| Port details |
- py-qt5-pyqt Python bindings for the Qt5 toolkit, QtCore module
- 5.15.11_1 devel
 =4      5.15.11Version of this port present on the latest quarterly branch. - Maintainer: kde@FreeBSD.org
- Port Added: 2022-01-27 07:15:07
- Last Update: 2025-03-08 14:05:10
- Commit Hash: a347a92
- People watching this port, also watch:: libXdamage, libevent, xcb-util-image, woff2, sndio
- Also Listed In: python
- License: GPLv3
- WWW:
- https://riverbankcomputing.com/software/pyqt
- Description:
- PyQt5 is a set of Python bindings for Qt5 application framework.
This package provides the QtCore module.
  ¦  ¦  ¦  ¦ 
- Manual pages:
- FreshPorts has no man page information for this port.
- pkg-plist: as obtained via:
make generate-plist - There is no configure plist information for this port.
- Dependency lines:
-
- ${PYTHON_PKGNAMEPREFIX}qt5-pyqt>0:devel/py-qt5-pyqt@${PY_FLAVOR}
- To install the port:
- cd /usr/ports/devel/py-qt5-pyqt/ && make install clean
- To add the package, run one of these commands:
- pkg install devel/py-qt5-pyqt
- pkg install py311-qt5-pyqt
NOTE: If this package has multiple flavors (see below), then use one of them instead of the name specified above.
NOTE: This is a Python port. Instead of py311-qt5-pyqt listed in the above command, you can pick from the names under the Packages section.- PKGNAME: py311-qt5-pyqt
- Package flavors (<flavor>: <package>)
- distinfo:
- TIMESTAMP = 1729214257
SHA256 (PyQt5-5.15.11.tar.gz) = fda45743ebb4a27b4b1a51c6d8ef455c4c1b5d610c90d2934c7802b5c1557c52
SIZE (PyQt5-5.15.11.tar.gz) = 3216775
Packages (timestamps in pop-ups are UTC):
- Dependencies
- NOTE: FreshPorts displays only information on required and default dependencies. Optional dependencies are not covered.
- Build dependencies:
-
- py311-dbus>1 : devel/py-dbus@py311
- pkgconf>=1.3.0_1 : devel/pkgconf
- python3.11 : lang/python311
- py311-PyQt5-sip>=12.17.0 : devel/py-qt5-sip@py311
- py311-PyQt-builder>=1.18.0 : devel/py-qtbuilder@py311
- py311-sip>=6.10.0,1 : devel/py-sip@py311
- xorgproto>=0 : x11/xorgproto
- qt5-buildtools>=5.15 : devel/qt5-buildtools
- designer : devel/qt5-designer
- libqtiff.so : graphics/qt5-imageformats
- qt5-qmake>=5.15 : devel/qt5-qmake
- Test dependencies:
-
- python3.11 : lang/python311
- py311-PyQt5-sip>=12.17.0 : devel/py-qt5-sip@py311
- Runtime dependencies:
-
- py311-dbus>1 : devel/py-dbus@py311
- python3.11 : lang/python311
- py311-PyQt5-sip>=12.17.0 : devel/py-qt5-sip@py311
- designer : devel/qt5-designer
- libqtiff.so : graphics/qt5-imageformats
- Library dependencies:
-
- libdbus-1.so : devel/dbus
- libGL.so : graphics/libglvnd
- libQt5Bluetooth.so : comms/qt5-connectivity
- libQt5Core.so : devel/qt5-core
- libQt5DBus.so : devel/qt5-dbus
- libQt5Qml.so : x11-toolkits/qt5-declarative
- libQt5Gui.so : x11-toolkits/qt5-gui
- libQt5Help.so : devel/qt5-help
- libQt5Location.so : devel/qt5-location
- libQt5Multimedia.so : multimedia/qt5-multimedia
- libQt5Network.so : net/qt5-network
