devel/gconf2: Moved man to share/man

Approved by:    portmgr (blanket)

Remove WWW entries moved into port Makefiles

Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.

This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.

Approved by:		portmgr (tcberner)

Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.

cleanup: remove '$MCom' tag

gnome@ no longer uses Marcusom as their staging ground.

Approved by:		gnome (nc)
Differential Revision:	https://reviews.freebsd.org/D35866

devel: remove 'Created by' lines

A big Thank You to the original contributors of these ports:

  *  "Waitman Gobble" <uzimac@da3m0n8t3r.com>
  *  <jkoshy@FreeBSD.org>
  *  Aaron Dalton <aaron@FreeBSD.org>
  *  Aaron Dalton <aaron@daltons.ca>
  *  Aaron H. K. Diep <ahkdiep@gmail.com>
  *  Aaron Hurt <ahurt@anbcs.com>
  *  Abel Chow <abel_chow@yahoo.com>
  *  Adam McLaurin
  *  Adam Saponara <as@php.net>
  *  Adam Weinberger <adamw@FreeBSD.org>
  *  Ade Lovett <ade@FreeBSD.org>

textproc/libxml2: bump all LIB_DEPENDS consumers

This is a separate commit to facilitate easier cherry-picking for
quarterly.

PR: 262853, 262940, 262877, 263126
Approved by: fluffy (mentor)

textproc/libxml2: bump all dependencies

This should make sure that all dependent ports will pick
up the new version commited with a13ec21cd733f67a9fc0dc00ab45268bdc236246

devel/glib: convert gio modules and glib schemas to triggers

Use trigger to compile glib schemas, and generate gio modules cache

PR:		262567
Reviewed by:	tcberner
Exp-run by:	antoine
Differential Revision:	https://reviews.freebsd.org/D34564

devel/gconf2: cleanup and reduce the number of dependency

Switch the ipc mecanism from Orbit2 to dbus (ORBit2 is not used
anywhere anymore).

While here remove the default services, since gconf is not used
anymore by any desktop, having the default service started to allow
configuring system wide configuration is pointless.

Drop the option for ldap, given that no desktop uses it anymore, the ability
so deal with ldap is now pointless as well

Drop the dependency on gtk only used for gconf-sanity check

This shave the dependency lits removing rust, polkit and orbit from it
while not changing the features for the few left consumers.

Remove # $FreeBSD$ from Makefiles.

In preparation of the update of glib remove the -reference ports

Those ports mainly concern old Gnome2 libraries, the behaviour of this infra
is not compatible with the meson build system (being used in newer version)
the documentation is provided otherwise in the other version

Move some gnome@ ports to desktop@

As gnome@ is lacking active committers at the moment, transfer some of its
ports [1] up the stack to the desktop@ group, in hope that this way we get some
updates in as the set of people that "should feel responsible" grows.

As soon as gnome@ grows some committers again, this can (and should) of course
be reverted again.

[1] The list of ports chosen in this move consits of all the ports that are
required to build x11/kde5.

Approved by:	portmgr (bapt)
Differential Revision:	https://reviews.freebsd.org/D26362

devel: Add missing USES={gl,gnome,php,sdl}

- Fix shebangs

Remove ${PORTSDIR}/ from dependencies, categories d, e, f, and g.

With hat:	portmgr
Sponsored by:	Absolight

Remove reduntant line from pkg-descr.

- Optionize DOCS
- Switch to options helpers

Approved by:	kwm

Convert a bunch of @exec into proper @postexec

By default libtool replaces -export-symbols <file> with -retain-symbols-file
<file> on ELF systems, but this doesn't really do what -export-symbols is
meant to do.  On GNU ELF systems it converts <file> to a simple version
script first and then uses -version-script instead of -retain-symbols-file.
Let USES=libtool patch libtool scripts to do this on all systems with GNU
ld(1).

Bump PORTREVISION on all ports where the build log contains -export-symbols.

audio/calf: This port builds a module that now exports only one function,
but it also builds a number of executables that link to this module and
expect to see other functions.  Because it's already a bit dodgy to link to
a module (libtool warns about this) let the module continue to export only
one function and instead build an ordinary library from the same source that
the executables can link to.  Fix a number of other issues in the same

MASTER_SITES cleanup.

