus to 1.8.16.

Make sure we start after ldconfig is run. So we can find stuff in /usr/local.

I haven't see this myself but it doesn't hurt to do it correctly.

PR:		196274
Submitted by:	mandree@ Craig Wiesen <ctyz1999+bugzilla@gmail.com>

Update to 1.8.12.

Drop :keepla from USES=libtool.
Add CPE data.

Update dbus to 1.8.10.

MFH:		2014Q4
Security:	c1930f45-6982-11e4-80e1-bcaec565249c

dbus-launch needs somes of those empty dirs to run

Cleanup plist

Update to 1.8.8.

Security update.

MFH:		2014Q3

Simplify a bit plist by using new syntax

Update to 1.8.6.

This update fixes two CVE's.

Security:	e6a7636a-02d0-11e4-88b6-080027671656

Update to 1.8.4.

This fixes a local dos vulnability.

Security:	52bbc7e8-f13c-11e3-bc09-bcaec565249c

Update to 1.8.0.

Drop libxml2 depend we don't need it.
Drop pkg-[de]install script for plist @mode,@group.
Use new OPTIONS handlers.
Add MANPAGES option.

When linking a library libA with a library libB using libtool, if libB.la
exists, libtool will add all libraries libB.la refers to (dependency_libs
field) to the linker command line and store them in the dependency_libs
field of libA.la.  So everything that subsequently links with libA will also
link to these extra libraries.  This causes too much overlinking.

This commit modifies Mk/Uses/libtool.mk so it empties the dependency_libs
field in .la libraries during staging.  However, because .la libraries have
very limited use when dependency_libs is empty it makes sense to completely
remove them during staging.

So with this commit USES=libtool is modified to remove .la libraries and a
new form (USES=libtool:keepla) is introduced in case they need to be kept
(dependency_libs is still emptied).

The FreeBSD x11@ and graphics team proudly presents
a zeising, kwm production, with help from dumbbell, bdrewery:

NEW XORG ON FREEBSD 9-STABLE AND 10-STABLE

This update switches over to use the new xorg stack by default on FreeBSD 9
and 10 stable, on osversions where vt(9) is available.
It is still possible to use the old stack by specifying WITHOUT_NEW_XORG in
/etc/make.conf .
FreeBSD 8-STABLE and released versions of FreeBSD still use
the old version.
A package repository with binary packages for new xorg will
be available soon.

This patch also contains updates of libxcb and related ports, pixman, as well

Don't run dbus-uuidgen in post-install scripts. This has the effect that
there will be no dangeling /var/db/dbus/machine-id on package install [1].
Change the dbus start script to always call dbus-uuidgen --ensure. Which
only generates /var/db/dbus/machine-id if it is not present.
While here switch to USES=libtool.

Reported by:	poudriere in strict mode via miwi@ [1]

Update to 1.6.18

Remove 'A' from COMMENT, update LIB_DEPENDS to new syntax.
Use USES=gmake pathfix. remove unneeded libtool.
Stagify.

Add NO_STAGE all over the place in preparation for the staging support (cat:
devel part 1)

Update to 1.6.12.

I'm not completly sure this affects us, but beter safe then sorry.
While here wordsmith Options description to try to make it clearer.

Security:	CVE-2013-2168

Add beter description for the X11 option.

Submitted by:	avg@

Don't make /var/lib we don't use it in the port. [1]
While here fix the path to machine-id in the dbus-uuidgen manpage

Submitted by:	bapt [1]

Update to 1.6.8.
Update Makefile header, port to OptionsNG and pet portlint.
Add portscout macro

- Get rid of PTHREAD_CFLAGS and PTHREAD_LIBS (category: devel)

Approved by:	portmgr

Correct the dbus-protocol.h so c++ in c++11 mode doesn't break.

While here don't remove the dbus pid file, dbus pipe and machine-id. [1]
Now dbus won't die on updates anymore.

Submitted by:	rakuco@, zeising@
Obtained from:	gnome dev repo [1]

- Don't create/remove the libexec/dbus-1 directory

Approved by:	gnome@ (kwm)

In the rc.d scripts, change assignments to rcvar to use the
literal name_enable wherever possible, and ${name}_enable
when it's not, to prepare for the demise of set_rcvar().

In cases where I had to hand-edit unusual instances also
modify formatting slightly to be more uniform (and in
some cases, correct). This includes adding some $FreeBSD$
tags, and most importantly moving rcvar= to right after
name= so it's clear that one is derived from the other.