- libQt5OpenGL.so : graphics/qt5-opengl
- libQt5PrintSupport.so : print/qt5-printsupport
- libQt5Quick3D.so : x11-toolkits/qt5-quick3d
- libQt5RemoteObjects.so : devel/qt5-remoteobjects
- libQt5Sensors.so : comms/qt5-sensors
- libQt5SerialPort.so : comms/qt5-serialport
- libQt5TextToSpeech.so : accessibility/qt5-speech
- libQt5Sql.so : databases/qt5-sql
- libQt5Svg.so : graphics/qt5-svg
- libQt5Test.so : devel/qt5-testlib
- libQt5WebChannel.so : www/qt5-webchannel
- libQt5WebSockets.so : www/qt5-websockets
- libQt5Widgets.so : x11-toolkits/qt5-widgets
- libQt5X11Extras.so : x11/qt5-x11extras
- libQt5Xml.so : textproc/qt5-xml
- libQt5XmlPatterns.so : textproc/qt5-xmlpatterns
- This port is required by:
- for Build
-
- audio/cadence
- audio/carla
- audio/qjackcapture
- biology/py-ete3
- comms/gnuradio
- deskutils/treeline
- devel/eric6
-
Deleted ports which required this port:
- for Run
-
- audio/cadence
- audio/carla
- audio/picard
- audio/puddletag
- audio/qjackcapture
- biology/py-ete3
- cad/py-pyfda
-
Deleted ports which required this port:
- * - deleted ports are only shown under the This port is required by section. It was harder to do for the Required section. Perhaps later...
Configuration Options:- No options to configure
- Options name:
- devel_py-qt5-pyqt
- USES:
- gl pkgconfig python pyqt:5,dist qt:5
- FreshPorts was unable to extract/find any pkg message
- Master Sites:
|
| Commit History - (may be incomplete: for full details, see links to repositories near top of page) |
| Commit | Credits | Log message |
|---|
5.15.11_1
08 Mar 2025 14:05:10
 |
Gleb Popov (arrowd) |
*: Bump revisions after dbus update
PR: 285253
Reported by: Martin Birgmeier <d8zNeCFG@aon.at> |
5.15.11
19 Oct 2024 06:35:03
|
Jason E. Hale (jhale) |
PyQt: Update to latest versions
PyQt5:
- devel/py-qt5-pyqt: Update to 5.15.11
- graphics/py-qt5-3d: Add port
- net/py-qt5-networkauth: Update to 5.15.6
- www/py-qt5-webengine: Update to 5.15.7
- x11-toolkits/py-qt5-chart: Update to 5.15.7
- x11-toolkits/py-qt5-datavis3d: Add port
PyQt6:
- devel/py-qt6-pyqt: Update to 6.7.1
Build tools:
- devel/sip: Update to 6.8.6
- devel/py-qt5-sip: Update to 12.15.0
- devel/py-qt6-sip: Update to 13.8.0
- devel/py-qtbuilder: Update to 1.16.4
The build tools are now all licensed BSD2CLAUSE and have been converted
to PEP517. |
5.15.10_2
19 Oct 2024 04:32:33
|
Jason E. Hale (jhale) |
*/*: Chase devel/qscintilla2 flavorization |
5.15.10_1
19 Oct 2024 04:32:17
|
Jason E. Hale (jhale) |
devel/qscintilla2*: Flavorize ports |
5.15.10_1
29 Jun 2024 05:02:34
|
Jason E. Hale (jhale) |
*/*: Add ${PY_SETUPTOOLS} to BUILD_DEPENDS
Fix build when setuptools is removed from RUN_DEPENDS in
Mk/Uses/python.mk.
PR: 270510
Approved by: portmgr (blanket) |
5.15.10_1
02 Dec 2023 02:09:35
|
Jason E. Hale (jhale) |
devel/py-qt5-pyqt: Disable QtWebKit bindings
www/qt5-webkit is set to expire 2023-12-31 and we no longer have ports
that require the QtWebKit python bindings.