- Replace ${MASTER_SITE_FOO} with FOO.
- Merge MASTER_SITE_SUBDIR into MASTER_SITES when possible. (This means 99.9%
  of the time.)
- Remove occurrences of MASTER_SITE_LOCAL when no subdirectory was present and
  no hint of what it should be was present.
- Fix some logic.
- And generally, make things more simple and easy to understand.

While there, add magic values to the FESTIVAL, GENTOO, GIMP, GNUPG, QT and
SAMBA macros.

Also, replace some EXTRACT_SUFX occurences with USES=tar:*.

Checked by:	make fetch-urlall-list
With hat:	portmgr
Sponsored by:	Absolight

- Add three empty dirs that belonged to gnomehier to devel/gconf2,
  this prevents stage violations during build of ports using gconftool-2
- White list etc/gconf/gconf.xml.defaults from stage orphans as gconftool-2
  is unpredictable

With hat:	portmgr

The FreeBSD GNOME team proudly presents GNOME 3.14 and Cinnamon 2.2.
Gnome 3.14.1 and Cinnamon 2.2.16 are supported on FreeBSD 9.3-RELEASE and up.

This commit removes the old GNOME 2 desktop, bindings and some ports that
can't be compiled. A few ports where updated to more recent versions to
allow them to compile with this update.

Apart from updating ports to newer versions

GDM is more integrated with gnome-shell now, and handles several things for
the GNOME desktop such as screen locking. If you want to use GNOME 3 via
startx, you will have to add your own lock screen/screensaver. For example
xscreensaver
can be used for sessions started without GDM.

Shell Extensions can be installed via https://extensions.gnome.org/ , we have

Cleanup plist

- Convert to USES=libtool and add INSTALL_TARGET=install-strip
- Remove gio-querymodules command from post-install; not needed with staging

Obtained from:	gnome-dev

Unbreak reference port

Convert a bunch of USE_BZIP2 to USES=tar:bzip2

Approved by:	portmgr (not really, but touches unstaged ports)

net/openldap24-*:
- Convert to USES=libtool and bump dependent ports
- Avoid USE_AUTOTOOLS
- Don't use PTHREAD_LIBS
- Use MAKE_CMD

databases/glom:
- Drop :keepla
- Add INSTALL_TARGET=install-strip

databases/libgda4* databases/libgda5*:
- Convert to USES=libtool and bump dependent ports
- USES=tar:xz
- Use INSTALL_TARGET=install-strip
- Use @sample

Modernize LIB_DEPENDS

With hat:	portmgr

Remove indefinite articles and trailing periods from COMMENT, plus
minor COMMENT typos and surrounding whitespace fixes. Categories D-F.

CR:		D196
Approved by:	portmgr (bapt)

The FreeBSD x11@ and graphics team proudly presents
a zeising, kwm production, with help from dumbbell, bdrewery:

NEW XORG ON FREEBSD 9-STABLE AND 10-STABLE

This update switches over to use the new xorg stack by default on FreeBSD 9
and 10 stable, on osversions where vt(9) is available.
It is still possible to use the old stack by specifying WITHOUT_NEW_XORG in
/etc/make.conf .
FreeBSD 8-STABLE and released versions of FreeBSD still use
the old version.
A package repository with binary packages for new xorg will
be available soon.

This patch also contains updates of libxcb and related ports, pixman, as well

- Stage support

Add NO_STAGE all over the place in preparation for the staging support (cat:
devel part 2)

Add an explicit dependency on pkgconf

- Convert USE_GETTEXT to USES (part 4)

Approved by:	portmgr (bapt)

Convert almost all gnome@ ports to OptionsNG, trim header, use USES=pathfix
instead of gnomehack and pet portlint.
Add conflicts with future gnome3 versions.

Reviewed by:	miwi, bapt

- update png to 1.5.10

- Add LDFLAGS to CONFIGURE_ENV and MAKE_ENV (as it was done with LDFLAGS)
- Fix all ports that add {CPP,LD}FLAGS to *_ENV to modify flags instead

PR:             157936
Submitted by:   myself
Exp-runs by:    pav
Approved by:    pav

-remove MD5

Sync to new bsd.autotools.mk

Presenting GNOME 2.32.1 for FreeBSD. The offical release notes for this
release can be found at http://library.gnome.org/misc/release-notes/2.32/

This will be the last release of the GNOME 2.x series, mainly a bugfix and
bridge release to the first release of the GNOME 3.x series.