Move the sockets from /var/tmp to /tmp so that they can be cleaned up
by default on reboot.

PR:             163653
Submitted by:   delphij

- Add LDFLAGS to CONFIGURE_ENV and MAKE_ENV (as it was done with LDFLAGS)
- Fix all ports that add {CPP,LD}FLAGS to *_ENV to modify flags instead

PR:             157936
Submitted by:   myself
Exp-runs by:    pav
Approved by:    pav

Update to 1.4.14.

Remove stale DBUS_SLAVE cruf.
Break out CPPFLAGS from CONFIGURE_ENV.
Add additional x11 depends [1]
Specify full path to dbus-uuidgen. So it can be run on new installs, before
${LOCALBASE}/bin is added to PATH. [2]

Submitted by:   John Prather <john.c.prather@gmail.com> [1]
                Michal Varga <varga.michal@gmail.com> [2]

Update to 1.4.6.

Disable the man2html stuff completely.

PR:             ports/153532
Reported by:    Charlie Kester <corky1951@comcast.net>

Update to 1.4.1.

Sync to new bsd.autotools.mk

Update to 1.4.0.

Fix dbus launch on diskless systems [1]

PR:             ports/151331 [1], ports/132304
Submitted by:   Zane C.B. <vvelox@vvelox.net> [1]

Populate configuration files with additional includes of kde4 files.
(in preparation for KDE 4.5.1 update)

Approved by:    kwm

Presenting GNOME 2.30.1 for FreeBSD. The offical release notes for this
release can be found at http://library.gnome.org/misc/release-notes/2.30/ .

This release brings initial PackageKit support, Upower (replaces power
management part of hal), cuse4bsd integration with HAL and cheese, and a
faster Evolution.

Sadly GNOME 2.30.x will be the last release with FreeBSD 6.X support. This
will also be the last of the 2.x releases. The next release will be the
highly-anticipated GNOME 3.0 which will bring with it a new UI experience.

Currently, there are a few bugs with GNOME 2.30 that may be of note for our
users. Be sure to consult the UPGRADING note or the 2.30 upgrade FAQ at
http://www.freebsd.org/gnome/docs/faq230.html for specific upgrading
instructions, and the up-to-date list of known issues.

Begin the process of deprecating sysutils/rc_subr by
s#. %%RC_SUBR%%#. /etc/rc.subr#

Presenting GNOME 2.28.1 for FreeBSD.  The official release notes for this
release can be found at http://library.gnome.org/misc/release-notes/2.28/ .
Officially, this is mostly a polishing release in preparation for GNOME 3.0
due in about a year.

On the FreeBSD front, though, a lot went into this release.  Major thanks
goes to kwm and avl who did a lot of the porting work for this release.
In particular, kwm brought in Evolution MAPI support for better Microsoft
Exchange integration.  Avl made sure that the new gobject introspection
repository ports were nicely compartmentalized so that large dependencies
aren't brought in wholesale.

But, every GNOME team member (ahze, avl, bland, kwm, mezz, and myself)
contributed to this release.

Add support to create users and groups from information stored in UIDs/GIDs
files. Users and groups won't be deleted at deinstall time as we're lacking
a refcount to know if any port is using them.

Also convert a few ports while I'm here.

PR:             ports/108514
Submitted by:   mm, self

-Repocopy devel/libtool15 -> libtool22 and libltdl15 -> libltdl22.
-Update libtool and libltdl to 2.2.6a.
-Remove devel/libtool15 and devel/libltdl15.
-Fix ports build with libtool22/libltdl22.
-Bump ports that depend on libltdl22 due to shared library version change.
-Explain what to do update in the UPDATING.

It has been tested with GNOME2, XFCE4, KDE3, KDE4 and other many wm/desktop
and applications in the runtime.

With help:      marcus and kwm
Pointyhat-exp:  a few times by pav
Tested by:      pgollucci, "Romain Tartière" <romain@blogreen.org>, and
                a few MarcusCom CVS users. Also, I might have missed a few.
Repocopy by:    marcus
Approved by:    portmgr

Update to 1.2.4.6.

Do not compile with -Wno-pointer-sign.  This fixes the build with GCC 3.x.

Reported by:    ale

Update to 1.2.4.4.

Presenting GNOME 2.24 for FreeBSD.

See http://library.gnome.org/misc/release-notes/2.24/ for the general
release notes.  On the FreeBSD front, this release introduces Fuse support
in HAL, adds multi-CPU support to libgtop, WebKit updates, and fixes some
long-standing seahorse and gnome-keyring bugs.  The documentation updates
to the website are forthcoming.