PR: 273866
Reported by: <rkoberman@gmail.com> |
5.15.10
02 Nov 2023 00:29:38
|
Jason E. Hale (jhale) |
devel/py-qt5-pyqt: Sort pkg-plist |
5.15.10
29 Oct 2023 20:37:03
|
Jason E. Hale (jhale) |
Revert "devel/py-qt5-pyqt: mark DEPRECATED"
This reverts commit ccfab50ca9f05c3e7f61c3c3dd45f99a6b205cc9.
devel/py-qt5-pyqt is not going anywhere for the time being. @kde will
remove support for www/qt5-webkit from this port on or before its
EXPIRATION_DATE arrives. The WebKit module is easily disabled and there
are very few ports that rely on it. Maintainers have been notified. |
5.15.10
26 Oct 2023 17:57:14
|
Muhammad Moinur Rahman (bofh) |
devel/py-qt5-pyqt: mark DEPRECATED
- Depends on deprecated www/qt5-webkit
- Set EXPIRATION_DATE 2023-11-26
Approved by: portmgr (blanket) |
5.15.10
16 Oct 2023 23:57:45
|
Jason E. Hale (jhale) |
PyQt5: Update to latest versions
- PyQt5: Update to 5.15.10
- PyQt-builder: Update to 1.15.3
- PyQt5-sip: Update to 12.13.0
- sip: Update to 6.7.12 |
5.15.9_1
27 Jun 2023 19:34:34
|
Rene Ladan (rene) |
all: remove explicit versions in USES=python for "3.x+"
The logic in USES=python will automatically convert this to 3.8+ by
itself.
Adjust two ports that only had Python 3.7 mentioned but build fine
on Python 3.8 too.
finance/quickfix: mark BROKEN with PYTHON
libtool: compile: c++ -DHAVE_CONFIG_H -I. -I../.. -I -I. -I.. -I../.. -I../C++
-DLIBICONV_PLUG -DPYTHON_MAJOR_VERSION=3 -Wno-unused-variable
-Wno-maybe-uninitialized -O2 -pipe -DLIBICONV_PLUG -fstack-protector-strong
-fno-strict-aliasing -DLIBICONV_PLUG -Wall -ansi
-Wno-unused-command-line-argument -Wpointer-arith -Wwrite-strings
-Wno-overloaded-virtual -Wno-deprecated-declarations -Wno-deprecated -std=c++0x
-MT _quickfix_la-QuickfixPython.lo -MD -MP -MF
.deps/_quickfix_la-QuickfixPython.Tpo -c QuickfixPython.cpp -fPIC -DPIC -o
.libs/_quickfix_la-QuickfixPython.o
warning: unknown warning option '-Wno-maybe-uninitialized'; did you mean
'-Wno-uninitialized'? [-Wunknown-warning-option]
QuickfixPython.cpp:175:11: fatal error: 'Python.h' file not found
^~~~~~~~~~
1 warning and 1 error generated.
Reviewed by: portmgr, vishwin, yuri
Differential Revision: <https://reviews.freebsd.org/D40568> |
5.15.9_1
25 Apr 2023 15:17:15
|
Christian Weisgerber (naddy) |
audio/opus: bump consumers after update to 1.4 |
5.15.9
09 Mar 2023 11:15:07
|
Loïc Bartoletti (lbartoletti) |
PyQt: Update to latest versions
- PyQt5: update to 5.15.9
- PyQt6: upate to 6.4.2
- PyQt6-sip: update to 13.4.1
- PyQt5-sip: update to 12.11.1
- PyQt-builder: update to 1.14.1
- sip: upate to 6.7.7
PR: 269751
Exp-run by: antoine |
5.15.7
09 Nov 2022 09:47:49
|
Guido Falsi (madpilot) |
*/*pyqt*: Add pyqt6 ports
Reviewed by: tcberner, lbartoletti, fluffy
Approved by: kde (tcberner, lbartoletti, fluffy), portmgr (tcberner)
Differential Revision: https://reviews.freebsd.org/D37191 |
5.15.7_1
09 Nov 2022 08:47:51
|
Guido Falsi (madpilot) |
devel/py-qt5-pyqt: Fix plist issue
PR: 267645
Approved by: kde (tcberner) |
5.15.7
02 Nov 2022 06:41:07
|
Loïc Bartoletti (lbartoletti) |
*/*: Update PyQt, Sip, QSCintlla2
PR: 267203
Exp-run by: antoine |
5.15.6_1
11 Sep 2022 10:20:14
|
Felix Palmen (zirias) |
Mk/Uses: always use colon for build/run suffix
Most USES use a colon for build/run(/test) suffixes. Change kde.mk,
qt.mk and pyqt.mk to do the same, and update all ports using that.