This release features commits by avl, marcus, mezz and myself.

The FreeBSD GNOME Team would like to thank the following contributors and
testers for there help with this release:

Zane C.B. <vvelox@vvelox.net>
romain@
Olaf Seibert <O.Seibert@cs.ru.nl>
DomiX

Bump PORTREVISION and add USE_GETTEXT where missing.

PR:             147257

Presenting GNOME 2.30.1 for FreeBSD. The offical release notes for this
release can be found at http://library.gnome.org/misc/release-notes/2.30/ .

This release brings initial PackageKit support, Upower (replaces power
management part of hal), cuse4bsd integration with HAL and cheese, and a
faster Evolution.

Sadly GNOME 2.30.x will be the last release with FreeBSD 6.X support. This
will also be the last of the 2.x releases. The next release will be the
highly-anticipated GNOME 3.0 which will bring with it a new UI experience.

Currently, there are a few bugs with GNOME 2.30 that may be of note for our
users. Be sure to consult the UPGRADING note or the 2.30 upgrade FAQ at
http://www.freebsd.org/gnome/docs/faq230.html for specific upgrading
instructions, and the up-to-date list of known issues.

- update to 1.4.1
Reviewed by:    exp8 run on pointyhat
Supported by:   miwi

- update to jpeg-8

Presenting GNOME 2.28.1 for FreeBSD.  The official release notes for this
release can be found at http://library.gnome.org/misc/release-notes/2.28/ .
Officially, this is mostly a polishing release in preparation for GNOME 3.0
due in about a year.

On the FreeBSD front, though, a lot went into this release.  Major thanks
goes to kwm and avl who did a lot of the porting work for this release.
In particular, kwm brought in Evolution MAPI support for better Microsoft
Exchange integration.  Avl made sure that the new gobject introspection
repository ports were nicely compartmentalized so that large dependencies
aren't brought in wholesale.

But, every GNOME team member (ahze, avl, bland, kwm, mezz, and myself)
contributed to this release.

-Repocopy devel/libtool15 -> libtool22 and libltdl15 -> libltdl22.
-Update libtool and libltdl to 2.2.6a.
-Remove devel/libtool15 and devel/libltdl15.
-Fix ports build with libtool22/libltdl22.
-Bump ports that depend on libltdl22 due to shared library version change.
-Explain what to do update in the UPDATING.

It has been tested with GNOME2, XFCE4, KDE3, KDE4 and other many wm/desktop
and applications in the runtime.

With help:      marcus and kwm
Pointyhat-exp:  a few times by pav
Tested by:      pgollucci, "Romain Tartière" <romain@blogreen.org>, and
                a few MarcusCom CVS users. Also, I might have missed a few.
Repocopy by:    marcus
Approved by:    portmgr

- bump all port that indirectly depends on libjpeg and have not yet been bumped
or updated
Requested by:   edwin

Update to 2.26.2.

Attempt to fix http://bugzilla.gnome.org/show_bug.cgi?id=581880 by
removing some g_asserts which should no longer be necessary.

Update to 2.26.1.

Presenting GNOME 2.26 for FreeBSD.  See
http://library.gnome.org/misc/release-notes/2.26/ for a list of what's new.
On the FreeBSD front, we introduced a port of libxul 1.9 as an alternative
for Firefox 2.0 as a Gecko provider.  Almost all of the Gecko consumers
can make use of this provider by setting:

WITH_GECKO=libxul

The GNOME 2.26 port was done by ahze, kwm, marcus, and mezz with
contributions by Joseph S. Atkinson, Peter Wemm, Eric L. Chen,
Martin Matuska, Craig Butler, and Pawel Worach.

- Use GNOME macro instead of ${MASTER_SITE_GNOME}, remove
  MASTER_SITE_SUBDIR when possible.

PR:             ports/125243
Submitted by:   pgollucci
Reworked by:    myself
Tested on:      pointyhat exp-run (pav)

Presenting GNOME 2.24 for FreeBSD.

