This package provides the X11 Inter-Client Exchange library, which
allows for communication of data between X clients.
There are numerous possible inter-client protocols, with many
similarities and common needs - authentication, version negotiation,
byte order negotiation, and so on. The Inter-Client Exchange (ICE)
protocol is intended to provide a framework for building such
protocols, allowing them to make use of common negotiation mechanisms
and to be multiplexed over a single transport connection.
x11/xtrans: Don't unlink X11 Unix sockets.
Without this change calling `Xorg -displayfd ..` would always make X to use
:0 as the DISPLAY. This was a showstopper for running parallel desktop sessions.
The leftover UDS' are cleaned up during system's boot by the /etc/rc.d/cleartmp
service.
Based on work of jbeich and Olivier Certner <olivier.freebsd@free.fr>.
PR: 253277
Approved by: manu
Sponsored by: Serenity Cybersecurity, LLC
Differential Revision: https://reviews.freebsd.org/D30557
x11/libICE: Fix C++ interoperability error due to static_assert define (+)
Backport critical fix from upstream.
Upstream commit 0269c687 added a static_assert helper
that gets defined to blank if left undefined by assert.h.
As this is not a macro in other languages that use this header,
this can lead to a compile-time error.
See
also: https://gitlab.freedesktop.org/xorg/lib/libice/-/commit/e176b676cff17948d68299c00dddefe41638c752
Pointy hat to: manu (for skipped exp-run)
Approved by: portmgr blanket
Remove WWW entries moved into port Makefiles
Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.
This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.
Approved by: portmgr (tcberner)
Add WWW entries to port Makefiles
It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.
Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.
There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.
(Only the first 15 lines of the commit message are shown above )
Switch all ports to use USES=xorg-cat
Change all ports to use USES=xorg-cat instead of the old XORG_CAT
Add USES=xorg and USES=gl as needed to x11@ ports
Change x11/xorgproto to become a build dep
Change x11/xorgproto to become a build time dependency when added to
USE_XORG. Change the dependency to be on the port, rather than a file the
port installs.
Fix fallout.
Bump portrevision on depending ports.
PR: 230909
Reviewed by: eadler
Approved by: portmgr (antoine)
Obtained
from: https://github.com/FreeBSDDesktop/freebsd-ports/tree/feature/xorgproto
exp-run: antoine
Differential Revision: https://reviews.freebsd.org/D16906
Switch to xorgproto instead of individual packages
Upstream used to distribute protocol headers as separate packages, but has
decided to merge those to a common package, named xorgproto. This update
tracks that change.
* Add a new port, x11/xorgproto, with are protocol headers for xorg.
* Hook the new protocol port to the build and to infrastructure in
bsd.xorg.mk.
* Update all ports with a dependency on any of the old *proto packages to
instead depend on xorgproto. Bump portrevision.
* Delete the old *proto packages, update MOVED.
PR: 230023
Submitted by: zeising
Approved by: portmgr (antoine)
exp-run by: antoine
Misc X.org port updates:
Update gccmakedep to 1.0.3.
Update imake to 1.0.7.
Update libpciaccess to 0.13.3.
Update libdrm to 2.4.60.
Update bitmap to 1.0.8.
Update fstobdf to 1.0.6.
Update iceauth to 1.0.7.
Update libXdmcp to 1.1.2.
Update libXp to 1.0.3.
Update libXvMC to 1.0.9.
Update libXxf86vm to 1.1.4.
Update libxshmfence to 1.2.
Update randrproto to 1.4.1.
(Only the first 15 lines of the commit message are shown above )
When linking a library libA with a library libB using libtool, if libB.la
exists, libtool will add all libraries libB.la refers to (dependency_libs
field) to the linker command line and store them in the dependency_libs
field of libA.la. So everything that subsequently links with libA will also
link to these extra libraries. This causes too much overlinking.
This commit modifies Mk/Uses/libtool.mk so it empties the dependency_libs
field in .la libraries during staging. However, because .la libraries have
very limited use when dependency_libs is empty it makes sense to completely
remove them during staging.
So with this commit USES=libtool is modified to remove .la libraries and a
new form (USES=libtool:keepla) is introduced in case they need to be kept
(dependency_libs is still emptied).
(Only the first 15 lines of the commit message are shown above )
The FreeBSD x11@ and graphics team proudly presents
a zeising, kwm production, with help from dumbbell, bdrewery:
NEW XORG ON FREEBSD 9-STABLE AND 10-STABLE
This update switches over to use the new xorg stack by default on FreeBSD 9
and 10 stable, on osversions where vt(9) is available.
It is still possible to use the old stack by specifying WITHOUT_NEW_XORG in
/etc/make.conf .
FreeBSD 8-STABLE and released versions of FreeBSD still use
the old version.