This release features commits by adamw, ahze, kwm, mezz, and myself.  It would
not have been possible without are contributors and testers:

Alexander Loginov
Craig Butler [1]
Dmitry Marakasov [6]
Eric L. Chen

Update to 1.2.1.

- Remove unneeded dependency from gtk12/gtk20 [1]
- Remove USE_XLIB/USE_X_PREFIX/USE_XPM in favor of USE_XORG
- Remove X11BASE support in favor of LOCALBASE or PREFIX
- Use USE_LDCONFIG instead of INSTALLS_SHLIB
- Remove unneeded USE_GCC 3.4+

Thanks to all Helpers:
        Dmitry Marakasov, Chess Griffin, beech@, dinoex, rafan, gahr,
        ehaupt, nox, itetcu, flz, pav

PR:             116263
Tested on:      pointyhat
Approved by:    portmgr (pav)

-Fix the build with WITHOUT_X11. [1]
-Make WITHOUT_X11 actually works by add --without-x11.

Submitted by:   Jonathan Hogg <jonathan@significant-whitespace.com> [1]

The FreeBSD GNOME team is proud to annunce the release of GNOME 2.22.0 for
FreeBSD.  The official GNOME 2.22 release notes can be found at
http://library.gnome.org/misc/release-notes/2.22/ .  On the FreeBSD front,
this release features an updated hal port with support for video4linux
devices, DRM (Direct Rendering), and better support of removable media.  Work
is also underway to tie webkit more closely into GNOME.  As part of the
GNOME 2.22 upgrade, GStreamer received a rather large upgrade as well.
Be sure to consult UPDATING on the proper steps to upgrade all of your
GNOME ports.

This release would not have been possible without the contributions and
testing efforts of the following people:

Pawel Worach
kan
edwin
Peter Ulrich Kruppa
J. W. Ballantine
Yasuda Keisuke
Andriy Gapon

- Welcome X.org 7.2 \o/.
- Set X11BASE to ${LOCALBASE} for recent ${OSVERSION}.
- Bump PORTREVISION for ports intalling files in ${X11BASE}.

Ignore SIGPIPE (and EPIPE) when writing out PID to a client.  Some clients
(like gnome-session) close the pipe too early resulting in dbus-daemon
terminating.

Update to 1.0.2.

Security:       This fixes the vulnerability described in CVE-2006-6107

Update to 1.0.1.

Let USE_GNOME be overridden by slave ports.  Needed for comming changes to
dbus-sharp.

Approved by:    pav

Update to 1.0.0.

Change the name of the dbus system socket to system_bus_socket per the dbus
spec.

"The address of the system message bus is given in the
DBUS_SYSTEM_BUS_ADDRESS environment variable. If that variable is not set,
applications should try to connect to the well-known address
unix:path=/var/run/dbus/system_bus_socket."

Approved by:    marcus

Make sure dbus-uuidgen --ensure is run during post-install to create
the machine-id file.  At least one user reported errors related to this
file not existing.  Strange that it did not affect everyone.

I was too over-zealous with patch removal in the 0.95 update.  Restore
a pkg-config bit that will fix dependent port builds.

Update to 0.95.

Fix the rc script (must now source RC_SUBR before GNOME_SUBR)

Start dbus if gnome_enable is set to yes in /etc/rc.conf

Update to 0.94.

Add a missing #include to correct a problem where dbus would refuse to
launch if /usr/local or /usr/X11R6 were NFS mounts.  The error seen would be:

Failed to start message bus: Can't calculate buffer size when reading directory

Approved by:    portmgr (implicit)

Presenting GNOME 2.16.1 for FreeBSD.  This release represents a massive
amount of work by the FreeBSD GNOME Team and our testers.

On top of the usual GNOME update, we have taken this opportunity to move
GNOME from X11BASE to LOCALBASE.  This means roughly 600 ports NOT part of
the GNOME Desktop also need to be changed.  The bulk of the move was carried
out by ahze, mezz, and pav, but it would not have been possible without
cooperation from the FreeBSD KDE team who worked with us to make sure
GNOME and KDE can still coexist happily.  We would also like to send a
shout out to kris and pointyhat for putting up with multiple test runs
until we got something that was solid.

Back to GNOME 2.16.  This release brings a huge amount of new functionality
to FreeBSD.  The standard release notes can be read at
http://www.gnome.org/start/2.16/ .  But on top of what you will read there,