See http://library.gnome.org/misc/release-notes/2.24/ for the general
release notes.  On the FreeBSD front, this release introduces Fuse support
in HAL, adds multi-CPU support to libgtop, WebKit updates, and fixes some
long-standing seahorse and gnome-keyring bugs.  The documentation updates
to the website are forthcoming.

This release features commits by adamw, ahze, kwm, mezz, and myself.  It would
not have been possible without are contributors and testers:

Alexander Loginov
Craig Butler [1]
Dmitry Marakasov [6]
Eric L. Chen

Bump portrevision due to upgrade of devel/gettext.

The affected ports are the ones with gettext as a run-dependency
according to ports/INDEX-7 (5007 of them) and the ones with USE_GETTEXT
in Makefile (29 of them).

PR:             ports/124340
Submitted by:   edwin@
Approved by:    portmgr (pav)

The FreeBSD GNOME team is proud to annunce the release of GNOME 2.22.0 for
FreeBSD.  The official GNOME 2.22 release notes can be found at
http://library.gnome.org/misc/release-notes/2.22/ .  On the FreeBSD front,
this release features an updated hal port with support for video4linux
devices, DRM (Direct Rendering), and better support of removable media.  Work
is also underway to tie webkit more closely into GNOME.  As part of the
GNOME 2.22 upgrade, GStreamer received a rather large upgrade as well.
Be sure to consult UPDATING on the proper steps to upgrade all of your
GNOME ports.

This release would not have been possible without the contributions and
testing efforts of the following people:

Pawel Worach
kan
edwin
Peter Ulrich Kruppa
J. W. Ballantine
Yasuda Keisuke
Andriy Gapon

Presenting GNOME 2.20.1 and all related works for FreeBSD.  The official
GNOME 2.20 release notes can be found at
http://www.gnome.org/start/2.20/notes/en/ .  Beyond that, this update
includes the new GIMP 2.4 (courtesy of ahze).

The GNOME 2.20 update also includes a huge change in the FreeBSD GNOME
hierarchy.  We are now using the more standard DATADIR of ${PREFIX}/share
rather than ${PREFIX}/share/gnome. The result is that fewer patches and
hacks are needed to port GNOME components to FreeBSD.  This will mean some
user changes may be required, so be sure to read /usr/ports/UPDATING for
more details.

This release and the things we accomplished in it would not have been
possible without mezz's crazy idea to collapse DATADIR, and his persistence
to make it happen successfully.  Ahze and pav also deserve thanks for

- Set --mandir and --infodir in CONFIGURE_ARGS if the configure script
  supports them.  This is determined by running ``configure --help'' in
  do-configure target and set the shell variable _LATE_CONFIGURE_ARGS
  which is then passed to CONFIGURE_ARGS.
- Remove --mandir and --infodir in ports' Makefile where applicable
  Few ports use REINPLACE_CMD to achieve the same effect, remove them too.
- Correct some manual pages location from PREFIX/man to MANPREFIX/man
- Define INFO_PATH where necessary
- Document that .info files are installed in a subdirectory relative to
  PREFIX/INFO_PATH and slightly change add-plist-info to use INFO_PATH and
  subdirectory detection.

PR:             ports/111470
Approved by:    portmgr
Discussed with: stas (Mk/*), gerald (info related stuffs)
Tested by:      pointyhat exp run

- Welcome X.org 7.2 \o/.
- Set X11BASE to ${LOCALBASE} for recent ${OSVERSION}.
- Bump PORTREVISION for ports intalling files in ${X11BASE}.

Presenting GNOME 2.18 for FreeBSD.  GNOME 2.18 is a departure from recent GNOME
releases in that it focuses more on stability and functionality than on
new features.  Not that it doesn't have its share of new and exciting
items.  See http://www.gnome.org/start/2.18/ for all the goodies in
this release.

GNOME 2.18 for FreeBSD would not have been possible without the hard work
of the FreeBSD GNOME Team and our intrepid band of testers including
J. W. Ballantine, Pawel Worach, Yasuda Keisuke, Pascal Hofstee, miwi,
Yoshihiro Ota, Vladimir Grebenschikov, Jukka A. Ukkonen,
Phillip Neumann, Franz Klammer, and Neal Delmonico.

Update to 2.16.1.