A package repository with binary packages for new xorg will
be available soon.
This patch also contains updates of libxcb and related ports, pixman, as well
(Only the first 15 lines of the commit message are shown above )
The FreeBSD x11 team proudly presents
an zeising, kwm, miwi, bapt, eadler production:
Xorg 7.7
Starring:
xserver 1.12.4 (new xorg only)
Mesa 8.0.4, including libGL, libGLU and dri (new xorg only)
libX11 1.5.0
libxcb 1.9
libdrm 2.4.42 (new xorg only)
freeglut 2.8.1
Also starring:
Updates to drivers and other libraries and utilities
(Only the first 15 lines of the commit message are shown above )
- Please welcome Xorg 7.5.1
The X-Server has been patched to the latest 1.7.X series, drivers
and fonts have been updated to the latest versions. This update includes
some components from Xorg 7.6 with a lot of improvements, and it seems
that the performance is much better than the old version. Also this
Update fix build issues with clang and binutils 2.17.50 in current,
remove 6.X gruft and de-author pkg-descr.
I would like to thank:
Beat Gaetzi
Dima Panov
Koop Mast
Eitan Adler
and all Testers.
PR: ports/147646ports/148035ports/148744ports/150223ports/152889ports/154457
- Update to Xorg 7.5
The Intel drivers was patched to work with
the new server. The drivers for Vesa, NV,NVIDIA and
ATI have been tested thoroughfully and seem to work fine.
A complete changelog of Xorg 7.5 can you read here:
http://www.x.org/releases/X11R7.5/
A note to FreeBSD 6.X users: We strongly recommend you
to update your system to 7.x or above.
For updating try
portupgrade -af \*
(Only the first 15 lines of the commit message are shown above )
- Mark xtrans as a BUILD_DEPENDS only (unless specified otherwise with :both)
- Bump PORTREVISION on ports having xtrans in USE_XORG.
- Add some missing dependencies in various xorg libraries.
- Update X.org ports to 7.3.
- Mark XFree86-4 as DEPRECATED with EXPIRATION_DATE set to 2007-12-25.
I hope that nobody will be bored enough on Christmas to remove them on
that day.
Tested by: vehemens, Rene Ladan, Beech Rintoul, sarek on x11@
Mass-conversion to the USE_AUTOTOOLS New World Order. The code present
in bsd.autotools.mk essentially makes this a no-op given that all the
old variables set a USE_AUTOTOOLS_COMPAT variable, which is parsed in
exactly the same way as USE_AUTOTOOLS itself.
Moreover, USE_AUTOTOOLS has already been extensively tested by the GNOME
team -- all GNOME 2.12.x ports use it.
Preliminary documentation can be found at:
http://people.FreeBSD.org/~ade/autotools.txt
which is in the process of being SGMLized before introduction into the
Porters Handbook.
Light blue touch-paper. Run.
Apply a big libtool patch to allow porters to use the libtool installed by
the libtoolX ports instead of the one included with each port. Ports that
set USE_LIBTOOL_VER=X will now use the ports version of libtool instead of
the included version. To restore previous behavior, use the new macro,
USE_INC_LIBTOOL_VER. Both macros accept the same argument: a libtool version.
For example, to use the ports version of libtool-1.5, add the following to
your Makefile:
USE_LIBTOOL_VER= 15
To use the included version of libtool with extra hacks provided by
libtool-1.5, add the following to your Makefile:
USE_INC_LIBTOOL_VER= 15
With this change, ports that had to add additional libtool hacks to prevent
.la files from being installed or to fix certain threading issues can now
delete those hacks (after appropriate testing, of course).
PR: 63944
Based on work by:eik and marcus
Approved by: ade (autotools maintainer)
Tested by: kris on pointyhat
Bound to be hidden problems: You bet
libICE doesn't link to libX11 directly, but one of its utility headers
does include Xlib.h, so put the x11 dependency back in.
Reported by: kris (bento)
Whoa there, boy, that's a mighty big commit y'all have there...
Begin autotools sanitization sequence by requiring ports to explicitly
specify which version of {libtool,autoconf,automake} they need, erasing
the concept of a "system default".
For ports-in-waiting:
USE_LIBTOOL=YES -> USE_LIBTOOL_VER=13
USE_AUTOCONF=YES -> USE_AUTOCONF_VER=213
USE_AUTOMAKE=YES -> USE_AUTOMAKE_VER=14
Ports attempting to use the old style system after June 1st 2004 will be
sorely disappointed.
New port: Prerelease version of libICE from freedesktop.org:
Inter Client Exchange library for X11
Testing is encouraged, but please do not use these ports as dependencies until
they are updated to release tarballs and the XFree86 ports have been updated to
depend on them.