Document in CHANGES.
PR: 266034
Exp-run by: antoine
Approved by: tcberner (mentor)
Differential Revision: https://reviews.freebsd.org/D36349 |
07 Sep 2022 21:58:51
|
Stefan Eßer (se) |
Remove WWW entries moved into port Makefiles
Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.
This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.
Approved by: portmgr (tcberner) |
5.15.6_1
07 Sep 2022 21:10:59
|
Stefan Eßer (se) |
Add WWW entries to port Makefiles
It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.
Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.
There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.
(Only the first 15 lines of the commit message are shown above  ) |
5.15.6_1
03 Jun 2022 09:01:06
|
Po-Chuan Hsieh (sunpoet) |
devel/py-qt5-pyqt: Use common pattern in *_DEPENDS for py-* ports
With hat: python |
5.15.6_1
29 May 2022 16:35:09
|
Dima Panov (fluffy) |
devel/py-qt5-pyqt: fix flavors use (+)
This ia s quick followup to commit 78e416d826472fd8eca9f3cf702e171914443273
which introduced hard dependency to py-dbus module with missed flavor pointers
Pointy hat to: adridg |
5.15.6_1
29 May 2022 11:16:33
|
Adriaan de Groot (adridg) |
devel/py-qt5-pyqt: add DBus dependency
This makes DBus explicitly available when installing py-qt5-pyqt,
which is good for desktop use. Previously, building this with
DBus installed **and** pkgconfig and the Python DBus bindings
would trip up in `check-plist`.
PR: 261717
Reported by: John Hein |
5.15.6_1
28 Mar 2022 05:22:22
|
Loïc Bartoletti (lbartoletti) |
devel/qscintilla-qt5: Update to 2.13.2
Change:
- https://riverbankcomputing.com/news/QScintilla_2.13.2_Released |
5.15.6
07 Mar 2022 17:39:13
|
Loïc Bartoletti (lbartoletti) |
devel/py-qt5, devel/py-sip: Update versions
- Update sip to 6.5.1
- Update PyQt5 to 5.15.6
- Update PyQtChart, PyQtNetworkAuth and PyQtWebengine to 5.15.5
- Update PyQtSip to 12.9.1
- Update PyQtBuilder to 1.12.2
- Add ${_MAKE_JOBS} for pyqt.mk (reported by Tatsuki Makino)
PR: 261685
Exp-run by: antoine |
5.15.4_4
27 Jan 2022 20:12:33
|
Loïc Bartoletti (lbartoletti) |
*/*: Update qscintilla2 to 2.13.1
Changes:
- https://riverbankcomputing.com/news/QScintilla_2.13.1_Released |
5.15.4_3
27 Jan 2022 06:12:26
|
Loïc Bartoletti (lbartoletti) |
PyQt: Update sip to 6.5.0, reintroduce sip4 and simplify PyQt framework.
SIP:
As mentioned in the update from sip to sip5, this is a transitional version
to remove what is deprecated in sip4.
Sip6 completely removes the deprecated parts.
Unfortunately, some ports — mostly cura things — can not use sip6, so we
reintroduce sip4.
PyQt:
At the same time, we took the opportunity to simplify PyQT and propose only one
package as for devel/pyside2. */py-qt5-* have been merged — excepted chart,
networkauth and webengine — into devel/py-qt5-pyqt.
This allows us to be in adequacy with the packages that the author of these (Only the first 15 lines of the commit message are shown above ) |
As an Amazon Associate I earn from qualifying purchases.