Presenting GNOME 2.16.1 for FreeBSD.  This release represents a massive
amount of work by the FreeBSD GNOME Team and our testers.

On top of the usual GNOME update, we have taken this opportunity to move
GNOME from X11BASE to LOCALBASE.  This means roughly 600 ports NOT part of
the GNOME Desktop also need to be changed.  The bulk of the move was carried
out by ahze, mezz, and pav, but it would not have been possible without
cooperation from the FreeBSD KDE team who worked with us to make sure
GNOME and KDE can still coexist happily.  We would also like to send a
shout out to kris and pointyhat for putting up with multiple test runs
until we got something that was solid.

Back to GNOME 2.16.  This release brings a huge amount of new functionality
to FreeBSD.  The standard release notes can be read at
http://www.gnome.org/start/2.16/ .  But on top of what you will read there,

-INSTALLS_SHLIB -> USE_LDCONFIG.
-Add locale stuff in plist that aren't in mtree/BSD.x11-4.dist.

PR:             ports/101518
Submitted by:   Stanislav Sedov <ssedov@mbsd.msk.ru>

Now that ORBit2 no longer depends on popt, add an explicit dependency here
to fix the build.

Reported by:    pointyhat via kris

- Add header in these *-reference ports.
- Fix a few of pkg-descr by chase the rename.
- Move all PORTREVISION and PORTEPOCH to top with ?=.
- Put USE_X_PREFIX back in, but under REFERENCE_PORT, and remove PREFIX? and
  USE_XLIB. This fix ports to use the correct mtree when you change the prefix,
  for example:

        Incorrect: (Without USE_X_PREFIX)
        ================================
        # cd /usr/ports/x11-toolkits/gtk20
        # make -V MTREE_FILE
        /etc/mtree/BSD.x11-4.dist
        # make PREFIX=/tmp/foo -V MTREE_FILE
        /etc/mtree/BSD.local.dist <-- Here...
        ================================

Move the gconf2 programming reference to the gconf2-reference port.

Fix the long standing bug which caused newly installed GConf
applications to not pick up their default configuration values unless
gconfd-2 was manually restarted. Now:

  - gconftool-2 --makefile-{install|uninstall}-rule will send a SIGHUP
    to all the gconfd-2 processes.
  - upon receipt of that SIGHUP, gconfd-2 will reload the database and
    therefore pick up the added/removed schemas (note that the stock
    gconfd-2 already reloaded the database when receiving a SIGHUP, but
    only in the periodic cleanup which ran every 30 seconds; I've
    modified it to reload the database immediately so that applications
    can be started right after they have been installed).

Presenting GNOME 2.14.1 for FreeBSD!  Checkout
http://www.gnome.org/start/2.14/ for the official release notes, and a list
of all the gooides in this new release.  In particular, GNOME 2.14 focused
on performance, and they did not miss the mark.  There's some new eye candy,
but most of the big things are waiting until GNOME 2.16.  On the FreeBSD
side, we tried to clean up all the crashers we could.  In particular, we
really improved GNOME's 64-bit support.

The good news is that this release does not bring any big shared library
version bumps, so you can almost do a simple portupgrade to get to 2.14.
There are a few minor gotchas that will be documented in UPDATING shortly.

The FreeBSD GNOME Team would like th thank the following users for their
patches, feedback, and sometimes incessant complaing about crashes (you
know who you are).

Conversion to a single libtool environment.

Approved by:    portmgr (kris)

Replace ugly "@unexec rmdir %D... 2>/dev/null || true" with @dirrmtry

Approved by:    krion@
PR:             ports/88711 (related)

- Add SHA256 checksums

- Put share/GConf under %%LDAP%%

PR:             ports/89026
Submitted by:   Boris B. Samorodov <bsam@ipt.ru>

Fix the build on 4.X.

PR:             88545
Submitted by:   Nicolas Rachinsky <nr@rachinsky.de>

Presenting GNOME 2.12 for FreeBSD.  The release is chock full of bug fixes
and new features.  Don't believe me?  Then see for yourself at
http://www.gnome.org/start/2.12/notes/en/.

DO NOT USE portupgrade by itself to upgrade to GNOME 2.12.  Instead, use
the gnome_upgrade.sh script from
http://www.marcuscom.com/downloads/gnome_upgrade212.sh.  This script will
circumvent some potential pitfalls users can see if they use portupgrade
by itself.

In keeping with tradition, GNOME 2.12 for FreeBSD comes with a special
splash screen.  The winner of this release's contest is
Dominique Goncalves <dominique.goncalves@gmail.com>.  His splash screen
was inspired by http://art.gnome.org/contests/2.12-splash/83.

Update to 2.10.1.

Presenting GNOME 2.10 for FreeBSD!

The release notes can be found at
http://www.gnome.org/start/2.10/notes/rnwhatsnew.html, and will give you a
good idea of what has gone into this release overall.  However, a lot of
FreeBSD specific additions and fixes have been made.  For example, this
release offers fixed ACPI support as well as new CPU freqeuncy monitoring
support.  See the FreeBSD GNOME 2.10 upgrade page at
http://www.FreeBSD.org/gnome/docs/faq210.html for the entire list as well
as a list of known issues and upgrade instructions.

GNOME 2.10, as well as all of our releases, would not be possible without
the great team that goes into porting and testign each and every component.
Thanks definitely goes out to ahze, adamw, bland, kwm, mezz, and pav for all
their work.  We would also like to thank our adventurous users that chose to

devel/gconf2
        Remove the post-install/pkg-install, since gnomehier is taking care of
        it.

devel/gnomevfs2
        Add pkg-install and pkg-deinstall to restore libgnome's gconf key if
        libgnome's .schemas exists. This fix the plist complained by pointyhat.

        Why restore libgnome's gconf key during the installtion if it exists?
        Because, libgnome always depend on gnomevfs2 so make sure the libgnome
        is still in the top when we either reinstall or upgrade gnomevfs2.

misc/gnomehier
        Remove the etc/gconf/gconf.xml.defaults/*, since the gconftool is
        taking care of it. ie: GCONF_SCHEMAS

x11/libgnome
        Add pkg-deinstall to restore gnomevfs2's gconf key if gnomevfs2's
        schemas exists. This fix the plist complained by pointyhat. Also, this
        is a real fix for the weird keyboard problem when you uninstall
        libgnome without reinstall it.

Bump the PORTREVISION in all of four ports above to fix everything with gconf
keys stuff for plist. Those have been tested in the MarcusCom CVS, GNOME
tinderbox, and my tinderbox.

Presenting GNOME 2.8 for FreeBSD (2.8.1 to be exact).

This release notes detailing all of the new goodies in GNOME 2.8 can
be found at http://www.gnome.org/start/2.8/notes/, and the list of what
was fixed in GNOME 2.8.1 can be found at
http://lists.gnome.org/archives/gnome-announce-list/2004-October/msg00056.html.

This release, as well as all of our others, would not have been possible
without the great efforts of our FreeBSD GNOME Team.  The list of
current members can be found at http://www.freebsd.org/gnome/contact.html
(including our newest member, Michael Johnson <ahze@FreeBSD.org>).

Special thanks also goes out to all of the loyal FreeBSD GNOME users that
put up with crashes and hangs to test and debug GNOME on FreeBSD.  We would
especially like to thank those users that provided patches for GNOME 2.7 and

Update to 2.6.4.

Apply a big libtool patch to allow porters to use the libtool installed by
the libtoolX ports instead of the one included with each port.  Ports that
set USE_LIBTOOL_VER=X will now use the ports version of libtool instead of
the included version.  To restore previous behavior, use the new macro,
USE_INC_LIBTOOL_VER.  Both macros accept the same argument: a libtool version.

For example, to use the ports version of libtool-1.5, add the following to
your Makefile:

USE_LIBTOOL_VER=        15

To use the included version of libtool with extra hacks provided by
libtool-1.5, add the following to your Makefile:

USE_INC_LIBTOOL_VER=    15

With this change, ports that had to add additional libtool hacks to prevent
.la files from being installed or to fix certain threading issues can now
delete those hacks (after appropriate testing, of course).

PR:             63944
Based on work by:eik and marcus
Approved by:    ade (autotools maintainer)
Tested by:      kris on pointyhat
Bound to be hidden problems:    You bet

Update to 2.6.3.

Update to 2.6.2.

Fix GConf on bigendian platforms (e.g. sparc64).  Thanks to
Koop Mast <kwm@rainbow-runner.nl> for providing access to the hardware needed
for debugging and testing.

Update to 2.6.1.

Presenting GNOME 2.6.0.  The FreeBSD GNOME Team feels this our best release
ever.  It fixes many bugs, and adds some features missing in previous
FreeBSD ports.  To help users upgrade from GNOME 2.4, we have constructed an
upgrade FAQ at:

http://www.freebsd.org/gnome/docs/faq26.html

Please read it carefully.  GNOME 2.6 packages are also available for all
supported i386 versions of FreeBSD at:

http://www.marcuscom.com/tinderbox/

The FreeBSD GNOME Team would like the thank the following users for their
wonderful testing and patching efforts.  We would especially like to thank
Franz Klammer <klammer@webonaut.com> for his wonderful new splash screen.
Without these people, our team, and our team alumni, GNOME on FreeBSD would
not be possible.

Jeremy Messenger <mezz7@cox.net>
Khairil Yusof <kaeru@pd.jaring.my>
Koop Mast <kwm@rainbow-runner.nl>
Simon Barner <barner@in.tum.de>
Tom McLaughlin <tmclaugh@sdf.lonestar.org>
Scott Dodson <sdodson@sdodson.com>
Vladimir Grebenschikov <vova@sw.ru>

- Add SIZE to GNOME ports

Submitted by:   trevor

Whoa there, boy, that's a mighty big commit y'all have there...

Begin autotools sanitization sequence by requiring ports to explicitly
specify which version of {libtool,autoconf,automake} they need, erasing
the concept of a "system default".

For ports-in-waiting:

        USE_LIBTOOL=YES         ->      USE_LIBTOOL_VER=13
        USE_AUTOCONF=YES        ->      USE_AUTOCONF_VER=213
        USE_AUTOMAKE=YES        ->      USE_AUTOMAKE_VER=14

Ports attempting to use the old style system after June 1st 2004 will be
sorely disappointed.

Bump PORTREVISION on all ports that depend on gettext to aid with upgrading.

(Part 2)

USE_REINPLACE need be defined only when REINPLACE_CMD is used.

Update to GNOME 2.4.0.  For all the goodies on what's changed, known issues,
future plans, etc., please see http://www.gnome.org/start/2.4/.

This commit represents work done by adamw, bland, and myself as well as
many other contributers:

Koop Mast <einekoai@chello.nl>
Akifyev Sergey <asa@gascom.ru>
Franz Klammer <klammer@webonaut.com>
?yvind Kolbu <oyvind@kebab.gaffel.nu>
Thomas E. Zander <riggs@rrr.de>
Jeremy Messenger <mezz7@cox.net>

Without these contirbuters, and our faithful users, GNOME 2.4.0 would not
be possible.

Please check the FreeBSD GNOME site for any FreeBSD gotchas, as well as
general FAQs and documentation (GNOME 2.4 updates to be posted soon).  The
best way to upgrade so that you get all shared library dependencies is:

portupgrade -rf -m BATCH=yes atk
portupgrade -R -m BATCH=yes gnome2

Approved by:    portmgr (kris, will, myself implicitly)
Requested by:   re as well as many other users

Update to 2.2.1.

Convert to new GNOME infrastructure.

Remove USE_GNOMENG.

Clear moonlight beckons.
Requiem mors pacem pkg-comment,
And be calm ports tree.

E Nomini Patri, E Fili, E Spiritu Sancti.

Update to GNOME 2.2.

This is Phase I.  All existing ports have been updated to their GNOME 2.2
counterparts.

GNOME has just changed the layout of their FTP site.  This resulted in
making all the distfiles unfetachable.  Update all GNOME ports that fetch
from MASTER_SITE_GNOME to fetch from the correct location.

Update to 1.2.1 (bug fixes and an added Bulgarian translation).

Use USE_REINPLACE.

The FreeBSD GNOME team is proud to present GNOME 2.0 Release.

Update to GNOME 2.0 Release Candidate 1...the "Fever Pitch" release.

Update to the latest GNOME 2 snapshot.  This will be done it two parts.
This first part is the GNOME 2 API.  The next part will contain the desktop
components.